blob: 7b251cf03bdad381e6950bf48f082bcfdc02a403 [file] [log] [blame] [edit]
/*
* Copyright (c) 2022 ITE Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ite_it8xxx2_gpiokscan
#include <errno.h>
#include <zephyr/device.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/gpio/gpio_utils.h>
#include <zephyr/dt-bindings/gpio/ite-it8xxx2-gpio.h>
#include <zephyr/sys/util.h>
#include <zephyr/types.h>
struct gpio_kscan_cfg {
/* The gpio_driver_config needs to be first */
struct gpio_driver_config common;
/* KSI[7:0]/KSO[15:8]/KSO[7:0] port gpio output enable register (bit mapping to pin) */
volatile uint8_t *reg_ksi_kso_goen;
/* KSI[7:0]/KSO[15:8]/KSO[7:0] port gpio control register (bit mapping to pin) */
volatile uint8_t *reg_ksi_kso_gctrl;
/* KSI[7:0]/KSO[15:8]/KSO[7:0] port gpio data register (bit mapping to pin) */
volatile uint8_t *reg_ksi_kso_gdat;
/* KSI[7:0]/KSO[15:8]/KSO[7:0] port gpio data mirror register (bit mapping to pin) */
volatile uint8_t *reg_ksi_kso_gdmr;
/* KSI[7:0]/KSO[15:8]/KSO[7:0] port gpio open drain register (bit mapping to pin) */
volatile uint8_t *reg_ksi_kso_gpod;
};
struct gpio_kscan_data {
/* The gpio_driver_data needs to be first */
struct gpio_driver_data common;
};
static int gpio_kscan_it8xxx2_configure(const struct device *dev,
gpio_pin_t pin,
gpio_flags_t flags)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_gctrl = config->reg_ksi_kso_gctrl;
volatile uint8_t *reg_ksi_kso_goen = config->reg_ksi_kso_goen;
volatile uint8_t *reg_ksi_kso_gdat = config->reg_ksi_kso_gdat;
volatile uint8_t *reg_ksi_kso_gpod = config->reg_ksi_kso_gpod;
uint8_t mask = BIT(pin);
/* KSI[7:0]/KSO[15:8]/KSO[7:0] pins don't support open source, 1.8V and 5.0V mode */
if ((((flags & GPIO_SINGLE_ENDED) != 0) && ((flags & GPIO_LINE_OPEN_DRAIN) == 0)) ||
((flags & IT8XXX2_GPIO_VOLTAGE_MASK) == IT8XXX2_GPIO_VOLTAGE_1P8) ||
((flags & IT8XXX2_GPIO_VOLTAGE_MASK) == IT8XXX2_GPIO_VOLTAGE_5P0)) {
return -ENOTSUP;
}
/* Set GPIO mode */
*reg_ksi_kso_gctrl |= mask;
if (flags & GPIO_OUTPUT) {
/*
* Select open drain first, so that we don't glitch the signal
* when changing the line to an output.
*/
if (flags & GPIO_OPEN_DRAIN) {
/* Set open-drain and enable internal pullup */
*reg_ksi_kso_gpod |= mask;
} else {
/* Set push-pull and disable internal pullup */
*reg_ksi_kso_gpod &= ~mask;
}
/* Set level before change to output */
if (flags & GPIO_OUTPUT_INIT_HIGH) {
*reg_ksi_kso_gdat |= mask;
} else if (flags & GPIO_OUTPUT_INIT_LOW) {
*reg_ksi_kso_gdat &= ~mask;
}
/* Set output mode */
*reg_ksi_kso_goen |= mask;
} else {
/* Set input mode */
*reg_ksi_kso_goen &= ~mask;
if (flags & GPIO_PULL_UP) {
/* Enable internal pullup */
*reg_ksi_kso_gpod |= mask;
} else {
/* No internal pullup and pulldown */
*reg_ksi_kso_gpod &= ~mask;
}
}
return 0;
}
#ifdef CONFIG_GPIO_GET_CONFIG
static int gpio_kscan_it8xxx2_get_config(const struct device *dev,
gpio_pin_t pin,
gpio_flags_t *out_flags)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_goen = config->reg_ksi_kso_goen;
volatile uint8_t *reg_ksi_kso_gdat = config->reg_ksi_kso_gdat;
volatile uint8_t *reg_ksi_kso_gpod = config->reg_ksi_kso_gpod;
uint8_t mask = BIT(pin);
gpio_flags_t flags = 0;
/* KSI[7:0]/KSO[15:8]/KSO[7:0] pins only support 3.3V */
flags |= IT8XXX2_GPIO_VOLTAGE_3P3;
