| /* |
| * Copyright (c) 2022 Vestas Wind Systems A/S |
| * Copyright (c) 2022 Alexander Wachter |
| * Copyright (c) 2019 Intel Corporation. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| */ |
| |
| #include <zephyr/net/net_pkt.h> |
| #include <zephyr/net/canbus.h> |
| #include <zephyr/net/socket_can.h> |
| #include <zephyr/drivers/can.h> |
| #include <zephyr/devicetree.h> |
| #include <zephyr/device.h> |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(net_canbus, CONFIG_NET_CANBUS_LOG_LEVEL); |
| |
| #define SEND_TIMEOUT K_MSEC(100) |
| |
| struct net_canbus_context { |
| struct net_if *iface; |
| }; |
| |
| struct net_canbus_config { |
| const struct device *can_dev; |
| }; |
| |
| static void net_canbus_recv(const struct device *dev, struct zcan_frame *frame, void *user_data) |
| { |
| struct net_canbus_context *ctx = user_data; |
| struct net_pkt *pkt; |
| int ret; |
| |
| ARG_UNUSED(dev); |
| |
| LOG_DBG("pkt on interface %p", ctx->iface); |
| pkt = net_pkt_rx_alloc_with_buffer(ctx->iface, sizeof(struct zcan_frame), |
| AF_CAN, 0, K_NO_WAIT); |
| if (pkt == NULL) { |
| LOG_ERR("Failed to obtain net_pkt"); |
| return; |
| } |
| |
| if (net_pkt_write(pkt, frame, sizeof(struct zcan_frame))) { |
| LOG_ERR("Failed to append RX data"); |
| net_pkt_unref(pkt); |
| return; |
| } |
| |
| ret = net_recv_data(ctx->iface, pkt); |
| if (ret < 0) { |
| LOG_DBG("net_recv_data failed [%d]", ret); |
| net_pkt_unref(pkt); |
| } |
| } |
| |
| static int net_canbus_setsockopt(const struct device *dev, void *obj, int level, |
| int optname, const void *optval, socklen_t optlen) |
| { |
| const struct net_canbus_config *cfg = dev->config; |
| struct net_canbus_context *context = dev->data; |
| struct net_context *ctx = obj; |
| int ret; |
| |
| if (level != SOL_CAN_RAW && optname != CAN_RAW_FILTER) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| __ASSERT_NO_MSG(optlen == sizeof(struct zcan_filter)); |
| |
| ret = can_add_rx_filter(cfg->can_dev, net_canbus_recv, context, optval); |
| if (ret == -ENOSPC) { |
| errno = ENOSPC; |
| return -1; |
| } |
| |
| net_context_set_filter_id(ctx, ret); |
| |
| return 0; |
| } |
| |
| static void net_canbus_close(const struct device *dev, int filter_id) |
| { |
| const struct net_canbus_config *cfg = dev->config; |
| |
| can_remove_rx_filter(cfg->can_dev, filter_id); |
| } |
| |
| static void net_canbus_send_tx_callback(const struct device *dev, int error, void *user_data) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(user_data); |
| |
| if (error != 0) { |
| LOG_DBG("CAN bus TX error [%d]", error); |
| } |
| } |
| |
| static int net_canbus_send(const struct device *dev, struct net_pkt *pkt) |
| { |
| const struct net_canbus_config *cfg = dev->config; |
| int ret; |
| |
| if (net_pkt_family(pkt) != AF_CAN) { |
| return -EPFNOSUPPORT; |
| } |
| |
| ret = can_send(cfg->can_dev, (struct zcan_frame *)pkt->frags->data, |
| SEND_TIMEOUT, net_canbus_send_tx_callback, NULL); |
| |
| if (ret == 0) { |
| net_pkt_unref(pkt); |
| } else { |
| LOG_DBG("Cannot send CAN msg (%d)", ret); |
| } |
| |
| /* If something went wrong, then we need to return negative value to |
| * net_if.c:net_if_tx() so that the net_pkt will get released. |
| */ |
| return ret; |
| } |
| |
| static void net_canbus_iface_init(struct net_if *iface) |
| { |
| const struct device *dev = net_if_get_device(iface); |
| struct net_canbus_context *context = dev->data; |
| |
| context->iface = iface; |
| |
| LOG_DBG("Init CAN interface %p dev %p", iface, dev); |
| } |
| |
| static int net_canbus_init(const struct device *dev) |
| { |
| const struct net_canbus_config *cfg = dev->config; |
| |
| if (!device_is_ready(cfg->can_dev)) { |
| LOG_ERR("CAN device not ready"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static struct canbus_api net_canbus_api = { |
| .iface_api.init = net_canbus_iface_init, |
| .send = net_canbus_send, |
| .close = net_canbus_close, |
| .setsockopt = net_canbus_setsockopt, |
| }; |
| |
| static struct net_canbus_context net_canbus_ctx; |
| |
| static const struct net_canbus_config net_canbus_cfg = { |
| .can_dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_canbus)) |
| }; |
| |
| NET_DEVICE_INIT(net_canbus, "NET_CANBUS", net_canbus_init, NULL, &net_canbus_ctx, &net_canbus_cfg, |
| CONFIG_NET_CANBUS_INIT_PRIORITY, &net_canbus_api, CANBUS_RAW_L2, |
| NET_L2_GET_CTX_TYPE(CANBUS_RAW_L2), CAN_MTU); |