blob: 49854372a5aab09d6f2a4fd3eaecefce3af7c00e [file] [log] [blame] [edit]
/*
* Copyright (c) 2023 Renesas Electronics Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT renesas_smartbond_adc
#define ADC_CONTEXT_USES_KERNEL_TIMER
#include <DA1469xAB.h>
#include "adc_context.h"
#include <zephyr/dt-bindings/adc/smartbond-adc.h>
#define LOG_LEVEL CONFIG_ADC_LOG_LEVEL
#include <zephyr/logging/log.h>
#include <zephyr/irq.h>
#include <zephyr/sys/math_extras.h>
#include <zephyr/drivers/pinctrl.h>
LOG_MODULE_REGISTER(adc_smartbond_adc);
struct adc_smartbond_cfg {
const struct pinctrl_dev_config *pcfg;
};
struct adc_smartbond_data {
struct adc_context ctx;
/* Buffer to store channel data */
uint16_t *buffer;
/* Copy of channel mask from sequence */
uint32_t channel_read_mask;
/* Number of bits in sequence channels */
uint8_t sequence_channel_count;
/* Index in buffer to store current value to */
uint8_t result_index;
};
#define SMARTBOND_ADC_CHANNEL_COUNT 8
/*
* Channels are handled by software this array holds individual
* settings for each channel that must be applied before conversion.
*/
struct adc_smartbond_channel_cfg {
uint32_t gp_adc_ctrl_reg;
uint32_t gp_adc_ctrl2_reg;
} m_channels[SMARTBOND_ADC_CHANNEL_COUNT];
/* Implementation of the ADC driver API function: adc_channel_setup. */
static int adc_smartbond_channel_setup(const struct device *dev,
const struct adc_channel_cfg *channel_cfg)
{
uint8_t channel_id = channel_cfg->channel_id;
struct adc_smartbond_channel_cfg *config = &m_channels[channel_id];
if (channel_id >= SMARTBOND_ADC_CHANNEL_COUNT) {
return -EINVAL;
}
if (channel_cfg->acquisition_time != ADC_ACQ_TIME_DEFAULT) {
LOG_ERR("Selected ADC acquisition time is not valid");
return -EINVAL;
}
if (channel_cfg->differential) {
if (channel_cfg->input_positive != SMARTBOND_GPADC_P1_09 &&
channel_cfg->input_positive != SMARTBOND_GPADC_P0_08) {
LOG_ERR("Differential channels supported only for P1_09 and P0_08");
return -EINVAL;
}
}
switch (channel_cfg->gain) {
case ADC_GAIN_1_3:
/* Turn on attenuator and increase sample time to 32 cycles */
config->gp_adc_ctrl2_reg = 0x101;
break;
case ADC_GAIN_1:
config->gp_adc_ctrl2_reg = 0;
break;
default:
LOG_ERR("Selected ADC gain is not valid");
return -EINVAL;
}
switch (channel_cfg->reference) {
case ADC_REF_INTERNAL:
break;
default:
LOG_ERR("Selected ADC reference is not valid");
return -EINVAL;
}
config->gp_adc_ctrl_reg =
channel_cfg->input_positive << GPADC_GP_ADC_CTRL_REG_GP_ADC_SEL_Pos;
if (!channel_cfg->differential) {
config->gp_adc_ctrl_reg |= GPADC_GP_ADC_CTRL_REG_GP_ADC_SE_Msk;
}
return 0;
}
#define PER_CHANNEL_ADC_CONFIG_MASK (GPADC_GP_ADC_CTRL_REG_GP_ADC_SEL_Msk | \
GPADC_GP_ADC_CTRL_REG_GP_ADC_SE_Msk)
static int pop_count(uint32_t n)
{
return __builtin_popcount(n);
}
static void adc_context_start_sampling(struct adc_context *ctx)
{
uint32_t val;
struct adc_smartbond_data *data =
CONTAINER_OF(ctx, struct adc_smartbond_data, ctx);
/* Extract lower channel from sequence mask */
int current_channel = u32_count_trailing_zeros(data->channel_read_mask);
if (ctx->sequence.calibrate) {
/* TODO: Add calibration code */
} else {
val = GPADC->GP_ADC_CTRL_REG & ~PER_CHANNEL_ADC_CONFIG_MASK;
val |= m_channels[current_channel].gp_adc_ctrl_reg;
val |= GPADC_GP_ADC_CTRL_REG_GP_ADC_START_Msk |
GPADC_GP_ADC_CTRL_REG_GP_ADC_MINT_Msk;
GPADC->GP_ADC_CTRL2_REG = m_channels[current_channel].gp_adc_ctrl2_reg;
GPADC->GP_ADC_CTRL_REG = val;
}
}
static void adc_context_update_buffer_pointer(struct adc_context *ctx,
bool repeat)
{
struct adc_smartbond_data *data =
CONTAINER_OF(ctx, struct adc_smartbond_data, ctx);
if (!repeat) {
data->buffer += data->sequence_channel_count;
}
}
static int check_buffer_size(const struct adc_sequence *sequence,
uint8_t active_channels)
{
size_t needed_buffer_size;
needed_buffer_size = active_channels * sizeof(uint16_t);
if (sequence->options) {
needed_buffer_size *= (1 + sequence->options->extra_samplings);
}
if (sequence->buffer_size < needed_buffer_size) {
LOG_ERR("Provided buffer is too small (%u/%u)",
sequence->buffer_size, needed_buffer_size);
return -ENOMEM;
}
return 0;
}
static int start_read(const struct device *dev,
const struct adc_sequence *sequence)
{
int error;
struct adc_smartbond_data *data = dev->data;
if (sequence->oversampling > 7U) {
