| /* |
| * The Mass Storage protocol state machine in this file is based on mbed's |
| * implementation. We augment it by adding Zephyr's USB transport and Storage |
| * APIs. |
| * |
| * Copyright (c) 2010-2011 mbed.org, MIT License |
| * Copyright (c) 2016 Intel Corporation. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| |
| /** |
| * @file |
| * @brief Mass Storage device class driver |
| * |
| * Driver for USB Mass Storage device class driver |
| */ |
| |
| #include <init.h> |
| #include <errno.h> |
| #include <string.h> |
| #include <misc/__assert.h> |
| #include <disk_access.h> |
| #include "mass_storage.h" |
| #include "usb_device.h" |
| #include "usb_common.h" |
| |
| #define SYS_LOG_LEVEL CONFIG_SYS_LOG_USB_MASS_STORAGE_LEVEL |
| #include <logging/sys_log.h> |
| |
| /* Misc. macros */ |
| #define LOW_BYTE(x) ((x) & 0xFF) |
| #define HIGH_BYTE(x) ((x) >> 8) |
| |
| /* max USB packet size */ |
| #define MAX_PACKET MASS_STORAGE_BULK_EP_MPS |
| |
| #define BLOCK_SIZE 512 |
| #define DISK_THREAD_STACK_SZ 512 |
| #define DISK_THREAD_PRIO -5 |
| |
| static volatile int thread_op; |
| static char __stack mass_thread_stack[DISK_THREAD_STACK_SZ]; |
| static struct k_sem disk_wait_sem; |
| static volatile u32_t defered_wr_sz; |
| |
| static u8_t page[BLOCK_SIZE]; |
| |
| /* Initialized during mass_storage_init() */ |
| static u32_t memory_size; |
| static u32_t block_count; |
| |
| /* CSW Status */ |
| enum Status { |
| CSW_PASSED, |
| CSW_FAILED, |
| CSW_ERROR, |
| }; |
| |
| /* MSC Bulk-only Stage */ |
| enum Stage { |
| READ_CBW, /* wait a CBW */ |
| ERROR, /* error */ |
| PROCESS_CBW, /* process a CBW request */ |
| SEND_CSW, /* send a CSW */ |
| WAIT_CSW /* wait that a CSW has been effectively sent */ |
| }; |
| |
| /* state of the bulk-only state machine */ |
| static enum Stage stage; |
| |
| /*current CBW*/ |
| static struct CBW cbw; |
| |
| /*CSW which will be sent*/ |
| static struct CSW csw; |
| |
| /*addr where will be read or written data*/ |
| static u32_t addr; |
| |
| /*length of a reading or writing*/ |
| static u32_t length; |
| |
| static u8_t max_lun_count; |
| |
| /*memory OK (after a memoryVerify)*/ |
| static bool memOK; |
| |
| /* Structure representing the global USB description */ |
| static const u8_t mass_usb_description[] = { |
| /* Device descriptor */ |
| USB_DEVICE_DESC_SIZE, /* Descriptor size */ |
| USB_DEVICE_DESC, /* Descriptor type */ |
| LOW_BYTE(USB_1_1), |
| HIGH_BYTE(USB_1_1), /* USB version in BCD format */ |
| 0x00, /* Class - Interface*/ |
| 0x00, /* SubClass - Interface specific */ |
| 0x00, /* Protocol - Interface specific */ |
| MAX_PACKET_SIZE0, /* Max Packet Size */ |
| LOW_BYTE(MASS_STORAGE_VENDOR_ID), |
| HIGH_BYTE(MASS_STORAGE_VENDOR_ID), /* Vendor Id */ |
| LOW_BYTE(MASS_STORAGE_PRODUCT_ID), |
| HIGH_BYTE(MASS_STORAGE_PRODUCT_ID), /* Product Id */ |
| LOW_BYTE(BCDDEVICE_RELNUM), |
| HIGH_BYTE(BCDDEVICE_RELNUM), /* Device Release Number */ |
