blob: 0796b9a5be40196dfa16e3f40fe0fb7feaa641b5 [file] [log] [blame]
/*
* Copyright (c) 2023 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*/
#define LOG_DOMAIN flash_stm32wba
#define LOG_LEVEL CONFIG_FLASH_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(LOG_DOMAIN);
#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <string.h>
#include <zephyr/drivers/flash.h>
#include <zephyr/init.h>
#include <soc.h>
#include <stm32_ll_icache.h>
#include <stm32_ll_system.h>
#include "flash_stm32.h"
#define STM32_SERIES_MAX_FLASH 1024
#define ICACHE_DISABLE_TIMEOUT_VALUE 1U /* 1ms */
#define ICACHE_INVALIDATE_TIMEOUT_VALUE 1U /* 1ms */
static int stm32_icache_disable(void)
{
int status = 0;
uint32_t tickstart;
LOG_DBG("I-cache Disable");
/* Clear BSYENDF flag first and then disable the instruction cache
* that starts a cache invalidation procedure
*/
CLEAR_BIT(ICACHE->FCR, ICACHE_FCR_CBSYENDF);
LL_ICACHE_Disable();
/* Get tick */
tickstart = k_uptime_get_32();
/* Wait for instruction cache to get disabled */
while (LL_ICACHE_IsEnabled()) {
if ((k_uptime_get_32() - tickstart) >
ICACHE_DISABLE_TIMEOUT_VALUE) {
/* New check to avoid false timeout detection in case
* of preemption.
*/
if (LL_ICACHE_IsEnabled()) {
status = -ETIMEDOUT;
break;
}
}
}
return status;
}
static void stm32_icache_enable(void)
{
LOG_DBG("I-cache Enable");
LL_ICACHE_Enable();
}
static int icache_wait_for_invalidate_complete(void)
{
int status = -EIO;
uint32_t tickstart;
/* Check if ongoing invalidation operation */
if (LL_ICACHE_IsActiveFlag_BUSY()) {
/* Get tick */
tickstart = k_uptime_get_32();
/* Wait for end of cache invalidation */
while (!LL_ICACHE_IsActiveFlag_BSYEND()) {
if ((k_uptime_get_32() - tickstart) >
ICACHE_INVALIDATE_TIMEOUT_VALUE) {
break;
}
}
}
/* Clear any pending flags */
if (LL_ICACHE_IsActiveFlag_BSYEND()) {
LOG_DBG("I-cache Invalidation complete");
LL_ICACHE_ClearFlag_BSYEND();
status = 0;
} else {
LOG_ERR("I-cache Invalidation timeout");
status = -ETIMEDOUT;
}
if (LL_ICACHE_IsActiveFlag_ERR()) {
LOG_ERR("I-cache error");
LL_ICACHE_ClearFlag_ERR();
status = -EIO;
}
return status;
}
static int write_qword(const struct device *dev, off_t offset, const uint32_t *buff)
{
FLASH_TypeDef *regs = FLASH_STM32_REGS(dev);
volatile uint32_t *flash = (uint32_t *)(offset
+ CONFIG_FLASH_BASE_ADDRESS);
uint32_t tmp;
int rc;
/* if the non-secure control register is locked, do not fail silently */
if (regs->NSCR & FLASH_STM32_NSLOCK) {
LOG_ERR("NSCR locked\n");
return -EIO;
}
/* Check that no Flash main memory operation is ongoing */
rc = flash_stm32_wait_flash_idle(dev);
if (rc < 0) {
return rc;
}
/* Check if this double word is erased */
if ((flash[0] != 0xFFFFFFFFUL) || (flash[1] != 0xFFFFFFFFUL) ||
(flash[2] != 0xFFFFFFFFUL) || (flash[3] != 0xFFFFFFFFUL)) {
LOG_ERR("Word at offs %ld not erased", (long)offset);
return -EIO;
}
/* Set the NSPG bit */
regs->NSCR |= FLASH_STM32_NSPG;
/* Flush the register write */
tmp = regs->NSCR;
/* Perform the data write operation at the desired memory address */
flash[0] = buff[0];
flash[1] = buff[1];
flash[2] = buff[2];
flash[3] = buff[3];
/* Wait until the NSBSY bit is cleared */
rc = flash_stm32_wait_flash_idle(dev);
/* Clear the NSPG bit */
