blob: a426a84ea3ea1aab286b1aa764d9e8e3f040b984 [file] [log] [blame]
/*
* Copyright (c) 2017 I-SENSE group of ICCS
* Copyright (c) 2019 Centaur Analytics, Inc
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <arm/armv7-m.dtsi>
#include <zephyr/dt-bindings/clock/stm32f3_clock.h>
#include <zephyr/dt-bindings/i2c/i2c.h>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/pwm/pwm.h>
#include <zephyr/dt-bindings/pwm/stm32_pwm.h>
#include <zephyr/dt-bindings/dma/stm32_dma.h>
#include <zephyr/dt-bindings/reset/stm32f0_1_3_reset.h>
#include <zephyr/dt-bindings/adc/adc.h>
#include <freq.h>
/ {
chosen {
zephyr,flash-controller = &flash;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-m4f";
reg = <0>;
};
};
sram0: memory@20000000 {
compatible = "mmio-sram";
};
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
compatible = "st,stm32-hse-clock";
status = "disabled";
};
clk_hsi: clk-hsi {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <DT_FREQ_M(8)>;
status = "disabled";
};
clk_lse: clk-lse {
#clock-cells = <0>;
compatible = "st,stm32-lse-clock";
clock-frequency = <32768>;
driving-capability = <0>;
status = "disabled";
};
clk_lsi: clk-lsi {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <DT_FREQ_K(40)>;
status = "disabled";
};
pll: pll {
#clock-cells = <0>;
compatible = "st,stm32f0-pll-clock";
status = "disabled";
};
};
soc {
flash: flash-controller@40022000 {
compatible = "st,stm32-flash-controller", "st,stm32f1-flash-controller";
reg = <0x40022000 0x400>;
interrupts = <4 0>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000010>;
#address-cells = <1>;
#size-cells = <1>;
flash0: flash@8000000 {
compatible = "st,stm32-nv-flash", "soc-nv-flash";
write-block-size = <2>;
erase-block-size = <2048>;
/* maximum erase time for a 2K sector */
max-erase-time = <40>;
};
};
rcc: rcc@40021000 {
compatible = "st,stm32f3-rcc";
#clock-cells = <2>;
reg = <0x40021000 0x400>;
rctl: reset-controller {
compatible = "st,stm32-rcc-rctl";
#reset-cells = <1>;
};
};
exti: interrupt-controller@40010400 {
compatible = "st,stm32-exti";
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
reg = <0x40010400 0x400>;
num-lines = <16>;
interrupts = <6 0>, <7 0>, <8 0>, <9 0>,
<10 0>, <23 0>, <40 0>;
interrupt-names = "line0", "line1", "line2", "line3",
"line4", "line5-9", "line10-15";
line-ranges = <0 1>, <1 1>, <2 1>, <3 1>,
<4 1>, <5 5>, <10 6>;
};
pinctrl: pin-controller@48000000 {
compatible = "st,stm32-pinctrl";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x48000000 0x1800>;
gpioa: gpio@48000000 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48000000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00020000>;
};
gpiob: gpio@48000400 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48000400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00040000>;
};
gpioc: gpio@48000800 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48000800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00080000>;
};
gpiod: gpio@48000c00 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48000c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00100000>;
};
gpiof: gpio@48001400 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48001400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00400000>;
};
};
iwdg: watchdog@40003000 {
compatible = "st,stm32-watchdog";
reg = <0x40003000 0x400>;
status = "disabled";
};
wwdg: watchdog@40002c00 {
compatible = "st,stm32-window-watchdog";
reg = <0x40002C00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000800>;
interrupts = <0 7>;
status = "disabled";
};
usart1: serial@40013800 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40013800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00004000>;
resets = <&rctl STM32_RESET(APB2, 14U)>;
interrupts = <37 0>;
status = "disabled";
};
usart2: serial@40004400 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00020000>;
resets = <&rctl STM32_RESET(APB1, 17U)>;
interrupts = <38 0>;
status = "disabled";
};
usart3: serial@40004800 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>;
resets = <&rctl STM32_RESET(APB1, 18U)>;
interrupts = <39 0>;
status = "disabled";