| /* Index of Manufacturer String Descriptor */ |
| 0x01, |
| /* Index of Product String Descriptor */ |
| 0x02, |
| /* Index of Serial Number String Descriptor */ |
| 0x03, |
| MASS_NUM_CONF, /* Number of Possible Configuration */ |
| |
| /* Configuration descriptor */ |
| USB_CONFIGURATION_DESC_SIZE, /* Descriptor size */ |
| USB_CONFIGURATION_DESC, /* Descriptor type */ |
| /* Total length in bytes of data returned */ |
| LOW_BYTE(MASS_CONF_SIZE), |
| HIGH_BYTE(MASS_CONF_SIZE), |
| MASS_NUM_ITF, /* Number of interfaces */ |
| 0x01, /* Configuration value */ |
| 0x00, /* Index of the Configuration string */ |
| USB_CONFIGURATION_ATTRIBUTES, /* Attributes */ |
| MAX_LOW_POWER, /* Max power consumption */ |
| |
| /* Interface descriptor */ |
| USB_INTERFACE_DESC_SIZE, /* Descriptor size */ |
| USB_INTERFACE_DESC, /* Descriptor type */ |
| 0x00, /* Interface index */ |
| 0x00, /* Alternate setting */ |
| 2, /* Number of Endpoints */ |
| MASS_STORAGE_CLASS, /* Class */ |
| SCSI_TRANSPARENT_SUBCLASS, /* SubClass */ |
| BULK_ONLY_PROTOCOL, /* Protocol */ |
| /* Index of the Interface String Descriptor */ |
| 0x00, |
| |
| /* First Endpoint IN */ |
| USB_ENDPOINT_DESC_SIZE, /* Descriptor size */ |
| USB_ENDPOINT_DESC, /* Descriptor type */ |
| EPBULK_IN, /* Endpoint address */ |
| USB_DC_EP_BULK, /* Attributes */ |
| LOW_BYTE(MASS_STORAGE_BULK_EP_MPS), |
| HIGH_BYTE(MASS_STORAGE_BULK_EP_MPS), /* Max packet size */ |
| 0x00, /* Interval */ |
| |
| /* Second Endpoint OUT */ |
| USB_ENDPOINT_DESC_SIZE, /* Descriptor size */ |
| USB_ENDPOINT_DESC, /* Descriptor type */ |
| EPBULK_OUT, /* Endpoint address */ |
| USB_DC_EP_BULK, /* Attributes */ |
| LOW_BYTE(MASS_STORAGE_BULK_EP_MPS), |
| HIGH_BYTE(MASS_STORAGE_BULK_EP_MPS), /* Max packet size */ |
| 0x00, /* Interval */ |
| |
| /* String descriptor language, only one, so min size 4 bytes. |
| * 0x0409 English(US) language code used |
| */ |
| USB_STRING_DESC_SIZE, /* Descriptor size */ |
| USB_STRING_DESC, /* Descriptor type */ |
| 0x09, |
| 0x04, |
| |
| /* Manufacturer String Descriptor "ZEPHYR" */ |
| 0x0E, |
| USB_STRING_DESC, |
| 'Z', 0, 'E', 0, 'P', 0, 'H', 0, 'Y', 0, 'R', 0, |
| |
| /* Product String Descriptor "USB-DISK" */ |
| 0x12, |
| USB_STRING_DESC, |
| 'U', 0, 'S', 0, 'B', 0, '-', 0, 'D', 0, 'I', 0, 'S', 0, 'K', 0, |
| |
| /* Serial Number String Descriptor "0.01" */ |
| 0x0A, |
| USB_STRING_DESC, |
| '0', 0, '.', 0, '0', 0, '1', 0, |
| }; |
| |
| static void msd_state_machine_reset(void) |
| { |
| stage = READ_CBW; |
| } |
| |
| static void msd_init(void) |
| { |
| memset((void *)&cbw, 0, sizeof(struct CBW)); |
| memset((void *)&csw, 0, sizeof(struct CSW)); |
| memset(page, 0, sizeof(page)); |
| addr = 0; |
| length = 0; |
| } |
| |
| static void sendCSW(void) |
| { |
| csw.Signature = CSW_Signature; |
| if (usb_write(EPBULK_IN, (u8_t *)&csw, |
| sizeof(struct CSW), NULL) != 0) { |
| SYS_LOG_ERR("usb write failure"); |
| } |
| stage = WAIT_CSW; |
| } |
| |
| static bool write(u8_t *buf, u16_t size) |
