| /* |
| * |
| * Copyright (c) 2018, NXP |
| |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT nxp_kinetis_wdog |
| |
| #include <zephyr/drivers/watchdog.h> |
| #include <zephyr/drivers/clock_control.h> |
| #include <zephyr/irq.h> |
| #include <fsl_wdog.h> |
| |
| #define LOG_LEVEL CONFIG_WDT_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(wdt_mcux_wdog); |
| |
| #define MIN_TIMEOUT 4 |
| |
| struct mcux_wdog_config { |
| WDOG_Type *base; |
| const struct device *clock_dev; |
| clock_control_subsys_t clock_subsys; |
| void (*irq_config_func)(const struct device *dev); |
| }; |
| |
| struct mcux_wdog_data { |
| wdt_callback_t callback; |
| wdog_config_t wdog_config; |
| bool timeout_valid; |
| }; |
| |
| static int mcux_wdog_setup(const struct device *dev, uint8_t options) |
| { |
| const struct mcux_wdog_config *config = dev->config; |
| struct mcux_wdog_data *data = dev->data; |
| WDOG_Type *base = config->base; |
| |
| if (!data->timeout_valid) { |
| LOG_ERR("No valid timeouts installed"); |
| return -EINVAL; |
| } |
| |
| data->wdog_config.workMode.enableStop = |
| (options & WDT_OPT_PAUSE_IN_SLEEP) == 0U; |
| |
| data->wdog_config.workMode.enableDebug = |
| (options & WDT_OPT_PAUSE_HALTED_BY_DBG) == 0U; |
| |
| WDOG_Init(base, &data->wdog_config); |
| LOG_DBG("Setup the watchdog"); |
| |
| return 0; |
| } |
| |
| static int mcux_wdog_disable(const struct device *dev) |
| { |
| const struct mcux_wdog_config *config = dev->config; |
| struct mcux_wdog_data *data = dev->data; |
| WDOG_Type *base = config->base; |
| |
| WDOG_Deinit(base); |
| data->timeout_valid = false; |
| LOG_DBG("Disabled the watchdog"); |
| |
| return 0; |
| } |
| |
| static int mcux_wdog_install_timeout(const struct device *dev, |
| const struct wdt_timeout_cfg *cfg) |
| { |
| const struct mcux_wdog_config *config = dev->config; |
| struct mcux_wdog_data *data = dev->data; |
| uint32_t clock_freq; |
| |
| if (data->timeout_valid) { |
| LOG_ERR("No more timeouts can be installed"); |
| return -ENOMEM; |
| } |
| |
| if (!device_is_ready(config->clock_dev)) { |
| LOG_ERR("clock control device not ready"); |
| return -ENODEV; |
| } |
| |
| if (clock_control_get_rate(config->clock_dev, config->clock_subsys, |
| &clock_freq)) { |
| return -EINVAL; |
| } |
| |
| WDOG_GetDefaultConfig(&data->wdog_config); |
| |
| data->wdog_config.timeoutValue = clock_freq * cfg->window.max / 1000U; |
| |
| if (cfg->window.min) { |
| data->wdog_config.enableWindowMode = true; |
| data->wdog_config.windowValue = |
| clock_freq * cfg->window.min / 1000U; |
| } else { |
| data->wdog_config.enableWindowMode = false; |
| data->wdog_config.windowValue = 0; |
| } |
| |
| if ((data->wdog_config.timeoutValue < MIN_TIMEOUT) || |
| (data->wdog_config.timeoutValue < data->wdog_config.windowValue)) { |
| LOG_ERR("Invalid timeout"); |
| return -EINVAL; |
| } |
| |
| data->wdog_config.clockSource = kWDOG_LpoClockSource; |
| data->wdog_config.enableInterrupt = cfg->callback != NULL; |
| data->callback = cfg->callback; |
| data->timeout_valid = true; |
| |
| return 0; |
| } |
| |
| static int mcux_wdog_feed(const struct device *dev, int channel_id) |
| { |
| const struct mcux_wdog_config *config = dev->config; |
| WDOG_Type *base = config->base; |
| |
| if (channel_id != 0) { |
| LOG_ERR("Invalid channel id"); |
| return -EINVAL; |
| } |
| |
| WDOG_Refresh(base); |
| LOG_DBG("Fed the watchdog"); |
| |
| return 0; |
| } |
| |
| static void mcux_wdog_isr(const struct device *dev) |
| { |
| const struct mcux_wdog_config *config = dev->config; |
| struct mcux_wdog_data *data = dev->data; |
| WDOG_Type *base = config->base; |
| uint32_t flags; |
| |
| flags = WDOG_GetStatusFlags(base); |
| WDOG_ClearStatusFlags(base, flags); |
| |
| if (data->callback) { |
| data->callback(dev, 0); |
| } |
| } |
| |
| static int mcux_wdog_init(const struct device *dev) |
| { |
| const struct mcux_wdog_config *config = dev->config; |
| |
| config->irq_config_func(dev); |
| |
| return 0; |
| } |
| |
| static const struct wdt_driver_api mcux_wdog_api = { |
| .setup = mcux_wdog_setup, |
| .disable = mcux_wdog_disable, |
| .install_timeout = mcux_wdog_install_timeout, |
| .feed = mcux_wdog_feed, |
| }; |
| |
| static void mcux_wdog_config_func_0(const struct device *dev); |
| |
| static const struct mcux_wdog_config mcux_wdog_config_0 = { |
| .base = (WDOG_Type *) DT_INST_REG_ADDR(0), |
| .clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(0)), |
| .clock_subsys = (clock_control_subsys_t) |
| DT_INST_CLOCKS_CELL(0, name), |
| .irq_config_func = mcux_wdog_config_func_0, |
| }; |
| |
| static struct mcux_wdog_data mcux_wdog_data_0; |
| |
| DEVICE_DT_INST_DEFINE(0, |
| &mcux_wdog_init, |
| NULL, |
| &mcux_wdog_data_0, &mcux_wdog_config_0, |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &mcux_wdog_api); |
| |
| static void mcux_wdog_config_func_0(const struct device *dev) |
| { |
| IRQ_CONNECT(DT_INST_IRQN(0), |
| DT_INST_IRQ(0, priority), |
| mcux_wdog_isr, DEVICE_DT_INST_GET(0), 0); |
| |
| irq_enable(DT_INST_IRQN(0)); |
| } |