| # Copyright (c) 2016 Nordic Semiconductor ASA |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config HAS_NORDIC_DRIVERS |
| bool |
| default y if HAS_HW_NRF_RADIO_IEEE802154 |
| |
| menu "Nordic drivers" |
| depends on HAS_NORDIC_DRIVERS |
| |
| menuconfig NRF_802154_RADIO_DRIVER |
| bool "Enable nRF IEEE 802.15.4 radio driver" |
| depends on HAS_HW_NRF_RADIO_IEEE802154 |
| select DYNAMIC_INTERRUPTS |
| help |
| This option enables nRF IEEE 802.15.4 radio driver in Zephyr. Note, |
| that beside the radio peripheral itself, this drivers occupies several |
| other peripherals. A complete list can be found in the hal_nordic |
| repository, within drivers/nrf_radio_802154/nrf_802154_peripherals.h |
| file. As the nRF IEEE 802.15.4 radio driver defines IRQ configuration |
| abstraction layer API and its Zephyr-specific implementation uses dynamic |
| interrupts, the DYNAMIC_INTERRUPTS switch is selected unconditionally. |
| |
| if NRF_802154_RADIO_DRIVER |
| |
| config NRF_802154_MULTIPROTOCOL_SUPPORT |
| bool |
| help |
| In dynamic multiprotocol applications, access to the radio peripheral |
| must be distributed by an arbiter. To support this arbitration |
| in the driver, this option must be enabled. Otherwise, the driver |
| assumes that access to the radio peripheral is granted indefinitely. |
| |
| choice NRF_802154_CCA_MODE |
| prompt "nRF IEEE 802.15.4 CCA mode" |
| default NRF_802154_CCA_MODE_ED |
| help |
| CCA mode |
| |
| config NRF_802154_CCA_MODE_ED |
| bool "Energy Above Threshold" |
| |
| config NRF_802154_CCA_MODE_CARRIER |
| bool "Carrier Seen" |
| |
| config NRF_802154_CCA_MODE_CARRIER_AND_ED |
| bool "Energy Above Threshold AND Carrier Seen" |
| |
| config NRF_802154_CCA_MODE_CARRIER_OR_ED |
| bool "Energy Above Threshold OR Carrier Seen" |
| |
| endchoice |
| |
| config NRF_802154_CCA_ED_THRESHOLD |
| int "nRF IEEE 802.15.4 CCA Energy Detection threshold" |
| default 45 |
| help |
| If energy detected in a given channel is above the value then the |
| channel is deemed busy. The unit is defined as per 802.15.4-2006 spec. |
| |
| config NRF_802154_CCA_CORR_THRESHOLD |
| int "nRF IEEE 802.15.4 CCA Correlator threshold" |
| default 45 |
| |
| config NRF_802154_CCA_CORR_LIMIT |
| int "nRF IEEE 802.15.4 CCA Correlator limit" |
| default 2 |
| help |
| Limit for occurrences above correlator threshold. When not equal to |
| zero the correlator based signal detect is enabled. |
| |
| endif # NRF_802154_RADIO_DRIVER |
| |
| endmenu |
| |
| config HAS_NRFX |
| bool |
| |
| menu "nrfx drivers" |
| depends on HAS_NRFX |
| |
| config NRFX_ADC |
| bool "Enable ADC driver" |
| depends on HAS_HW_NRF_ADC |
| |
| config NRFX_CLOCK |
| bool "Enable CLOCK driver" |
| depends on HAS_HW_NRF_CLOCK |
| |
| config NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED |
| bool "Enable two stage start sequence of the low frequency clock" |
| depends on NRFX_CLOCK |
| |
| config NRFX_COMP |
| bool "Enable COMP driver" |
| depends on HAS_HW_NRF_COMP |
| |
| config NRFX_DPPI |
| bool "Enable DPPI allocator" |
| depends on HAS_HW_NRF_DPPIC |
| |
