| /* Bluetooth Mesh */ |
| |
| /* |
| * Copyright (c) 2017 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr.h> |
| #include <errno.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <sys/util.h> |
| #include <sys/byteorder.h> |
| |
| #include <net/buf.h> |
| |
| #include <bluetooth/hci.h> |
| #include <bluetooth/mesh.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_MESH_DEBUG_TRANS) |
| #define LOG_MODULE_NAME bt_mesh_transport |
| #include "common/log.h" |
| |
| #include "host/testing.h" |
| |
| #include "crypto.h" |
| #include "adv.h" |
| #include "mesh.h" |
| #include "net.h" |
| #include "lpn.h" |
| #include "friend.h" |
| #include "access.h" |
| #include "foundation.h" |
| #include "settings.h" |
| #include "transport.h" |
| |
| /* The transport layer needs at least three buffers for itself to avoid |
| * deadlocks. Ensure that there are a sufficient number of advertising |
| * buffers available compared to the maximum supported outgoing segment |
| * count. |
| */ |
| BUILD_ASSERT(CONFIG_BT_MESH_ADV_BUF_COUNT >= (CONFIG_BT_MESH_TX_SEG_MAX + 3)); |
| |
| #define AID_MASK ((u8_t)(BIT_MASK(6))) |
| |
| #define SEG(data) ((data)[0] >> 7) |
| #define AKF(data) (((data)[0] >> 6) & 0x01) |
| #define AID(data) ((data)[0] & AID_MASK) |
| #define ASZMIC(data) (((data)[1] >> 7) & 1) |
| |
| #define APP_MIC_LEN(aszmic) ((aszmic) ? 8 : 4) |
| |
| #define UNSEG_HDR(akf, aid) ((akf << 6) | (aid & AID_MASK)) |
| #define SEG_HDR(akf, aid) (UNSEG_HDR(akf, aid) | 0x80) |
| |
| #define BLOCK_COMPLETE(seg_n) (u32_t)(((u64_t)1 << (seg_n + 1)) - 1) |
| |
| #define SEQ_AUTH(iv_index, seq) (((u64_t)iv_index) << 24 | (u64_t)seq) |
| |
| /* Number of retransmit attempts (after the initial transmit) per segment */ |
| #define SEG_RETRANSMIT_ATTEMPTS 4 |
| |
| /* "This timer shall be set to a minimum of 200 + 50 * TTL milliseconds.". |
| * We use 400 since 300 is a common send duration for standard HCI, and we |
| * need to have a timeout that's bigger than that. |
| */ |
| #define SEG_RETRANSMIT_TIMEOUT(tx) (K_MSEC(400) + 50 * (tx)->ttl) |
| |
| /* How long to wait for available buffers before giving up */ |
| #define BUF_TIMEOUT K_NO_WAIT |
| |
| static struct seg_tx { |
| struct bt_mesh_subnet *sub; |
| struct net_buf *seg[CONFIG_BT_MESH_TX_SEG_MAX]; |
| u64_t seq_auth; |
| u16_t dst; |
| u8_t seg_n:5, /* Last segment index */ |
| new_key:1; /* New/old key */ |
| u8_t nack_count; /* Number of unacked segs */ |
| u8_t ttl; |
| const struct bt_mesh_send_cb *cb; |
| void *cb_data; |
| struct k_delayed_work retransmit; /* Retransmit timer */ |
| } seg_tx[CONFIG_BT_MESH_TX_SEG_MSG_COUNT]; |
| |
| static struct seg_rx { |
| struct bt_mesh_subnet *sub; |
| u64_t seq_auth; |
| u8_t seg_n:5, |
| ctl:1, |
| in_use:1, |
| obo:1; |
| u8_t hdr; |
| u8_t ttl; |
| u16_t src; |
| u16_t dst; |
| u32_t block; |
| u32_t last; |
| struct k_delayed_work ack; |
| struct net_buf_simple buf; |
| } seg_rx[CONFIG_BT_MESH_RX_SEG_MSG_COUNT] = { |
| [0 ... (CONFIG_BT_MESH_RX_SEG_MSG_COUNT - 1)] = { |
| .buf.size = CONFIG_BT_MESH_RX_SDU_MAX, |
| }, |
| }; |
| |
| static u8_t __noinit seg_rx_buf_data[(CONFIG_BT_MESH_RX_SEG_MSG_COUNT * |
| CONFIG_BT_MESH_RX_SDU_MAX)]; |
| |
| static u16_t hb_sub_dst = BT_MESH_ADDR_UNASSIGNED; |
| |
| void bt_mesh_set_hb_sub_dst(u16_t addr) |
| { |
| hb_sub_dst = addr; |
| } |
| |
| static int send_unseg(struct bt_mesh_net_tx *tx, struct net_buf_simple *sdu, |