| { |
| if (size >= cbw.DataLength) { |
| size = cbw.DataLength; |
| } |
| |
| /* updating the State Machine , so that we send CSW when this |
| * transfer is complete, ie when we get a bulk in callback |
| */ |
| stage = SEND_CSW; |
| |
| if (!usb_write(EPBULK_IN, buf, size, NULL)) { |
| return false; |
| } |
| |
| csw.DataResidue -= size; |
| csw.Status = CSW_PASSED; |
| return true; |
| } |
| |
| /** |
| * @brief Handler called for Class requests not handled by the USB stack. |
| * |
| * @param pSetup Information about the request to execute. |
| * @param len Size of the buffer. |
| * @param data Buffer containing the request result. |
| * |
| * @return 0 on success, negative errno code on fail. |
| */ |
| static int mass_storage_class_handle_req(struct usb_setup_packet *pSetup, |
| s32_t *len, u8_t **data) |
| { |
| |
| switch (pSetup->bRequest) { |
| case MSC_REQUEST_RESET: |
| SYS_LOG_DBG("\nMSC_REQUEST_RESET"); |
| msd_state_machine_reset(); |
| break; |
| |
| case MSC_REQUEST_GET_MAX_LUN: |
| SYS_LOG_DBG("\nMSC_REQUEST_GET_MAX_LUN "); |
| max_lun_count = 0; |
| *data = (u8_t *)(&max_lun_count); |
| *len = 1; |
| break; |
| |
| default: |
| SYS_LOG_DBG("Mass Storage unknown request 0x%x, value 0x%x", |
| pSetup->bRequest, pSetup->wValue); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void testUnitReady(void) |
| { |
| if (cbw.DataLength != 0) { |
| if ((cbw.Flags & 0x80) != 0) { |
| SYS_LOG_DBG("TUR - BI - STALL"); |
| usb_ep_set_stall(EPBULK_IN); |
| } else { |
| SYS_LOG_DBG("TUR - BO - STALL"); |
| usb_ep_set_stall(EPBULK_OUT); |
| } |
| } |
| |
| csw.Status = CSW_PASSED; |
| sendCSW(); |
| } |
| |
| static bool requestSense(void) |
| { |
| u8_t request_sense[] = { |
| 0x70, |
| 0x00, |
| 0x05, /* Sense Key: illegal request */ |
| 0x00, |
| 0x00, |
| 0x00, |
| 0x00, |
| 0x0A, |
| 0x00, |
| 0x00, |
| 0x00, |
| 0x00, |
| 0x30, |
| 0x01, |
| 0x00, |
| 0x00, |
| 0x00, |
| 0x00, |
| }; |
| |
| if (!write(request_sense, sizeof(request_sense))) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool inquiryRequest(void) |
| { |
| u8_t inquiry[] = { 0x00, 0x80, 0x00, 0x01, |
| 36 - 4, 0x80, 0x00, 0x00, |
| 'Z', 'E', 'P', 'H', 'Y', 'R', ' ', ' ', |
| 'Z', 'E', 'P', 'H', 'Y', 'R', ' ', 'U', 'S', 'B', ' ', 'D', 'I', 'S', 'K', ' ', |
| '0', '.', '0', '1', |
| }; |
| |
| if (!write(inquiry, sizeof(inquiry))) { |
| return false; |
| } |
| return true; |
| } |
| |
| static bool modeSense6(void) |
| { |
| u8_t sense6[] = { 0x03, 0x00, 0x00, 0x00 }; |
| |
| if (!write(sense6, sizeof(sense6))) { |
| return false; |
| } |
| return true; |
| } |
| |
| static bool readFormatCapacity(void) |
| { |
| u8_t capacity[] = { 0x00, 0x00, 0x00, 0x08, |
| (u8_t)((block_count >> 24) & 0xff), |
| (u8_t)((block_count >> 16) & 0xff), |
| (u8_t)((block_count >> 8) & 0xff), |
| (u8_t)((block_count >> 0) & 0xff), |
| |
| 0x02, |
| (u8_t)((BLOCK_SIZE >> 16) & 0xff), |
| (u8_t)((BLOCK_SIZE >> 8) & 0xff), |
