blob: d692024b096dc44e6443e6f8eaf45a2b18e69376 [file] [log] [blame]
# IEEE 802.15.4 driver configuration options
# Copyright (c) 2015 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
#
# IEEE 802.15.4 options
#
menuconfig IEEE802154
bool "IEEE 802.15.4 drivers"
depends on NETWORKING
default y if NET_L2_PHY_IEEE802154
if IEEE802154
config IEEE802154_NET_IF_NO_AUTO_START
bool "IEEE 802.15.4 interface without auto-start"
help
This option allows user to set any configuration and/or filter before
the radio becomes operational. For instance, the EUI-64 value can be
configured using net_if_set_link_addr(iface, mac, 8,
NET_LINK_IEEE802154).
When all configurations are done net_if_up() has to be invoked to
bring the interface up.
This option can be useful when using OpenThread or Zigbee. If you
have any doubt about this option leave it as default value.
if !NET_L2_PHY_IEEE802154
config IEEE802154_RAW_MODE
bool "IEEE 802.15.4 driver without the MAC stack"
select NET_RAW_MODE
help
This option enables using the drivers in a so-called "raw" mode,
i.e. without a MAC stack (the net L2 layer for 802.15.4 will not
be built). Used only for very specific cases, such as wpan_serial
and wpanusb samples.
endif # !NET_L2_PHY_IEEE802154
config IEEE802154_RDEV
bool
help
PHY is a ranging-capable device (RDEV)
config IEEE802154_VENDOR_OUI_ENABLE
bool "Support setting Vendor Organizationally Unique Identifier"
help
This option enables setting custom vendor
OUI using IEEE802154_VENDOR_OUI. After enabling,
user is obliged to set IEEE802154_VENDOR_OUI value,
as this option has no default value.
if IEEE802154_VENDOR_OUI_ENABLE
config IEEE802154_VENDOR_OUI
int "Vendor Organizationally Unique Identifier"
help
Custom vendor OUI, which makes 24 most-significant
bits of MAC address
endif # IEEE802154_VENDOR_OUI_ENABLE
source "drivers/ieee802154/Kconfig.b91"
source "drivers/ieee802154/Kconfig.cc2520"
source "drivers/ieee802154/Kconfig.kw41z"
source "drivers/ieee802154/Kconfig.mcr20a"
source "drivers/ieee802154/Kconfig.nrf5"
source "drivers/ieee802154/Kconfig.cc1200"
source "drivers/ieee802154/Kconfig.cc13xx_cc26xx"
source "drivers/ieee802154/Kconfig.rf2xx"
source "drivers/ieee802154/Kconfig.dw1000"
source "drivers/ieee802154/Kconfig.uart_pipe"
config IEEE802154_2015
bool "Support for IEEE 802.15.4-2015 frames (DEPRECATED)"
select DEPRECATED
help
Enable radio driver support for IEEE 802.15.4-2015 frames, including security handling of frames and ACKs.
config IEEE802154_CSL_ENDPOINT
bool "Support for CSL Endpoint"
help
Make this device a CSL (coordinated sampled listening) endpoint with delayed
reception handling and CSL IE injection.
config IEEE802154_CSL_DEBUG
bool "Support for CSL debugging"
depends on IEEE802154_CSL_ENDPOINT
help
Enable support for CSL debugging by avoiding sleep state in favor of receive state.
module = IEEE802154_DRIVER
module-str = IEEE 802.15.4 driver
module-help = Sets log level for IEEE 802.15.4 Device Drivers.
source "subsys/logging/Kconfig.template.log_config"
endif # IEEE802154