blob: 630292a7287007514986b7102a4b90c57eb98713 [file] [log] [blame] [edit]
/*
* Copyright (c) 2022 Florin Stancu <niflostancu@gmail.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ti_cc13xx_cc26xx_watchdog
#include <zephyr/drivers/watchdog.h>
#include <zephyr/irq.h>
#include <soc.h>
#include <errno.h>
#define LOG_LEVEL CONFIG_WDT_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(wdt_cc13xx_cc26xx);
/* Driverlib includes */
#include <driverlib/watchdog.h>
/*
* TI CC13xx/CC26xx watchdog is a 32-bit timer that runs on the MCU clock
* with a fixed 32 divider.
*
* For the default MCU frequency of 48MHz:
* 1ms = (48e6 / 32 / 1000) = 1500 ticks
* Max. value = 2^32 / 1500 ~= 2863311 ms
*
* The watchdog will issue reset only on second in turn time-out (if the timer
* or the interrupt aren't reset after the first time-out). By default, regular
* interrupt is generated but platform supports also NMI (can be enabled by
* setting the `interrupt-nmi` boolean DT property).
*/
#define CPU_FREQ DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
#define WATCHDOG_DIV_RATIO 32
#define WATCHDOG_MS_RATIO (CPU_FREQ / WATCHDOG_DIV_RATIO / 1000)
#define WATCHDOG_MAX_RELOAD_MS (0xFFFFFFFFu / WATCHDOG_MS_RATIO)
#define WATCHDOG_MS_TO_TICKS(_ms) ((_ms) * WATCHDOG_MS_RATIO)
struct wdt_cc13xx_cc26xx_data {
uint8_t enabled;
uint32_t reload;
wdt_callback_t cb;
uint8_t flags;
};
struct wdt_cc13xx_cc26xx_cfg {
uint32_t reg;
uint8_t irq_nmi;
void (*irq_cfg_func)(void);
};
static int wdt_cc13xx_cc26xx_install_timeout(const struct device *dev,
const struct wdt_timeout_cfg *cfg)
{
struct wdt_cc13xx_cc26xx_data *data = dev->data;
/* window watchdog not supported */
if (cfg->window.min != 0U || cfg->window.max == 0U) {
return -EINVAL;
}
/*
* Note: since this SoC doesn't define CONFIG_WDT_MULTISTAGE, we don't need to
* specifically check for it and return ENOTSUP
*/
if (cfg->window.max > WATCHDOG_MAX_RELOAD_MS) {
return -EINVAL;
}
data->reload = WATCHDOG_MS_TO_TICKS(cfg->window.max);
data->cb = cfg->callback;
data->flags = cfg->flags;
LOG_DBG("raw reload value: %d", data->reload);
return 0;
}
static int wdt_cc13xx_cc26xx_setup(const struct device *dev, uint8_t options)
{
const struct wdt_cc13xx_cc26xx_cfg *config = dev->config;
struct wdt_cc13xx_cc26xx_data *data = dev->data;
/*
* Note: don't check if watchdog is already enabled, an application might
* want to dynamically re-configure its options (e.g., decrease the reload
* value for critical sections).
*/
WatchdogUnlock();
/* clear any previous interrupt flags */
WatchdogIntClear();
/* Stall the WDT counter when halted by debugger */
if (options & WDT_OPT_PAUSE_HALTED_BY_DBG) {
WatchdogStallEnable();
} else {
WatchdogStallDisable();
}
/*
* According to TI's datasheets, the WDT is paused in STANDBY mode,
* so we simply continue with the setup => don't do this check:
* > if (options & WDT_OPT_PAUSE_IN_SLEEP) {
* > return -ENOTSUP;
* > }
*/
/* raw reload value was computed by `_install_timeout()` */
WatchdogReloadSet(data->reload);
/* use the Device Tree-configured interrupt type */
if (config->irq_nmi) {
LOG_DBG("NMI enabled");
WatchdogIntTypeSet(WATCHDOG_INT_TYPE_NMI);
} else {
WatchdogIntTypeSet(WATCHDOG_INT_TYPE_INT);
}
switch ((data->flags & WDT_FLAG_RESET_MASK)) {
case WDT_FLAG_RESET_NONE:
LOG_DBG("reset disabled");
WatchdogResetDisable();
break;
case WDT_FLAG_RESET_SOC:
LOG_DBG("reset enabled");
WatchdogResetEnable();
break;
default:
WatchdogLock();
return -ENOTSUP;
}
data->enabled = 1;
WatchdogEnable();
WatchdogLock();
LOG_DBG("done");
return 0;
}
static int wdt_cc13xx_cc26xx_disable(const struct device *dev)
{
struct wdt_cc13xx_cc26xx_data *data = dev->data;
if (!WatchdogRunning()) {
return -EFAULT;
}
/*
* Node: once started, the watchdog timer cannot be stopped!