| (u8_t)((BLOCK_SIZE >> 0) & 0xff), |
| }; |
| if (!write(capacity, sizeof(capacity))) { |
| return false; |
| } |
| return true; |
| } |
| |
| static bool readCapacity(void) |
| { |
| u8_t capacity[] = { |
| (u8_t)(((block_count - 1) >> 24) & 0xff), |
| (u8_t)(((block_count - 1) >> 16) & 0xff), |
| (u8_t)(((block_count - 1) >> 8) & 0xff), |
| (u8_t)(((block_count - 1) >> 0) & 0xff), |
| |
| (u8_t)((BLOCK_SIZE >> 24) & 0xff), |
| (u8_t)((BLOCK_SIZE >> 16) & 0xff), |
| (u8_t)((BLOCK_SIZE >> 8) & 0xff), |
| (u8_t)((BLOCK_SIZE >> 0) & 0xff), |
| }; |
| if (!write(capacity, sizeof(capacity))) { |
| return false; |
| } |
| return true; |
| } |
| |
| static void thread_memory_read_done(void) |
| { |
| u32_t n; |
| |
| n = (length > MAX_PACKET) ? MAX_PACKET : length; |
| if ((addr + n) > memory_size) { |
| n = memory_size - addr; |
| stage = ERROR; |
| } |
| |
| if (usb_write(EPBULK_IN, &page[addr % BLOCK_SIZE], n, NULL) != 0) { |
| SYS_LOG_ERR("usb write failure"); |
| } |
| addr += n; |
| length -= n; |
| |
| csw.DataResidue -= n; |
| |
| if (!length || (stage != PROCESS_CBW)) { |
| csw.Status = (stage == PROCESS_CBW) ? CSW_PASSED : CSW_FAILED; |
| stage = (stage == PROCESS_CBW) ? SEND_CSW : stage; |
| } |
| } |
| |
| |
| static void memoryRead(void) |
| { |
| u32_t n; |
| |
| n = (length > MAX_PACKET) ? MAX_PACKET : length; |
| if ((addr + n) > memory_size) { |
| n = memory_size - addr; |
| stage = ERROR; |
| } |
| |
| /* we read an entire block */ |
| if (!(addr % BLOCK_SIZE)) { |
| thread_op = THREAD_OP_READ_QUEUED; |
| SYS_LOG_DBG("Signal thread for %d", (addr/BLOCK_SIZE)); |
| k_sem_give(&disk_wait_sem); |
| return; |
| } |
| usb_write(EPBULK_IN, &page[addr % BLOCK_SIZE], n, NULL); |
| addr += n; |
| length -= n; |
| |
| csw.DataResidue -= n; |
| |
| if (!length || (stage != PROCESS_CBW)) { |
| csw.Status = (stage == PROCESS_CBW) ? CSW_PASSED : CSW_FAILED; |
| stage = (stage == PROCESS_CBW) ? SEND_CSW : stage; |
| } |
| } |
| |
| static bool infoTransfer(void) |
| { |
| u32_t n; |
| |
| /* Logical Block Address of First Block */ |
| n = (cbw.CB[2] << 24) | (cbw.CB[3] << 16) | (cbw.CB[4] << 8) | |
| (cbw.CB[5] << 0); |
| |
| SYS_LOG_DBG("LBA (block) : 0x%x ", n); |
| addr = n * BLOCK_SIZE; |
| |
| /* Number of Blocks to transfer */ |
| switch (cbw.CB[0]) { |
| case READ10: |
| case WRITE10: |
| case VERIFY10: |
| n = (cbw.CB[7] << 8) | (cbw.CB[8] << 0); |
| break; |
| |
| case READ12: |
| case WRITE12: |
| n = (cbw.CB[6] << 24) | (cbw.CB[7] << 16) | |
| (cbw.CB[8] << 8) | (cbw.CB[9] << 0); |
| break; |
| } |
| |
| SYS_LOG_DBG("Size (block) : 0x%x ", n); |
| length = n * BLOCK_SIZE; |
| |
| if (!cbw.DataLength) { /* host requests no data*/ |
| SYS_LOG_WRN("Zero length in CBW"); |
| csw.Status = CSW_FAILED; |
| sendCSW(); |
| return false; |
| } |
| |
| if (cbw.DataLength != length) { |
| if ((cbw.Flags & 0x80) != 0) { |
| SYS_LOG_WRN("BI - STall, length != "); |
| usb_ep_set_stall(EPBULK_IN); |
| } else { |
| SYS_LOG_WRN("BO - STall"); |