regs->NSCR &= (~FLASH_STM32_NSPG);
return rc;
}
static int erase_page(const struct device *dev, unsigned int offset)
{
FLASH_TypeDef *regs = FLASH_STM32_REGS(dev);
uint32_t tmp;
int rc;
int page;
/* if the non-secure control register is locked,do not fail silently */
if (regs->NSCR & FLASH_STM32_NSLOCK) {
LOG_ERR("NSCR locked\n");
return -EIO;
}
/* Check that no Flash memory operation is ongoing */
rc = flash_stm32_wait_flash_idle(dev);
if (rc < 0) {
return rc;
}
page = offset / FLASH_PAGE_SIZE;
LOG_DBG("Erase page %d\n", page);
/* Set the NSPER bit and select the page you wish to erase */
regs->NSCR |= FLASH_STM32_NSPER;
regs->NSCR &= ~FLASH_STM32_NSPNB_MSK;
regs->NSCR |= (page << FLASH_STM32_NSPNB_POS);
/* Set the NSSTRT bit */
regs->NSCR |= FLASH_STM32_NSSTRT;
/* flush the register write */
tmp = regs->NSCR;
/* Wait for the NSBSY bit */
rc = flash_stm32_wait_flash_idle(dev);
regs->NSCR &= ~(FLASH_STM32_NSPER);
return rc;
}
int flash_stm32_block_erase_loop(const struct device *dev,
unsigned int offset,
unsigned int len)
{
unsigned int address = offset;
int rc = 0;
bool icache_enabled = LL_ICACHE_IsEnabled();
if (icache_enabled) {
/* Disable icache, this will start the invalidation procedure.
* All changes(erase/write) to flash memory should happen when
* i-cache is disabled. A write to flash performed without
* disabling i-cache will set ERRF error flag in SR register.
*/
rc = stm32_icache_disable();
if (rc != 0) {
return rc;
}
}
for (; address <= offset + len - 1 ; address += FLASH_PAGE_SIZE) {
rc = erase_page(dev, address);
if (rc < 0) {
break;
}
}
if (icache_enabled) {
/* Since i-cache was disabled, this would start the
* invalidation procedure, so wait for completion.
*/
rc = icache_wait_for_invalidate_complete();
/* I-cache should be enabled only after the
* invalidation is complete.
*/
stm32_icache_enable();
}
return rc;
}
int flash_stm32_write_range(const struct device *dev, unsigned int offset,
const void *data, unsigned int len)
{
int i, rc = 0;
bool icache_enabled = LL_ICACHE_IsEnabled();
if (icache_enabled) {
/* Disable icache, this will start the invalidation procedure.
* All changes(erase/write) to flash memory should happen when
* i-cache is disabled. A write to flash performed without
* disabling i-cache will set ERRF error flag in SR register.
*/
rc = stm32_icache_disable();
if (rc != 0) {
return rc;
}
}
for (i = 0; i < len; i += 16) {
rc = write_qword(dev, offset + i, ((const uint32_t *) data + (i>>2)));
if (rc < 0) {
break;
}
}
if (icache_enabled) {
/* Since i-cache was disabled, this would start the
* invalidation procedure, so wait for completion.
*/
rc = icache_wait_for_invalidate_complete();
/* I-cache should be enabled only after the
* invalidation is complete.
*/
stm32_icache_enable();
}
return rc;
}
void flash_stm32_page_layout(const struct device *dev,
const struct flash_pages_layout **layout,
size_t *layout_size)
{
static struct flash_pages_layout stm32wba_flash_layout = {
.pages_count = 0,
.pages_size = 0,
};
ARG_UNUSED(dev);
if (stm32wba_flash_layout.pages_count == 0) {
stm32wba_flash_layout.pages_count = FLASH_SIZE / FLASH_PAGE_SIZE;
stm32wba_flash_layout.pages_size = FLASH_PAGE_SIZE;
}
*layout = &stm32wba_flash_layout;
*layout_size = 1;
}