LOG_ERR("Invalid oversampling");
return -EINVAL;
}
if ((sequence->channels == 0) ||
((sequence->channels & ~BIT_MASK(SMARTBOND_ADC_CHANNEL_COUNT)) != 0)) {
LOG_ERR("Channel scanning is not supported");
return -EINVAL;
}
if (sequence->resolution < 8 || sequence->resolution > 15) {
LOG_ERR("ADC resolution value %d is not valid",
sequence->resolution);
return -EINVAL;
}
error = check_buffer_size(sequence, 1);
if (error) {
return error;
}
data->buffer = sequence->buffer;
data->channel_read_mask = sequence->channels;
data->sequence_channel_count = pop_count(sequence->channels);
data->result_index = 0;
adc_context_start_read(&data->ctx, sequence);
error = adc_context_wait_for_completion(&data->ctx);
return error;
}
static void adc_smartbond_isr(const struct device *dev)
{
struct adc_smartbond_data *data = dev->data;
int current_channel = u32_count_trailing_zeros(data->channel_read_mask);
GPADC->GP_ADC_CLEAR_INT_REG = 0;
/* Store current channel value, result is left justified, move bits right */
data->buffer[data->result_index++] = ((uint16_t)GPADC->GP_ADC_RESULT_REG) >>
(16 - data->ctx.sequence.resolution);
/* Exclude channel from mask for further reading */
data->channel_read_mask ^= 1 << current_channel;
if (data->channel_read_mask == 0) {
adc_context_on_sampling_done(&data->ctx, dev);
} else {
adc_context_start_sampling(&data->ctx);
}
LOG_DBG("%s ISR triggered.", dev->name);
}
/* Implementation of the ADC driver API function: adc_read. */
static int adc_smartbond_read(const struct device *dev,
const struct adc_sequence *sequence)
{
int error;
struct adc_smartbond_data *data = dev->data;
adc_context_lock(&data->ctx, false, NULL);
error = start_read(dev, sequence);
adc_context_release(&data->ctx, error);
return error;
}
#if defined(CONFIG_ADC_ASYNC)
/* Implementation of the ADC driver API function: adc_read_sync. */
static int adc_smartbond_read_async(const struct device *dev,
const struct adc_sequence *sequence,
struct k_poll_signal *async)
{
struct adc_smartbond_data *data = dev->data;
int error;
adc_context_lock(&data->ctx, true, async);
error = start_read(dev, sequence);
adc_context_release(&data->ctx, error);
return error;
}
#endif /* CONFIG_ADC_ASYNC */
static int adc_smartbond_init(const struct device *dev)
{
int err;
struct adc_smartbond_data *data = dev->data;
const struct adc_smartbond_cfg *config = dev->config;
GPADC->GP_ADC_CTRL_REG = GPADC_GP_ADC_CTRL_REG_GP_ADC_EN_Msk;
GPADC->GP_ADC_CTRL2_REG = 0;
GPADC->GP_ADC_CTRL3_REG = 0x40;
GPADC->GP_ADC_CLEAR_INT_REG = 0x0;
/*
* Configure dt provided device signals when available.
* pinctrl is optional so ENOENT is not setup failure.
*/
err = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
if (err < 0 && err != -ENOENT) {
LOG_ERR("ADC pinctrl setup failed (%d)", err);
return err;
}
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
adc_smartbond_isr, DEVICE_DT_INST_GET(0), 0);
NVIC_ClearPendingIRQ(DT_INST_IRQN(0));
NVIC_EnableIRQ(DT_INST_IRQN(0));
adc_context_unlock_unconditionally(&data->ctx);
return 0;
}
static const struct adc_driver_api adc_smartbond_driver_api = {
.channel_setup = adc_smartbond_channel_setup,
.read = adc_smartbond_read,
#ifdef CONFIG_ADC_ASYNC
.read_async = adc_smartbond_read_async,
#endif
.ref_internal = 1200,
};
/*
* There is only one instance on supported SoCs, so inst is guaranteed
* to be 0 if any instance is okay. (We use adc_0 above, so the driver
* is relying on the numeric instance value in a way that happens to
* be safe.)
*
* Just in case that assumption becomes invalid in the future, we use
* a BUILD_ASSERT().
*/
#define ADC_INIT(inst) \
BUILD_ASSERT((inst) == 0, \
"multiple instances not supported"); \
PINCTRL_DT_INST_DEFINE(inst); \
static const struct adc_smartbond_cfg adc_smartbond_cfg_##inst = {\
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
}; \
static struct adc_smartbond_data adc_smartbond_data_##inst = { \
ADC_CONTEXT_INIT_TIMER(adc_smartbond_data_##inst, ctx), \
ADC_CONTEXT_INIT_LOCK(adc_smartbond_data_##inst, ctx), \
ADC_CONTEXT_INIT_SYNC(adc_smartbond_data_##inst, ctx), \
}; \
DEVICE_DT_INST_DEFINE(0, \
adc_smartbond_init, NULL, \
&adc_smartbond_data_##inst, \
&adc_smartbond_cfg_##inst, \
POST_KERNEL, \
CONFIG_ADC_INIT_PRIORITY, \
&adc_smartbond_driver_api);
DT_INST_FOREACH_STATUS_OKAY(ADC_INIT)