| config NRFX_EGU |
| bool "Enable EGU driver" |
| depends on HAS_HW_NRF_EGU0 || HAS_HW_NRF_EGU1 || HAS_HW_NRF_EGU2 || \ |
| HAS_HW_NRF_EGU3 || HAS_HW_NRF_EGU4 || HAS_HW_NRF_EGU5 |
| |
| config NRFX_EGU0 |
| bool "Enable EGU0 instance" |
| depends on HAS_HW_NRF_EGU0 |
| select NRFX_EGU |
| |
| config NRFX_EGU1 |
| bool "Enable EGU1 instance" |
| depends on HAS_HW_NRF_EGU1 |
| select NRFX_EGU |
| |
| config NRFX_EGU2 |
| bool "Enable EGU2 instance" |
| depends on HAS_HW_NRF_EGU2 |
| select NRFX_EGU |
| |
| config NRFX_EGU3 |
| bool "Enable EGU3 instance" |
| depends on HAS_HW_NRF_EGU3 |
| select NRFX_EGU |
| |
| config NRFX_EGU4 |
| bool "Enable EGU4 instance" |
| depends on HAS_HW_NRF_EGU4 |
| select NRFX_EGU |
| |
| config NRFX_EGU5 |
| bool "Enable EGU5 instance" |
| depends on HAS_HW_NRF_EGU5 |
| select NRFX_EGU |
| |
| config NRFX_GPIOTE |
| bool "Enable GPIOTE driver" |
| depends on HAS_HW_NRF_GPIOTE |
| |
| config NRFX_I2S |
| bool "Enable I2S driver" |
| depends on HAS_HW_NRF_I2S |
| |
| config NRFX_IPC |
| bool "Enable IPC driver" |
| depends on HAS_HW_NRF_IPC |
| |
| config NRFX_LPCOMP |
| bool "Enable LPCOMP driver" |
| depends on HAS_HW_NRF_LPCOMP |
| |
| config NRFX_NFCT |
| bool "Enable NFCT driver" |
| depends on HAS_HW_NRF_NFCT |
| select NRFX_TIMER4 if SOC_SERIES_NRF52X |
| select NRFX_TIMER2 if SOC_SERIES_NRF53X |
| |
| config NRFX_NVMC |
| bool "Enable NVMC driver" |
| |
| config NRFX_PDM |
| bool "Enable PDM driver" |
| depends on HAS_HW_NRF_PDM |
| |
| config NRFX_POWER |
| bool "Enable POWER driver" |
| depends on HAS_HW_NRF_POWER |
| # On SoCs featuring the USBREG peripheral, the POWER driver uses |
| # internally the USBREG driver. |
| select NRFX_USBREG if HAS_HW_NRF_USBREG |
| |
| config NRFX_PPI |
| bool "Enable PPI allocator" |
| depends on HAS_HW_NRF_PPI |
| |
| config NRFX_PWM |
| bool "Enable PWM driver" |
| depends on HAS_HW_NRF_PWM0 || HAS_HW_NRF_PWM1 || \ |
| HAS_HW_NRF_PWM2 || HAS_HW_NRF_PWM3 |
| |
| config NRFX_PWM0 |
| bool "Enable PWM0 instance" |
| depends on HAS_HW_NRF_PWM0 |
| select NRFX_PWM |
| |
| config NRFX_PWM1 |
| bool "Enable PWM1 instance" |
| depends on HAS_HW_NRF_PWM1 |
| select NRFX_PWM |
| |
| config NRFX_PWM2 |
| bool "Enable PWM2 instance" |
| depends on HAS_HW_NRF_PWM2 |
| select NRFX_PWM |
| |
| config NRFX_PWM3 |
| bool "Enable PWM3 instance" |
| depends on HAS_HW_NRF_PWM3 |
| select NRFX_PWM |
| |
| config NRFX_QDEC |
| bool "Enable QDEC driver" |
| depends on HAS_HW_NRF_QDEC |
| |
| config NRFX_QSPI |
| bool "Enable QSPI driver" |
| depends on HAS_HW_NRF_QSPI |
| |
| config NRFX_RNG |
| bool "Enable RNG driver" |
| depends on HAS_HW_NRF_RNG |
| |
| config NRFX_RTC |
| bool "Enable RTC driver" |
| depends on HAS_HW_NRF_RTC0 || HAS_HW_NRF_RTC1 || HAS_HW_NRF_RTC2 |
| |
| config NRFX_RTC0 |
| bool "Enable RTC0 instance" |
| depends on HAS_HW_NRF_RTC0 |
| select NRFX_RTC |
| |
| config NRFX_RTC1 |
| bool "Enable RTC1 instance" |
| depends on HAS_HW_NRF_RTC1 |
| select NRFX_RTC |
| |
| config NRFX_RTC2 |
| bool "Enable RTC2 instance" |
| depends on HAS_HW_NRF_RTC2 |
| select NRFX_RTC |
| |