| usb_ep_set_stall(EPBULK_OUT); |
| } |
| |
| csw.Status = CSW_FAILED; |
| sendCSW(); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void fail(void) |
| { |
| SYS_LOG_DBG("fail ()"); |
| csw.Status = CSW_FAILED; |
| sendCSW(); |
| } |
| |
| static void CBWDecode(u8_t *buf, u16_t size) |
| { |
| if (size != sizeof(cbw)) { |
| SYS_LOG_ERR("size != sizeof(cbw)"); |
| return; |
| } |
| |
| memcpy((u8_t *)&cbw, buf, size); |
| if (cbw.Signature != CBW_Signature) { |
| SYS_LOG_ERR("CBW Signature Mismatch"); |
| return; |
| } |
| |
| csw.Tag = cbw.Tag; |
| csw.DataResidue = cbw.DataLength; |
| |
| if ((cbw.CBLength < 1) || (cbw.CBLength > 16) || (cbw.LUN != 0)) { |
| SYS_LOG_WRN("cbw.CBLength %d", cbw.CBLength); |
| fail(); |
| } else { |
| switch (cbw.CB[0]) { |
| case TEST_UNIT_READY: |
| SYS_LOG_DBG(">> TUR"); |
| testUnitReady(); |
| break; |
| case REQUEST_SENSE: |
| SYS_LOG_DBG(">> REQ_SENSE"); |
| requestSense(); |
| break; |
| case INQUIRY: |
| SYS_LOG_DBG(">> INQ"); |
| inquiryRequest(); |
| break; |
| case MODE_SENSE6: |
| SYS_LOG_DBG(">> MODE_SENSE6"); |
| modeSense6(); |
| break; |
| case READ_FORMAT_CAPACITIES: |
| SYS_LOG_DBG(">> READ_FORMAT_CAPACITY"); |
| readFormatCapacity(); |
| break; |
| case READ_CAPACITY: |
| SYS_LOG_DBG(">> READ_CAPACITY"); |
| readCapacity(); |
| break; |
| case READ10: |
| case READ12: |
| SYS_LOG_DBG(">> READ"); |
| if (infoTransfer()) { |
| if ((cbw.Flags & 0x80)) { |
| stage = PROCESS_CBW; |
| memoryRead(); |
| } else { |
| usb_ep_set_stall(EPBULK_OUT); |
| SYS_LOG_DBG("BO-STALL"); |
| csw.Status = CSW_ERROR; |
| sendCSW(); |
| } |
| } |
| break; |
| case WRITE10: |
| case WRITE12: |
| SYS_LOG_DBG(">> WRITE"); |
| if (infoTransfer()) { |
| if (!(cbw.Flags & 0x80)) { |
| stage = PROCESS_CBW; |
| } else { |
| usb_ep_set_stall(EPBULK_IN); |
| SYS_LOG_DBG("BI-STALL"); |
| csw.Status = CSW_ERROR; |
| sendCSW(); |
| } |
| } |
| break; |
| case VERIFY10: |
| SYS_LOG_DBG(">> VERIFY10"); |
| if (!(cbw.CB[1] & 0x02)) { |
| csw.Status = CSW_PASSED; |
| sendCSW(); |
| break; |
| } |
| if (infoTransfer()) { |
| if (!(cbw.Flags & 0x80)) { |
| stage = PROCESS_CBW; |
| memOK = true; |
| } else { |
| usb_ep_set_stall(EPBULK_IN); |
| SYS_LOG_DBG("VERIFY10 - BI - STALL"); |
| csw.Status = CSW_ERROR; |
| sendCSW(); |
| } |
| } |
| break; |
| case MEDIA_REMOVAL: |
| SYS_LOG_DBG(">> MEDIA_REMOVAL"); |
| csw.Status = CSW_PASSED; |
| sendCSW(); |
| break; |
| default: |
| SYS_LOG_WRN(">> default CB[0] %x", cbw.CB[0]); |
| fail(); |
| break; |
| } /*switch(cbw.CB[0])*/ |
| } /* else */ |
| |
| } |
| |
| static void memoryVerify(u8_t *buf, u16_t size) |
| { |
| u32_t n; |
| |
| if ((addr + size) > memory_size) { |
| size = memory_size - addr; |
| stage = ERROR; |
| usb_ep_set_stall(EPBULK_OUT); |
| SYS_LOG_WRN("BO - STall > MemSz"); |
| } |
| |
| /* beginning of a new block -> load a whole block in RAM */ |
| if (!(addr % BLOCK_SIZE)) { |
| SYS_LOG_DBG("Disk READ sector %d", addr/BLOCK_SIZE); |
