| # IEEE 802.15.4 driver configuration options |
| |
| # Copyright (c) 2015 Intel Corporation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # |
| # IEEE 802.15.4 options |
| # |
| menuconfig IEEE802154 |
| bool "IEEE 802.15.4 drivers" |
| depends on NETWORKING |
| default y if NET_L2_PHY_IEEE802154 |
| |
| if IEEE802154 |
| |
| config IEEE802154_NET_IF_NO_AUTO_START |
| bool "IEEE 802.15.4 interface without auto-start" |
| help |
| This option allows user to set any configuration and/or filter before |
| the radio becomes operational. For instance, the EUI-64 value can be |
| configured using net_if_set_link_addr(iface, mac, 8, |
| NET_LINK_IEEE802154). |
| When all configurations are done net_if_up() has to be invoked to |
| bring the interface up. |
| |
| This option can be useful when using OpenThread or Zigbee. If you |
| have any doubt about this option leave it as default value. |
| |
| if !NET_L2_PHY_IEEE802154 |
| config IEEE802154_RAW_MODE |
| bool "IEEE 802.15.4 driver without the MAC stack" |
| select NET_RAW_MODE |
| help |
| This option enables using the drivers in a so-called "raw" mode, |
| i.e. without a MAC stack (the net L2 layer for 802.15.4 will not |
| be built). Used only for very specific cases, such as wpan_serial |
| and wpanusb samples. |
| endif # !NET_L2_PHY_IEEE802154 |
| |
| config IEEE802154_RDEV |
| bool |
| help |
| PHY is a ranging-capable device (RDEV) |
| |
| config IEEE802154_VENDOR_OUI_ENABLE |
| bool "Support setting Vendor Organizationally Unique Identifier" |
| help |
| This option enables setting custom vendor |
| OUI using IEEE802154_VENDOR_OUI. After enabling, |
| user is obliged to set IEEE802154_VENDOR_OUI value, |
| as this option has no default value. |
| |
| if IEEE802154_VENDOR_OUI_ENABLE |
| |
| config IEEE802154_VENDOR_OUI |
| int "Vendor Organizationally Unique Identifier" |
| help |
| Custom vendor OUI, which makes 24 most-significant |
| bits of MAC address |
| |
| endif # IEEE802154_VENDOR_OUI_ENABLE |
| |
| source "drivers/ieee802154/Kconfig.b91" |
| |
| source "drivers/ieee802154/Kconfig.cc2520" |
| |
| source "drivers/ieee802154/Kconfig.kw41z" |
| |
| source "drivers/ieee802154/Kconfig.mcr20a" |
| |
| source "drivers/ieee802154/Kconfig.nrf5" |
| |
| source "drivers/ieee802154/Kconfig.cc1200" |
| |
| source "drivers/ieee802154/Kconfig.cc13xx_cc26xx" |
| |
| source "drivers/ieee802154/Kconfig.rf2xx" |
| |
| source "drivers/ieee802154/Kconfig.dw1000" |
| |
| source "drivers/ieee802154/Kconfig.uart_pipe" |
| |
| config IEEE802154_CSL_ENDPOINT |
| bool "Support for CSL Endpoint" |
| help |
| Make this device a CSL (coordinated sampled listening) endpoint with delayed |
| reception handling and CSL IE injection. |
| |
| config IEEE802154_CSL_DEBUG |
| bool "Support for CSL debugging" |
| depends on IEEE802154_CSL_ENDPOINT |
| help |
| Enable support for CSL debugging by avoiding sleep state in favor of receive state. |
| |
| config IEEE802154_SELECTIVE_TXCHANNEL |
| bool "Support for selective TX channel setting" |
| help |
| Enable support for selectively setting TX channel for every timed transmission request. |
| The drivers MAY have the capability IEEE802154_HW_SELECTIVE_TXCHANNEL only if |
| this Kconfig option is enabled. If the Kconfig option is disabled the drivers |
| MUST NOT have the capability. |
| |
| module = IEEE802154_DRIVER |
| module-str = IEEE 802.15.4 driver |
| module-help = Sets log level for IEEE 802.15.4 Device Drivers. |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| endif # IEEE802154 |