* All we can do is disable the timeout reset, but the interrupt
* will be triggered if it was enabled (though it won't trigger the
* user callback due to `enabled` being unsed)!
*/
data->enabled = 0;
WatchdogUnlock();
WatchdogResetDisable();
WatchdogLock();
return 0;
}
static int wdt_cc13xx_cc26xx_feed(const struct device *dev, int channel_id)
{
struct wdt_cc13xx_cc26xx_data *data = dev->data;
WatchdogUnlock();
WatchdogIntClear();
WatchdogReloadSet(data->reload);
WatchdogLock();
LOG_DBG("feed %i", data->reload);
return 0;
}
static void wdt_cc13xx_cc26xx_isr(const struct device *dev)
{
struct wdt_cc13xx_cc26xx_data *data = dev->data;
/* Simulate the watchdog being disabled: don't call the handler. */
if (!data->enabled) {
return;
}
/*
* Note: don't clear the interrupt here, leave it for the callback
* to decide (by calling `_feed()`)
*/
LOG_DBG("ISR");
if (data->cb) {
data->cb(dev, 0);
}
}
static int wdt_cc13xx_cc26xx_init(const struct device *dev)
{
const struct wdt_cc13xx_cc26xx_cfg *config = dev->config;
uint8_t options = 0;
LOG_DBG("init");
config->irq_cfg_func();
if (IS_ENABLED(CONFIG_WDT_DISABLE_AT_BOOT)) {
return 0;
}
#ifdef CONFIG_DEBUG
/* when CONFIG_DEBUG is enabled, pause the WDT during debugging */
options = WDT_OPT_PAUSE_HALTED_BY_DBG;
#endif /* CONFIG_DEBUG */
return wdt_cc13xx_cc26xx_setup(dev, options);
}
static const struct wdt_driver_api wdt_cc13xx_cc26xx_api = {
.setup = wdt_cc13xx_cc26xx_setup,
.disable = wdt_cc13xx_cc26xx_disable,
.install_timeout = wdt_cc13xx_cc26xx_install_timeout,
.feed = wdt_cc13xx_cc26xx_feed,
};
#define CC13XX_CC26XX_WDT_INIT(index) \
static void wdt_cc13xx_cc26xx_irq_cfg_##index(void) \
{ \
if (DT_INST_PROP(index, interrupt_nmi)) { \
return; /* NMI interrupt is used */ \
} \
IRQ_CONNECT(DT_INST_IRQN(index), \
DT_INST_IRQ(index, priority), \
wdt_cc13xx_cc26xx_isr, DEVICE_DT_INST_GET(index), 0); \
irq_enable(DT_INST_IRQN(index)); \
} \
static struct wdt_cc13xx_cc26xx_data wdt_cc13xx_cc26xx_data_##index = { \
.reload = WATCHDOG_MS_TO_TICKS( \
CONFIG_WDT_CC13XX_CC26XX_INITIAL_TIMEOUT), \
.cb = NULL, \
.flags = 0, \
}; \
static struct wdt_cc13xx_cc26xx_cfg wdt_cc13xx_cc26xx_cfg_##index = { \
.reg = DT_INST_REG_ADDR(index), \
.irq_nmi = DT_INST_PROP(index, interrupt_nmi), \
.irq_cfg_func = wdt_cc13xx_cc26xx_irq_cfg_##index, \
}; \
DEVICE_DT_INST_DEFINE(index, \
wdt_cc13xx_cc26xx_init, NULL, \
&wdt_cc13xx_cc26xx_data_##index, \
&wdt_cc13xx_cc26xx_cfg_##index, \
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, \
&wdt_cc13xx_cc26xx_api);
DT_INST_FOREACH_STATUS_OKAY(CC13XX_CC26XX_WDT_INIT)