blob: 29487096e93a4abd35f2365289cad4686268c5a0 [file] [log] [blame]
# SPDX-License-Identifier: Apache-2.0
file(MAKE_DIRECTORY ${PROJECT_BINARY_DIR}/include/generated)
# Zephyr code can configure itself based on a KConfig'uration with the
# header file autoconf.h. There exists an analogous file
# generated_dts_board_unfixed.h that allows configuration based on information
# encoded in DTS.
#
# Here we call on dtc, the gcc preprocessor, and
# scripts/dts/extract_dts_includes.py to generate this header file at
# CMake configure-time.
#
# See ~/zephyr/doc/dts
set(GENERATED_DTS_BOARD_UNFIXED_H ${PROJECT_BINARY_DIR}/include/generated/generated_dts_board_unfixed.h)
set(GENERATED_DTS_BOARD_CONF ${PROJECT_BINARY_DIR}/include/generated/generated_dts_board.conf)
set(DTS_POST_CPP ${PROJECT_BINARY_DIR}/${BOARD}.dts.pre.tmp)
set_ifndef(DTS_SOURCE ${BOARD_DIR}/${BOARD}.dts)
if(DEFINED DTS_COMMON_OVERLAYS)
# TODO: remove this warning in version 1.16
message(FATAL_ERROR "DTS_COMMON_OVERLAYS is no longer supported. Use DTC_OVERLAY_FILE instead.")
endif()
# 'DTS_ROOT' is a list of directories where a directory tree with DT
# files may be found. It always includes the application directory,
# the board directory, and ${ZEPHYR_BASE}.
list(APPEND
DTS_ROOT
${APPLICATION_SOURCE_DIR}
${BOARD_DIR}
${ZEPHYR_BASE}
)
list(REMOVE_DUPLICATES DTS_ROOT)
set(dts_files
${DTS_SOURCE}
${shield_dts_files}
)
# TODO: What to do about non-posix platforms where NOT CONFIG_HAS_DTS (xtensa)?
# Drop support for NOT CONFIG_HAS_DTS perhaps?
if(EXISTS ${DTS_SOURCE})
set(SUPPORTS_DTS 1)
else()
set(SUPPORTS_DTS 0)
endif()
if(SUPPORTS_DTS)
if(DTC_OVERLAY_FILE)
# Convert from space-separated files into file list
string(REPLACE " " ";" DTC_OVERLAY_FILE_AS_LIST ${DTC_OVERLAY_FILE})
list(APPEND
dts_files
${DTC_OVERLAY_FILE_AS_LIST}
)
endif()
set(i 0)
unset(DTC_INCLUDE_FLAG_FOR_DTS)
foreach(dts_file ${dts_files})
list(APPEND DTC_INCLUDE_FLAG_FOR_DTS
-include ${dts_file})
if(i EQUAL 0)
message(STATUS "Loading ${dts_file} as base")
else()
message(STATUS "Overlaying ${dts_file}")
endif()
math(EXPR i "${i}+1")
endforeach()
foreach(dts_root ${DTS_ROOT})
foreach(dts_root_path
include
dts/common
dts/${ARCH}
dts
)
set(full_path ${dts_root}/${dts_root_path})
if(EXISTS ${full_path})
list(APPEND
DTS_ROOT_SYSTEM_INCLUDE_DIRS
-isystem ${full_path}
)
endif()
endforeach()
endforeach()
foreach(dts_root ${DTS_ROOT})
set(full_path ${dts_root}/dts/bindings)
if(EXISTS ${full_path})
list(APPEND
DTS_ROOT_BINDINGS
${full_path}
)
endif()
endforeach()
# Cache the location of the root bindings so they can be used by
# scripts which use the build directory.
set(CACHED_DTS_ROOT_BINDINGS ${DTS_ROOT_BINDINGS} CACHE INTERNAL
"DT bindings root directories")