| config NRFX_SAADC |
| bool "Enable SAADC driver" |
| depends on HAS_HW_NRF_SAADC |
| |
| config NRFX_SPI |
| bool "Enable SPI driver" |
| depends on HAS_HW_NRF_SPI0 || HAS_HW_NRF_SPI1 || HAS_HW_NRF_SPI2 |
| |
| config NRFX_SPI0 |
| bool "Enable SPI0 instance" |
| depends on HAS_HW_NRF_SPI0 |
| select NRFX_SPI |
| |
| config NRFX_SPI1 |
| bool "Enable SPI1 instance" |
| depends on HAS_HW_NRF_SPI1 |
| select NRFX_SPI |
| |
| config NRFX_SPI2 |
| bool "Enable SPI2 instance" |
| depends on HAS_HW_NRF_SPI2 |
| select NRFX_SPI |
| |
| config NRFX_SPIM |
| bool "Enable SPIM driver" |
| depends on HAS_HW_NRF_SPIM0 || HAS_HW_NRF_SPIM1 || \ |
| HAS_HW_NRF_SPIM2 || HAS_HW_NRF_SPIM3 || HAS_HW_NRF_SPIM4 |
| |
| config NRFX_SPIM0 |
| bool "Enable SPIM0 instance" |
| depends on HAS_HW_NRF_SPIM0 |
| select NRFX_SPIM |
| |
| config NRFX_SPIM1 |
| bool "Enable SPIM1 instance" |
| depends on HAS_HW_NRF_SPIM1 |
| select NRFX_SPIM |
| |
| config NRFX_SPIM2 |
| bool "Enable SPIM2 instance" |
| depends on HAS_HW_NRF_SPIM2 |
| select NRFX_SPIM |
| |
| config NRFX_SPIM3 |
| bool "Enable SPIM3 instance" |
| depends on HAS_HW_NRF_SPIM3 |
| select NRFX_SPIM |
| |
| config NRFX_SPIM4 |
| bool "Enable SPIM4 instance" |
| depends on HAS_HW_NRF_SPIM4 |
| select NRFX_SPIM |
| |
| config NRFX_SPIS |
| bool "Enable SPIS driver" |
| depends on HAS_HW_NRF_SPIS0 || HAS_HW_NRF_SPIS1 || \ |
| HAS_HW_NRF_SPIS2 || HAS_HW_NRF_SPIS3 |
| |
| config NRFX_SPIS0 |
| bool "Enable SPIS0 instance" |
| depends on HAS_HW_NRF_SPIS0 |
| select NRFX_SPIS |
| |
| config NRFX_SPIS1 |
| bool "Enable SPIS1 instance" |
| depends on HAS_HW_NRF_SPIS1 |
| select NRFX_SPIS |
| |
| config NRFX_SPIS2 |
| bool "Enable SPIS2 instance" |
| depends on HAS_HW_NRF_SPIS2 |
| select NRFX_SPIS |
| |
| config NRFX_SPIS3 |
| bool "Enable SPIS3 instance" |
| depends on HAS_HW_NRF_SPIS3 |
| select NRFX_SPIS |
| |
| config NRFX_SYSTICK |
| bool "Enable SYSTICK driver" |
| depends on CPU_CORTEX_M_HAS_SYSTICK |
| |
| config NRFX_TEMP |
| bool "Enable TEMP driver" |
| depends on HAS_HW_NRF_TEMP |
| |
| config NRFX_TIMER |
| bool "Enable TIMER driver" |
| depends on HAS_HW_NRF_TIMER0 || HAS_HW_NRF_TIMER1 || \ |
| HAS_HW_NRF_TIMER2 || HAS_HW_NRF_TIMER3 || \ |
| HAS_HW_NRF_TIMER4 |
| |
| config NRFX_TIMER0 |
| bool "Enable TIMER0 instance" |
| depends on HAS_HW_NRF_TIMER0 |
| select NRFX_TIMER |
| |
| config NRFX_TIMER1 |
| bool "Enable TIMER1 instance" |
| depends on HAS_HW_NRF_TIMER1 |
| select NRFX_TIMER |
| |
| config NRFX_TIMER2 |
| bool "Enable TIMER2 instance" |
| depends on HAS_HW_NRF_TIMER2 |
| select NRFX_TIMER |
| |
| config NRFX_TIMER3 |
| bool "Enable TIMER3 instance" |
| depends on HAS_HW_NRF_TIMER3 |
| select NRFX_TIMER |
| |
| config NRFX_TIMER4 |
| bool "Enable TIMER4 instance" |
| depends on HAS_HW_NRF_TIMER4 |
| select NRFX_TIMER |
| |
| config NRFX_TWI |
| bool "Enable TWI driver" |
| depends on HAS_HW_NRF_TWI0 || HAS_HW_NRF_TWI1 |
| |
| config NRFX_TWI0 |
| bool "Enable TWI0 instance" |
| depends on HAS_HW_NRF_TWI0 |
| select NRFX_TWI |
| |
| config NRFX_TWI1 |
| bool "Enable TWI1 instance" |
