blob: 5572f84290b592264d0a0f5ab727719bc7b4d56d [file] [log] [blame]
# Copyright (c) 2018, Jan Van Winkel <jan.van_winkel@dxplore.eu>
# Copyright (c) 2020, Teslabs Engineering S.L.
# Copyright (c) 2021, Krivorot Oleg <krivorot.oleg@gmail.com>
# Copyright (c) 2022, Konstantinos Papadopulos <kostas.papadopulos@gmail.com>
# SPDX-License-Identifier: Apache-2.0
description: ILI9341 320x240 display controller
compatible: "ilitek,ili9341"
include: ilitek,ili9xxx-common.yaml
properties:
ifmode:
type: uint8-array
default: [0x40]
description:
RGB interface signal control (IFMOD) register value.
ifctl:
type: uint8-array
default: [0x01, 0x00, 0x00]
description:
Interface control (IFCTL) register value.
pwctrla:
type: uint8-array
default: [0x39, 0x2c, 0x00, 0x34, 0x02]
description:
Power control A (PWCTRLA) register value.
pwctrlb:
type: uint8-array
default: [0x00, 0x8b, 0x30]
description:
Power control B (PWCTRLB) register value.
pwseqctrl:
type: uint8-array
default: [0x55, 0x01, 0x23, 0x01]
description:
Power on sequence control (PWSEQCTRL) register value.
timctrla:
type: uint8-array
default: [0x84, 0x11, 0x7a]
description:
Driver timing control A (TIMCTRLA) register value.
timctrlb:
type: uint8-array
default: [0x00, 0x00]
description:
Driver timing control B (TIMCTRLB) register value.
pumpratioctrl:
type: uint8-array
default: [0x10]
description:
Pump ratio control (PUMPRATIOCTRL) register value.
enable3g:
type: uint8-array
default: [0x02]
description:
Enable 3G (ENABLE3G) register value.
etmod:
type: uint8-array
default: [0x06]
description:
Entry Mode Set (ETMOD) register value.
gamset:
type: uint8-array
default: [0x01]
description:
Gamma set (GAMSET) register value.
frmctr1:
type: uint8-array
default: [0x00, 0x1b]
description:
Frame rate control (in normal mode / full colors) (FRMCTR1) register value.
disctrl:
type: uint8-array
default: [0x0a, 0x82, 0x27, 0x04]
description:
Display function control (DISCTRL) register value. Note that changing
default SS bit value (0) may interfere with display rotation.
pwctrl1:
type: uint8-array
default: [0x21]
description:
Power control 1 (PWCTRL1) register values.
pwctrl2:
type: uint8-array
default: [0x10]
description:
Power control 2 (PWCTRL2) register values.
vmctrl1:
type: uint8-array
default: [0x31, 0x3c]
description:
VCOM control 1 (VMCTRL1) register values.
vmctrl2:
type: uint8-array
default: [0xc0]
description:
VCOM control 2 (VMCTRL2) register values.
pgamctrl:
type: uint8-array
default: [
0x0f,
0x22,
0x1f,
0x0a,
0x0e,
0x06,
0x4d,
0x76,
0x3b,
0x03,
0x0e,
0x04,
0x13,
0x0e,
0x0c
]
description:
Positive gamma correction (PGAMCTRL) register values.
ngamctrl:
type: uint8-array
default: [
0x0c,
0x23,
0x26,
0x04,
0x10,
0x04,
0x39,
0x24,
0x4b,
0x03,
0x0b,
0x0b,
0x33,
0x37,
0x0f
]
description:
Negative gamma correction (NGAMCTRL) register values.