dts/bindings/can/can-fd-controller.yaml

# Common fields for CAN FD controllers

include: can-controller.yaml

properties:
  bus-speed-data:
    type: int
    required: true
    description: |
      Initial data phase bitrate in bit/s.
  sample-point-data:
    type: int
    description: |
      Initial data phase sample point in per mille (e.g. 875 equals 87.5%).

      This property is required unless the timing is specified using time quanta based properties
      (`sjw-data`, `prop-seg-data`, `phase-seg1-data`, and `phase-seg2-data`).

      If this property is present, the time quanta based timing properties are ignored.
  sjw-data:
    type: int
    deprecated: true
    default: 1
    description: |
      Initial time quanta of resynchronization jump width for the data phase (ISO11898-1:2015).

      Deprecated in favor of automatic calculation of a suitable default SJW based on existing
      timing parameters. Default of 1 matches the default value previously used for all in-tree CAN
      controller devicetree instances.

      Applications can still manually set the SJW using the CAN timing APIs.
  prop-seg-data:
    type: int
    deprecated: true
    description: |
      Initial time quanta of propagation segment for the data phase (ISO11898-1:2015). Deprecated in
      favor of setting advanced timing parameters from the application.
  phase-seg1-data:
    type: int
    deprecated: true
    description: |
      Initial time quanta of phase buffer 1 segment for the data phase (ISO11898-1:2015). Deprecated
      in favor of setting advanced timing parameters from the application.
  phase-seg2-data:
    type: int
    deprecated: true
    description: |
      Initial time quanta of phase buffer 2 segment for the data phase (ISO11898-1:2015). Deprecated
      in favor of setting advanced timing parameters from the application.
  tx-delay-comp-offset:
    type: int
    default: 0