};
uart4: serial@40004c00 {
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>;
resets = <&rctl STM32_RESET(APB1, 19U)>;
interrupts = <52 0>;
status = "disabled";
};
i2c1: i2c@40005400 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40005400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00200000>,
/* I2C clock source should always be defined,
* even for the default value
*/
<&rcc STM32_SRC_SYSCLK I2C1_SEL(1)>;
interrupts = <31 0>, <32 0>;
interrupt-names = "event", "error";
status = "disabled";
};
spi1: spi@40013000 {
compatible = "st,stm32-spi-fifo", "st,stm32-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40013000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00001000>;
interrupts = <35 5>;
status = "disabled";
};
dac1: dac@40007400 {
compatible = "st,stm32-dac";
reg = <0x40007400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x20000000>;
status = "disabled";
#io-channel-cells = <1>;
};
usb: usb@40005c00 {
compatible = "st,stm32-usb";
reg = <0x40005c00 0x400>;
interrupts = <20 0>;
interrupt-names = "usb";
num-bidir-endpoints = <8>;
ram-size = <512>;
phys = <&usb_fs_phy>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00800000>;
status = "disabled";
};
timers2: timers@40000000 {
compatible = "st,stm32-timers";
reg = <0x40000000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000001>;
resets = <&rctl STM32_RESET(APB1, 0U)>;
interrupts = <28 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
timers3: timers@40000400 {
compatible = "st,stm32-timers";
reg = <0x40000400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000002>;
resets = <&rctl STM32_RESET(APB1, 1U)>;
interrupts = <29 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
timers6: timers@40001000 {
compatible = "st,stm32-timers";
reg = <0x40001000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000010>;
resets = <&rctl STM32_RESET(APB1, 4U)>;
interrupts = <54 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
timers7: timers@40001400 {
compatible = "st,stm32-timers";
reg = <0x40001400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000020>;
resets = <&rctl STM32_RESET(APB1, 5U)>;
interrupts = <55 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
timers15: timers@40014000 {
compatible = "st,stm32-timers";
reg = <0x40014000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00010000>;
resets = <&rctl STM32_RESET(APB2, 16U)>;
interrupts = <24 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
timers16: timers@40014400 {
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00020000>;
resets = <&rctl STM32_RESET(APB2, 17U)>;
interrupts = <25 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
timers17: timers@40014800 {
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00040000>;
resets = <&rctl STM32_RESET(APB2, 18U)>;
interrupts = <26 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
rtc: rtc@40002800 {
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>;
interrupts = <41 0>;
prescaler = <32768>;
status = "disabled";
};
can1: can@40006400 {
compatible = "st,stm32-bxcan";
reg = <0x40006400 0x400>;
interrupts = <19 0>, <20 0>, <21 0>, <22 0>;
interrupt-names = "TX", "RX0", "RX1", "SCE";
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>;
status = "disabled";
sample-point = <875>;
};
dma1: dma@40020000 {
compatible = "st,stm32-dma-v2bis";
#dma-cells = <2>;
reg = <0x40020000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x1>;
interrupts = <11 0 12 0 13 0 14 0 15 0 16 0 17 0>;
status = "disabled";
};
};
die_temp: dietemp {
compatible = "st,stm32-temp-cal";
ts-cal1-addr = <0x1FFFF7B8>;
ts-cal2-addr = <0x1FFFF7C2>;
ts-cal1-temp = <30>;
ts-cal2-temp = <110>;
ts-cal-vrefanalog = <3300>;
io-channels = <&adc1 16>;
status = "disabled";
};
vref: vref {
compatible = "st,stm32-vref";
vrefint-cal-addr = <0x1FFFF7BA>;
vrefint-cal-mv = <3300>;
io-channels = <&adc1 18>;
status = "disabled";
};
vbat: vbat {
compatible = "st,stm32-vbat";
ratio = <2>;
io-channels = <&adc1 17>;
status = "disabled";
};
usb_fs_phy: usbphy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
};
&nvic {
arm,num-irq-priority-bits = <4>;
};