| /* |
| * Copyright (c) 2017 Linaro Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <st/stm32l4.dtsi> |
| |
| / { |
| soc { |
| pinctrl: pin-controller@48000000 { |
| |
| gpiod: gpio@48000c00 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48000c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000008>; |
| label = "GPIOD"; |
| }; |
| |
| gpioe: gpio@48001000 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48001000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000010>; |
| label = "GPIOE"; |
| }; |
| |
| gpiof: gpio@48001400 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48001400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000020>; |
| label = "GPIOF"; |
| }; |
| |
| gpiog: gpio@48001800 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48001800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000040>; |
| label = "GPIOG"; |
| }; |
| }; |
| |
| uart4: serial@40004c00 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40004c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>; |
| interrupts = <52 0>; |
| status = "disabled"; |
| label = "UART_4"; |
| }; |
| |
| uart5: serial@40005000 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40005000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>; |
| interrupts = <53 0>; |
| status = "disabled"; |
| label = "UART_5"; |
| }; |
| |
| i2c2: i2c@40005800 { |
| compatible = "st,stm32-i2c-v2"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40005800 0x400>; |
| interrupts = <33 0>, <34 0>; |
| interrupt-names = "event", "error"; |
| status = "disabled"; |
| label= "I2C_2"; |
| }; |
| |
| i2c3: i2c@40005C00 { |
| compatible = "st,stm32-i2c-v2"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40005C00 0x400>; |
| interrupts = <72 0>, <73 0>; |
| interrupt-names = "event", "error"; |
| status = "disabled"; |
| label= "I2C_3"; |
| }; |
| |
| spi3: spi@40003C00 { |
| compatible = "st,stm32-spi-fifo"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40003C00 0x400>; |
| interrupts = <51 5>; |
| status = "disabled"; |
| label = "SPI_3"; |
| }; |
| |
| usbotg_fs: otgfs@50000000 { |
| compatible = "st,stm32-otgfs"; |
| reg = <0x50000000 0x40000>; |
| interrupts = <67 0>; |
| interrupt-names = "otgfs"; |
| num-bidir-endpoints = <1>; |
| num-in-endpoints = <5>; |
| num-out-endpoints = <5>; |
| ram-size = <1280>; |
| status = "disabled"; |
| label= "OTGFS"; |
| }; |
| }; |
| }; |