# TODO: Cut down on CMake configuration time by avoiding
# regeneration of generated_dts_board_unfixed.h on every configure. How
# challenging is this? What are the dts dependencies? We run the
# preprocessor, and it seems to be including all kinds of
# directories with who-knows how many header files.
# Run the C preprocessor on an empty C source file that has one or
# more DTS source files -include'd into it to create the
# intermediary file *.dts.pre.tmp. Also, generate a dependency file
# so that changes to DT sources are detected.
execute_process(
COMMAND ${CMAKE_C_COMPILER}
-x assembler-with-cpp
-nostdinc
${DTS_ROOT_SYSTEM_INCLUDE_DIRS}
${DTC_INCLUDE_FLAG_FOR_DTS} # include the DTS source and overlays
${NOSYSDEF_CFLAG}
-D__DTS__
-P
-E # Stop after preprocessing
-MD # Generate a dependency file as a side-effect
-MF ${BOARD}.dts.pre.d
-o ${BOARD}.dts.pre.tmp
${ZEPHYR_BASE}/misc/empty_file.c
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
RESULT_VARIABLE ret
)
if(NOT "${ret}" STREQUAL "0")
message(FATAL_ERROR "command failed with return code: ${ret}")
endif()
# Parse the generated dependency file to find the DT sources that
# were included and then add them to the list of files that trigger
# a re-run of CMake.
toolchain_parse_make_rule(
${PROJECT_BINARY_DIR}/${BOARD}.dts.pre.d
include_files # Output parameter
)
set_property(DIRECTORY APPEND PROPERTY
CMAKE_CONFIGURE_DEPENDS
${include_files}
)
# Run the DTC on *.dts.pre.tmp to create the intermediary file *.dts_compiled
set(DTC_WARN_UNIT_ADDR_IF_ENABLED "")
check_dtc_flag("-Wunique_unit_address_if_enabled" check)
if (check)
set(DTC_WARN_UNIT_ADDR_IF_ENABLED "-Wunique_unit_address_if_enabled")
endif()
set(DTC_NO_WARN_UNIT_ADDR "")
check_dtc_flag("-Wno-unique_unit_address" check)
if (check)
set(DTC_NO_WARN_UNIT_ADDR "-Wno-unique_unit_address")
endif()
execute_process(
COMMAND ${DTC}
-O dts
-o ${BOARD}.dts_compiled
-b 0
-E unit_address_vs_reg
${DTC_NO_WARN_UNIT_ADDR}
${DTC_WARN_UNIT_ADDR_IF_ENABLED}
${EXTRA_DTC_FLAGS} # User settable
${BOARD}.dts.pre.tmp
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
RESULT_VARIABLE ret
)
if(NOT "${ret}" STREQUAL "0")
message(FATAL_ERROR "command failed with return code: ${ret}")
endif()
#
# Run gen_defines.py to create a .conf file and a header file
#
set(CMD_NEW_EXTRACT ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/scripts/dts/gen_defines.py
--dts ${BOARD}.dts.pre.tmp
--bindings-dirs ${DTS_ROOT_BINDINGS}
--conf-out ${GENERATED_DTS_BOARD_CONF}
--header-out ${GENERATED_DTS_BOARD_UNFIXED_H}
)
execute_process(
COMMAND ${CMD_NEW_EXTRACT}
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
RESULT_VARIABLE ret
)
if(NOT "${ret}" STREQUAL "0")
message(FATAL_ERROR "new extractor failed with return code: ${ret}")
endif()
#
# Run extract_dts_includes.py (the older DT/binding parser) to generate some
# legacy identifiers (via --deprecated-only). This will go away later.
#
set(CMD_EXTRACT_DTS_INCLUDES ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/scripts/dts/extract_dts_includes.py
--deprecated-only
--dts ${BOARD}.dts_compiled
--yaml ${DTS_ROOT_BINDINGS}
--include ${GENERATED_DTS_BOARD_UNFIXED_H}.deprecated
--old-alias-names
)
execute_process(
COMMAND ${CMD_EXTRACT_DTS_INCLUDES}
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
RESULT_VARIABLE ret
)
if(NOT "${ret}" STREQUAL "0")
message(FATAL_ERROR "command failed with return code: ${ret}")
endif()
else()
file(WRITE ${GENERATED_DTS_BOARD_UNFIXED_H} "/* WARNING. THIS FILE IS AUTO-GENERATED. DO NOT MODIFY! */")
file(WRITE ${GENERATED_DTS_BOARD_UNFIXED_H}.deprecated "/* WARNING. THIS FILE IS AUTO-GENERATED. DO NOT MODIFY! */")
endif(SUPPORTS_DTS)