| if (disk_access_read(page, addr/BLOCK_SIZE, 1)) { |
| SYS_LOG_ERR("---- Disk Read Error %d", addr/BLOCK_SIZE); |
| } |
| } |
| |
| /* info are in RAM -> no need to re-read memory */ |
| for (n = 0; n < size; n++) { |
| if (page[addr%BLOCK_SIZE + n] != buf[n]) { |
| SYS_LOG_DBG("Mismatch sector %d offset %d", |
| addr/BLOCK_SIZE, n); |
| memOK = false; |
| break; |
| } |
| } |
| |
| addr += size; |
| length -= size; |
| csw.DataResidue -= size; |
| |
| if (!length || (stage != PROCESS_CBW)) { |
| csw.Status = (memOK && (stage == PROCESS_CBW)) ? |
| CSW_PASSED : CSW_FAILED; |
| sendCSW(); |
| } |
| } |
| |
| static void memoryWrite(u8_t *buf, u16_t size) |
| { |
| if ((addr + size) > memory_size) { |
| size = memory_size - addr; |
| stage = ERROR; |
| usb_ep_set_stall(EPBULK_OUT); |
| SYS_LOG_WRN("BO - STall > MemSz"); |
| } |
| |
| /* we fill an array in RAM of 1 block before writing it in memory */ |
| for (int i = 0; i < size; i++) { |
| page[addr % BLOCK_SIZE + i] = buf[i]; |
| } |
| |
| /* if the array is filled, write it in memory */ |
| if (!((addr + size) % BLOCK_SIZE)) { |
| if (!(disk_access_status() & DISK_STATUS_WR_PROTECT)) { |
| SYS_LOG_DBG("Disk WRITE Qd %d", (addr/BLOCK_SIZE)); |
| thread_op = THREAD_OP_WRITE_QUEUED; /* write_queued */ |
| defered_wr_sz = size; |
| k_sem_give(&disk_wait_sem); |
| return; |
| } |
| } |
| |
| addr += size; |
| length -= size; |
| csw.DataResidue -= size; |
| |
| if ((!length) || (stage != PROCESS_CBW)) { |
| csw.Status = (stage == ERROR) ? CSW_FAILED : CSW_PASSED; |
| sendCSW(); |
| } |
| } |
| |
| |
| static void mass_storage_bulk_out(u8_t ep, |
| enum usb_dc_ep_cb_status_code ep_status) |
| { |
| u32_t bytes_read = 0; |
| u8_t bo_buf[MASS_STORAGE_BULK_EP_MPS]; |
| |
| ARG_UNUSED(ep_status); |
| |
| usb_ep_read_wait(ep, bo_buf, MASS_STORAGE_BULK_EP_MPS, &bytes_read); |
| |
| switch (stage) { |
| /*the device has to decode the CBW received*/ |
| case READ_CBW: |
| SYS_LOG_DBG("> BO - READ_CBW"); |
| CBWDecode(bo_buf, bytes_read); |
| break; |
| |
| /*the device has to receive data from the host*/ |
| case PROCESS_CBW: |
| switch (cbw.CB[0]) { |
| case WRITE10: |
| case WRITE12: |
| /* SYS_LOG_DBG("> BO - PROC_CBW WR");*/ |
| memoryWrite(bo_buf, bytes_read); |
| break; |
| case VERIFY10: |
| SYS_LOG_DBG("> BO - PROC_CBW VER"); |
| memoryVerify(bo_buf, bytes_read); |
| break; |
| default: |
| SYS_LOG_DBG("> BO - PROC_CBW default" |
| "<<ERROR!!!>>"); |
| break; |
| } |
| break; |
| |
| /*an error has occurred: stall endpoint and send CSW*/ |
| default: |
| SYS_LOG_DBG("> BO - default stalling %d", stage); |
| usb_ep_set_stall(ep); |
| csw.Status = CSW_ERROR; |
| sendCSW(); |
| break; |
| } |
| |
| if (thread_op != THREAD_OP_WRITE_QUEUED) { |
| usb_ep_read_continue(ep); |
| } else { |
| SYS_LOG_DBG("> BO not clearing NAKs yet"); |
| } |
| |
| } |
| |
| static void thread_memory_write_done(void) |
| { |
| u32_t size = defered_wr_sz; |
| |
| addr += size; |
| length -= size; |