/* Input or output */
if (*reg_ksi_kso_goen & mask) {
flags |= GPIO_OUTPUT;
/* Open-drain or push-pull */
if (*reg_ksi_kso_gpod & mask) {
flags |= GPIO_OPEN_DRAIN;
}
/* High or low */
if (*reg_ksi_kso_gdat & mask) {
flags |= GPIO_OUTPUT_HIGH;
} else {
flags |= GPIO_OUTPUT_LOW;
}
} else {
flags |= GPIO_INPUT;
/* pullup or no pull */
if (*reg_ksi_kso_gpod & mask) {
flags |= GPIO_PULL_UP;
}
}
*out_flags = flags;
return 0;
}
#endif
static int gpio_kscan_it8xxx2_port_get_raw(const struct device *dev,
gpio_port_value_t *value)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_gdmr = config->reg_ksi_kso_gdmr;
/* Get physical level from all pins of the port */
*value = *reg_ksi_kso_gdmr;
return 0;
}
static int gpio_kscan_it8xxx2_port_set_masked_raw(const struct device *dev,
gpio_port_pins_t mask,
gpio_port_value_t value)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_gdat = config->reg_ksi_kso_gdat;
uint8_t out = *reg_ksi_kso_gdat;
/* Set high/low level to mask pins of the port */
*reg_ksi_kso_gdat = ((out & ~mask) | (value & mask));
return 0;
}
static int gpio_kscan_it8xxx2_port_set_bits_raw(const struct device *dev,
gpio_port_pins_t pins)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_gdat = config->reg_ksi_kso_gdat;
/* Set high level to pins of the port */
*reg_ksi_kso_gdat |= pins;
return 0;
}
static int gpio_kscan_it8xxx2_port_clear_bits_raw(const struct device *dev,
gpio_port_pins_t pins)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_gdat = config->reg_ksi_kso_gdat;
/* Set low level to pins of the port */
*reg_ksi_kso_gdat &= ~pins;
return 0;
}
static int gpio_kscan_it8xxx2_port_toggle_bits(const struct device *dev,
gpio_port_pins_t pins)
{
const struct gpio_kscan_cfg *const config = dev->config;
volatile uint8_t *reg_ksi_kso_gdat = config->reg_ksi_kso_gdat;
/* Toggle output level to pins of the port */
*reg_ksi_kso_gdat ^= pins;
return 0;
}
static const struct gpio_driver_api gpio_kscan_it8xxx2_driver_api = {
.pin_configure = gpio_kscan_it8xxx2_configure,
#ifdef CONFIG_GPIO_GET_CONFIG
.pin_get_config = gpio_kscan_it8xxx2_get_config,
#endif
.port_get_raw = gpio_kscan_it8xxx2_port_get_raw,
.port_set_masked_raw = gpio_kscan_it8xxx2_port_set_masked_raw,
.port_set_bits_raw = gpio_kscan_it8xxx2_port_set_bits_raw,
.port_clear_bits_raw = gpio_kscan_it8xxx2_port_clear_bits_raw,
.port_toggle_bits = gpio_kscan_it8xxx2_port_toggle_bits,
};
#define GPIO_KSCAN_IT8XXX2_INIT(inst) \
static const struct gpio_kscan_cfg gpio_kscan_it8xxx2_cfg_##inst = { \
.common = { \
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_NGPIOS( \
DT_INST_PROP(inst, ngpios)) \
}, \
.reg_ksi_kso_goen = (uint8_t *)DT_INST_REG_ADDR_BY_NAME(inst, goen), \
.reg_ksi_kso_gctrl = (uint8_t *)DT_INST_REG_ADDR_BY_NAME(inst, gctrl), \
.reg_ksi_kso_gdat = (uint8_t *)DT_INST_REG_ADDR_BY_NAME(inst, gdat), \
.reg_ksi_kso_gdmr = (uint8_t *)DT_INST_REG_ADDR_BY_NAME(inst, gdmr), \
.reg_ksi_kso_gpod = (uint8_t *)DT_INST_REG_ADDR_BY_NAME(inst, gpod), \
}; \
\
static struct gpio_kscan_data gpio_kscan_it8xxx2_data_##inst; \
\
DEVICE_DT_INST_DEFINE(inst, \
NULL, \
NULL, \
&gpio_kscan_it8xxx2_data_##inst, \
&gpio_kscan_it8xxx2_cfg_##inst, \
PRE_KERNEL_1, \
CONFIG_GPIO_INIT_PRIORITY, \
&gpio_kscan_it8xxx2_driver_api);
DT_INST_FOREACH_STATUS_OKAY(GPIO_KSCAN_IT8XXX2_INIT)