blob: 6971315b6b89a607611a987b27416511dae5021f [file] [log] [blame]
# HW Info driver configuration options
# Copyright (c) 2019 Alexander Wachter
# SPDX-License-Identifier: Apache-2.0
menuconfig HWINFO
bool "Hardware Information drivers"
help
Enable hwinfo driver.
if HWINFO
module = HWINFO
module-str = HWINFO
source "subsys/logging/Kconfig.template.log_config"
config HWINFO_SHELL
bool "HWINFO Shell"
default y
depends on SHELL
help
Enable hwinfo Shell for testing.
menuconfig HWINFO_CC13XX_CC26XX
bool "TI SimpleLink CC13xx/CC26xx hwinfo driver"
default y
depends on SOC_SERIES_CC13X2_CC26X2 || SOC_SERIES_CC13X2X7_CC26X2X7
help
Enable TI SimpleLink CC13xx/CC26xx hwinfo driver.
if HWINFO_CC13XX_CC26XX
config HWINFO_CC13XX_CC26XX_ALWAYS_USE_FACTORY_DEFAULT
bool "Ignore CCFG and always use factory value"
default y
help
Always return factory pre-programmed values, stored in FCFG and ignore
values provided in CCFG (Customer Configuration).
choice
prompt "Select MAC address type for device ID"
default HWINFO_CC13XX_CC26XX_USE_IEEE_MAC
help
Specify the MAC address type to be used as device ID by the driver.
config HWINFO_CC13XX_CC26XX_USE_IEEE_MAC
bool "Use IEEE 802.15.4 extended address"
help
Use 8-bytes length IEEE 802.15.4 extended address as device ID value.
config HWINFO_CC13XX_CC26XX_USE_BLE_MAC
bool "Use BLE MAC address"
help
Use 6-bytes length BLE MAC address as device ID value.
endchoice
endif
config HWINFO_STM32
bool "STM32 hwinfo"
default y
depends on SOC_FAMILY_STM32
help
Enable STM32 hwinfo driver.
config HWINFO_NRF
bool "NRF device ID"
default y
depends on SOC_FAMILY_NRF
depends on NRF_SOC_SECURE_SUPPORTED
help
Enable Nordic NRF hwinfo driver.
config HWINFO_MCUX_RCM
bool "NXP kinetis reset cause"
default y
depends on HAS_MCUX_RCM
help
Enable NXP kinetis mcux RCM hwinfo driver.
config HWINFO_MCUX_SIM
bool "NXP kinetis SIM device ID"
default y
depends on HAS_MCUX_SIM
help
Enable NXP kinetis mcux SIM hwinfo driver.
config HWINFO_MCUX_SRC
bool "NXP SRC reset cause"
default y
depends on HAS_MCUX_SRC
help
Enable NXP i.MX mcux SRC hwinfo driver.
config HWINFO_MCUX_SRC_V2
bool "NXP SRC reset cause (multicore devices)"
default y
depends on HAS_MCUX_SRC_V2
help
Enable version 2 multicore NXP i.MX mcux SRC hwinfo driver.
config HWINFO_MCUX_SYSCON
bool "NXP LPC device ID"
default y
depends on DT_HAS_NXP_LPC_UID_ENABLED
help
Enable NXP LPC mcux hwinfo driver.
config HWINFO_IMXRT
bool "NXP i.mx RT device ID"
default y
depends on SOC_SERIES_IMX_RT
help
Enable NXP i.mx RT hwinfo driver.
config HWINFO_RPI_PICO
bool "Raspberry Pi Pico hwinfo driver"
default y
depends on SOC_SERIES_RP2XXX
select PICOSDK_USE_FLASH
help
Enable Raspberry Pi Pico hwinfo driver.
config HWINFO_SAM_RSTC
bool "Atmel SAM reset cause"
default y
depends on SOC_FAMILY_SAM && !SOC_SERIES_SAM4L
help
Enable Atmel SAM reset cause hwinfo driver.
config HWINFO_SAM
bool "Atmel SAM device ID"
default y
depends on SOC_FAMILY_SAM && !SOC_SERIES_SAM4L
help
Enable Atmel SAM device ID hwinfo driver.
config HWINFO_SAM4L
bool "Atmel SAM4L device ID"
default y
depends on SOC_SERIES_SAM4L
help
Enable Atmel SAM4L hwinfo driver.
config HWINFO_SAM0
bool "Atmel SAM0 device ID"
default y
depends on SOC_FAMILY_SAM0
help
Enable Atmel SAM0 hwinfo driver.
config HWINFO_ESP32
bool "ESP32 device ID"
default y
depends on SOC_FAMILY_ESP32
help
Enable ESP32 hwinfo driver.
config HWINFO_LITEX
bool "LiteX device ID"
default y
depends on SOC_RISCV32_LITEX_VEXRISCV
help
Enable LiteX hwinfo driver
config HWINFO_PSOC6
bool "Cypress PSoC-6 unique device ID"
default y
depends on SOC_FAMILY_PSOC6
help
Enable Cypress PSoC-6 hwinfo driver.
config HWINFO_GECKO
bool "GECKO hwinfo"
default y
depends on SOC_FAMILY_EXX32 && !SOC_SERIES_EFR32MG21 && !SOC_SERIES_EFR32BG22
select SOC_GECKO_RMU
help
Enable Silabs GECKO hwinfo driver.
config HWINFO_ANDES
bool "Andes system ID"
default y
depends on SOC_SERIES_RISCV_ANDES_V5
help
Enable Andes hwinfo driver
endif