| csw.DataResidue -= size; |
| |
| |
| if ((!length) || (stage != PROCESS_CBW)) { |
| csw.Status = (stage == ERROR) ? CSW_FAILED : CSW_PASSED; |
| sendCSW(); |
| } |
| |
| thread_op = THREAD_OP_WRITE_DONE; |
| |
| usb_ep_read_continue(EPBULK_OUT); |
| } |
| |
| /** |
| * @brief EP Bulk IN handler, used to send data to the Host |
| * |
| * @param ep Endpoint address. |
| * @param ep_status Endpoint status code. |
| * |
| * @return N/A. |
| */ |
| static void mass_storage_bulk_in(u8_t ep, |
| enum usb_dc_ep_cb_status_code ep_status) |
| { |
| ARG_UNUSED(ep_status); |
| ARG_UNUSED(ep); |
| |
| switch (stage) { |
| /*the device has to send data to the host*/ |
| case PROCESS_CBW: |
| switch (cbw.CB[0]) { |
| case READ10: |
| case READ12: |
| /* SYS_LOG_DBG("< BI - PROC_CBW READ"); */ |
| memoryRead(); |
| break; |
| default: |
| SYS_LOG_ERR("< BI-PROC_CBW default <<ERROR!!>>"); |
| break; |
| } |
| break; |
| |
| /*the device has to send a CSW*/ |
| case SEND_CSW: |
| SYS_LOG_DBG("< BI - SEND_CSW"); |
| sendCSW(); |
| break; |
| |
| /*the host has received the CSW -> we wait a CBW*/ |
| case WAIT_CSW: |
| SYS_LOG_DBG("< BI - WAIT_CSW"); |
| stage = READ_CBW; |
| break; |
| |
| /*an error has occurred*/ |
| default: |
| SYS_LOG_DBG("< BI - default stalling %d", stage); |
| usb_ep_set_stall(EPBULK_IN); |
| sendCSW(); |
| break; |
| } |
| } |
| |
| |
| |
| /** |
| * @brief Callback used to know the USB connection status |
| * |
| * @param status USB device status code. |
| * |
| * @return N/A. |
| */ |
| static void mass_storage_status_cb(enum usb_dc_status_code status) |
| { |
| |
| /* Check the USB status and do needed action if required */ |
| switch (status) { |
| case USB_DC_ERROR: |
| SYS_LOG_DBG("USB device error"); |
| break; |
| case USB_DC_RESET: |
| SYS_LOG_DBG("USB device reset detected 4"); |
| msd_state_machine_reset(); |
| msd_init(); |
| break; |
| case USB_DC_CONNECTED: |
| SYS_LOG_DBG("USB device connected"); |
| break; |
| case USB_DC_CONFIGURED: |
| SYS_LOG_DBG("USB device configured"); |
| break; |
| case USB_DC_DISCONNECTED: |
| SYS_LOG_DBG("USB device disconnected"); |
| break; |
| case USB_DC_SUSPEND: |
| SYS_LOG_DBG("USB device supended"); |
| break; |
| case USB_DC_RESUME: |
| SYS_LOG_DBG("USB device resumed"); |
| break; |
| case USB_DC_UNKNOWN: |
| default: |
| SYS_LOG_DBG("USB unknown state"); |
| break; |
| } |
| } |
| |
| /* Describe EndPoints configuration */ |
| static struct usb_ep_cfg_data mass_ep_data[] = { |
| { |
| .ep_cb = mass_storage_bulk_out, |
| .ep_addr = EPBULK_OUT |
| }, |
| { |
| .ep_cb = mass_storage_bulk_in, |
| .ep_addr = EPBULK_IN |
| } |
| }; |
| |
| /* Configuration of the CDC-ACM Device send to the USB Driver */ |
| static struct usb_cfg_data mass_storage_config = { |
| .usb_device_description = mass_usb_description, |
| .cb_usb_status = mass_storage_status_cb, |
| .interface = { |
| .class_handler = mass_storage_class_handle_req, |
| .custom_handler = NULL, |
