| CONFIG_NETWORKING=y |
| CONFIG_NET_TCP=y |
| CONFIG_RANDOM_GENERATOR=y |
| CONFIG_NET_ARP=y |
| CONFIG_NET_L2_ETHERNET=y |
| CONFIG_NET_LOG=y |
| CONFIG_INIT_STACKS=y |
| |
| CONFIG_NET_NBUF_RX_COUNT=16 |
| CONFIG_NET_NBUF_TX_COUNT=16 |
| CONFIG_NET_NBUF_RX_DATA_COUNT=16 |
| CONFIG_NET_NBUF_TX_DATA_COUNT=16 |
| |
| CONFIG_NET_IPV6_RA_RDNSS=y |
| CONFIG_NET_IFACE_UNICAST_IPV4_ADDR_COUNT=3 |
| |
| CONFIG_PRINTK=y |
| #CONFIG_NET_DEBUG_NET_BUF=y |
| |
| CONFIG_NET_IPV4=y |
| # Enable IPv6 support |
| CONFIG_NET_IPV6=n |
| |
| # Enable the MQTT Lib |
| CONFIG_MQTT_LIB=y |
| |
| CONFIG_NET_APP_SETTINGS=y |
| CONFIG_NET_APP_MY_IPV6_ADDR="2001:db8::1" |
| CONFIG_NET_APP_PEER_IPV6_ADDR="2001:db8::2" |
| |
| CONFIG_NET_APP_MY_IPV4_ADDR="192.168.1.101" |
| CONFIG_NET_APP_PEER_IPV4_ADDR="192.168.1.10" |
| |
| CONFIG_MAIN_STACK_SIZE=2048 |
| |
| # For IPv6 |
| CONFIG_NET_NBUF_DATA_SIZE=256 |
| |
| CONFIG_TEST_RANDOM_GENERATOR=y |
| |
| # ENC28J60 Ethernet Device |
| CONFIG_ETH_ENC28J60=y |
| CONFIG_ETH_ENC28J60_0=y |
| CONFIG_ETH_ENC28J60_0_SPI_PORT_NAME="SPI_1" |
| CONFIG_ETH_ENC28J60_0_MAC3=0x2D |
| CONFIG_ETH_ENC28J60_0_MAC4=0x30 |
| CONFIG_ETH_ENC28J60_0_MAC5=0x36 |
| |
| # Arduino 101 |
| CONFIG_SPI=y |
| |
| CONFIG_ZTEST=y |