| depends on HAS_HW_NRF_TWI1 |
| select NRFX_TWI |
| |
| config NRFX_TWIM |
| bool "Enable TWIM driver" |
| depends on HAS_HW_NRF_TWIM0 || HAS_HW_NRF_TWIM1 || \ |
| HAS_HW_NRF_TWIM2 || HAS_HW_NRF_TWIM3 |
| |
| config NRFX_TWIM0 |
| bool "Enable TWIM0 instance" |
| depends on HAS_HW_NRF_TWIM0 |
| select NRFX_TWIM |
| |
| config NRFX_TWIM1 |
| bool "Enable TWIM1 instance" |
| depends on HAS_HW_NRF_TWIM1 |
| select NRFX_TWIM |
| |
| config NRFX_TWIM2 |
| bool "Enable TWIM2 instance" |
| depends on HAS_HW_NRF_TWIM2 |
| select NRFX_TWIM |
| |
| config NRFX_TWIM3 |
| bool "Enable TWIM3 instance" |
| depends on HAS_HW_NRF_TWIM3 |
| select NRFX_TWIM |
| |
| config NRFX_TWIS |
| bool "Enable TWIS driver" |
| depends on HAS_HW_NRF_TWIS0 || HAS_HW_NRF_TWIS1 || \ |
| HAS_HW_NRF_TWIS2 || HAS_HW_NRF_TWIS3 |
| |
| config NRFX_TWIS0 |
| bool "Enable TWIS0 instance" |
| depends on HAS_HW_NRF_TWIS0 |
| select NRFX_TWIS |
| |
| config NRFX_TWIS1 |
| bool "Enable TWIS1 instance" |
| depends on HAS_HW_NRF_TWIS1 |
| select NRFX_TWIS |
| |
| config NRFX_TWIS2 |
| bool "Enable TWIS2 instance" |
| depends on HAS_HW_NRF_TWIS2 |
| select NRFX_TWIS |
| |
| config NRFX_TWIS3 |
| bool "Enable TWIS3 instance" |
| depends on HAS_HW_NRF_TWIS3 |
| select NRFX_TWIS |
| |
| config NRFX_UART |
| bool "Enable UART driver" |
| depends on HAS_HW_NRF_UART0 |
| |
| config NRFX_UART0 |
| bool "Enable UART0 instance" |
| depends on HAS_HW_NRF_UART0 |
| select NRFX_UART |
| |
| config NRFX_UARTE |
| bool "Enable UARTE driver" |
| depends on HAS_HW_NRF_UARTE0 || HAS_HW_NRF_UARTE1 || \ |
| HAS_HW_NRF_UARTE2 || HAS_HW_NRF_UARTE3 |
| |
| config NRFX_UARTE0 |
| bool "Enable UARTE0 instance" |
| depends on HAS_HW_NRF_UARTE0 |
| select NRFX_UARTE |
| |
| config NRFX_UARTE1 |
| bool "Enable UARTE1 instance" |
| depends on HAS_HW_NRF_UARTE1 |
| select NRFX_UARTE |
| |
| config NRFX_UARTE2 |
| bool "Enable UARTE2 instance" |
| depends on HAS_HW_NRF_UARTE2 |
| select NRFX_UARTE |
| |
| config NRFX_UARTE3 |
| bool "Enable UARTE3 instance" |
| depends on HAS_HW_NRF_UARTE3 |
| select NRFX_UARTE |
| |
| config NRFX_USBD |
| bool "Enable USBD driver" |
| depends on HAS_HW_NRF_USBD |
| select NRFX_SYSTICK |
| |
| config NRFX_USBREG |
| bool "Enable USBREG driver" |
| depends on HAS_HW_NRF_USBREG |
| |
| config NRFX_WDT |
| bool "Enable WDT driver" |
| depends on HAS_HW_NRF_WDT || HAS_HW_NRF_WDT0 || HAS_HW_NRF_WDT1 |
| |
| config NRFX_WDT0 |
| bool "Enable WDT0 instance" |
| depends on HAS_HW_NRF_WDT || HAS_HW_NRF_WDT0 |
| select NRFX_WDT |
| |
| config NRFX_WDT1 |
| bool "Enable WDT1 instance" |
| depends on HAS_HW_NRF_WDT1 |
| select NRFX_WDT |
| |
| config NRFX_PRS |
| bool "Enable Peripheral Resource Sharing module" |
| |
| config NRFX_PRS_BOX_0 |
| bool "Enable PRS box 0" |
| select NRFX_PRS |
| |
| config NRFX_PRS_BOX_1 |
| bool "Enable PRS box 1" |
| select NRFX_PRS |
| |
| config NRFX_PRS_BOX_2 |
| bool "Enable PRS box 2" |
| select NRFX_PRS |
| |
| config NRFX_PRS_BOX_3 |
| bool "Enable PRS box 3" |
| select NRFX_PRS |
| |
| config NRFX_PRS_BOX_4 |
| bool "Enable PRS box 4" |
| select NRFX_PRS |
| |
| endmenu |