| .payload_data = NULL, |
| }, |
| .num_endpoints = 2, |
| .endpoint = mass_ep_data |
| }; |
| |
| static void mass_thread_main(int arg1, int unused) |
| { |
| ARG_UNUSED(unused); |
| ARG_UNUSED(arg1); |
| |
| while (1) { |
| k_sem_take(&disk_wait_sem, K_FOREVER); |
| SYS_LOG_DBG("sem %d", thread_op); |
| |
| switch (thread_op) { |
| case THREAD_OP_READ_QUEUED: |
| if (disk_access_read(page, (addr/BLOCK_SIZE), 1)) { |
| SYS_LOG_ERR("!! Disk Read Error %d !", |
| addr/BLOCK_SIZE); |
| } |
| |
| thread_memory_read_done(); |
| break; |
| case THREAD_OP_WRITE_QUEUED: |
| if (disk_access_write(page, (addr/BLOCK_SIZE), 1)) { |
| SYS_LOG_ERR("!!!!! Disk Write Error %d !!!!!", |
| addr/BLOCK_SIZE); |
| } |
| thread_memory_write_done(); |
| break; |
| default: |
| SYS_LOG_ERR("XXXXXX thread_op %d ! XXXXX", thread_op); |
| } |
| } |
| } |
| |
| static u8_t interface_data[64]; |
| /** |
| * @brief Initialize USB mass storage setup |
| * |
| * This routine is called to reset the USB device controller chip to a |
| * quiescent state. Also it initializes the backing storage and initializes |
| * the mass storage protocol state. |
| * |
| * @param dev device struct. |
| * |
| * @return negative errno code on fatal failure, 0 otherwise |
| */ |
| static int mass_storage_init(struct device *dev) |
| { |
| int ret; |
| u32_t block_size = 0; |
| |
| ARG_UNUSED(dev); |
| |
| if (disk_access_init() != 0) { |
| SYS_LOG_ERR("Storage init ERROR !!!! - Aborting USB init"); |
| return 0; |
| } |
| |
| if (disk_access_ioctl(DISK_IOCTL_GET_SECTOR_COUNT, &block_count)) { |
| SYS_LOG_ERR("Unable to get sector count - Aborting USB init"); |
| return 0; |
| } |
| |
| if (disk_access_ioctl(DISK_IOCTL_GET_SECTOR_SIZE, &block_size)) { |
| SYS_LOG_ERR("Unable to get sector size - Aborting USB init"); |
| return 0; |
| } |
| |
| if (block_size != BLOCK_SIZE) { |
| SYS_LOG_ERR("Block Size reported by the storage side is " |
| "different from Mass Storgae Class page Buffer - Aborting"); |
| return 0; |
| } |
| |
| |
| SYS_LOG_INF("Sect Count %d", block_count); |
| memory_size = block_count * BLOCK_SIZE; |
| SYS_LOG_INF("Memory Size %d", memory_size); |
| |
| mass_storage_config.interface.payload_data = interface_data; |
| msd_state_machine_reset(); |
| msd_init(); |
| |
| /* Initialize the USB driver with the right configuration */ |
| ret = usb_set_config(&mass_storage_config); |
| if (ret < 0) { |
| SYS_LOG_ERR("Failed to config USB"); |
| return ret; |
| } |
| |
| /* Enable USB driver */ |
| ret = usb_enable(&mass_storage_config); |
| if (ret < 0) { |
| SYS_LOG_ERR("Failed to enable USB"); |
| return ret; |
| } |
| |
| k_sem_init(&disk_wait_sem, 0, 1); |
| |
| /* Start a thread to offload disk ops */ |
| k_thread_spawn(mass_thread_stack, DISK_THREAD_STACK_SZ, |
| (k_thread_entry_t)mass_thread_main, NULL, NULL, NULL, |
| DISK_THREAD_PRIO, 0, 0); |
| |
| return 0; |
| } |
| |
| SYS_INIT(mass_storage_init, APPLICATION, CONFIG_KERNEL_INIT_PRIORITY_DEVICE); |