| const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| struct net_buf *buf; |
| |
| BT_DBG("src 0x%04x dst 0x%04x app_idx 0x%04x sdu_len %u", |
| tx->src, tx->ctx->addr, tx->ctx->app_idx, sdu->len); |
| |
| buf = bt_mesh_adv_create(BT_MESH_ADV_DATA, tx->xmit, BUF_TIMEOUT); |
| if (!buf) { |
| BT_ERR("Out of network buffers"); |
| return -ENOBUFS; |
| } |
| |
| net_buf_reserve(buf, BT_MESH_NET_HDR_LEN); |
| |
| if (BT_MESH_IS_DEV_KEY(tx->ctx->app_idx)) { |
| net_buf_add_u8(buf, UNSEG_HDR(0, 0)); |
| } else { |
| net_buf_add_u8(buf, UNSEG_HDR(1, tx->aid)); |
| } |
| |
| net_buf_add_mem(buf, sdu->data, sdu->len); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND)) { |
| if (!bt_mesh_friend_queue_has_space(tx->sub->net_idx, |
| tx->src, tx->ctx->addr, |
| NULL, 1)) { |
| if (BT_MESH_ADDR_IS_UNICAST(tx->ctx->addr)) { |
| BT_ERR("Not enough space in Friend Queue"); |
| net_buf_unref(buf); |
| return -ENOBUFS; |
| } else { |
| BT_WARN("No space in Friend Queue"); |
| goto send; |
| } |
| } |
| |
| if (bt_mesh_friend_enqueue_tx(tx, BT_MESH_FRIEND_PDU_SINGLE, |
| NULL, 1, &buf->b) && |
| BT_MESH_ADDR_IS_UNICAST(tx->ctx->addr)) { |
| /* PDUs for a specific Friend should only go |
| * out through the Friend Queue. |
| */ |
| net_buf_unref(buf); |
| send_cb_finalize(cb, cb_data); |
| return 0; |
| } |
| } |
| |
| send: |
| return bt_mesh_net_send(tx, buf, cb, cb_data); |
| } |
| |
| bool bt_mesh_tx_in_progress(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(seg_tx); i++) { |
| if (seg_tx[i].nack_count) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static void seg_tx_reset(struct seg_tx *tx) |
| { |
| int i; |
| |
| k_delayed_work_cancel(&tx->retransmit); |
| |
| tx->cb = NULL; |
| tx->cb_data = NULL; |
| tx->seq_auth = 0U; |
| tx->sub = NULL; |
| tx->dst = BT_MESH_ADDR_UNASSIGNED; |
| |
| if (!tx->nack_count) { |
| return; |
| } |
| |
| for (i = 0; i <= tx->seg_n; i++) { |
| if (!tx->seg[i]) { |
| continue; |
| } |
| |
| BT_MESH_ADV(tx->seg[i])->busy = 0U; |
| net_buf_unref(tx->seg[i]); |
| tx->seg[i] = NULL; |
| } |
| |
| tx->nack_count = 0U; |
| |
| if (atomic_test_and_clear_bit(bt_mesh.flags, BT_MESH_IVU_PENDING)) { |
| BT_DBG("Proceeding with pending IV Update"); |
| /* bt_mesh_net_iv_update() will re-enable the flag if this |
| * wasn't the only transfer. |
| */ |
| if (bt_mesh_net_iv_update(bt_mesh.iv_index, false)) { |
| bt_mesh_net_sec_update(NULL); |
| } |
| } |
| } |
| |
| static inline void seg_tx_complete(struct seg_tx *tx, int err) |
| { |
| if (tx->cb && tx->cb->end) { |
| tx->cb->end(err, tx->cb_data); |
| } |
| |
| seg_tx_reset(tx); |
| } |
| |
| static void seg_first_send_start(u16_t duration, int err, void *user_data) |
| { |
| struct seg_tx *tx = user_data; |
| |
| if (tx->cb && tx->cb->start) { |
| tx->cb->start(duration, err, tx->cb_data); |
| } |
| } |
| |
| static void seg_send_start(u16_t duration, int err, void *user_data) |
| { |
| struct seg_tx *tx = user_data; |
| |
| /* If there's an error in transmitting the 'sent' callback will never |
| * be called. Make sure that we kick the retransmit timer also in this |
| * case since otherwise we risk the transmission of becoming stale. |
| */ |
| if (err) { |
| k_delayed_work_submit(&tx->retransmit, |
| SEG_RETRANSMIT_TIMEOUT(tx)); |
| } |
| } |
| |
| static void seg_sent(int err, void *user_data) |
| { |
| struct seg_tx *tx = user_data; |
| |
| k_delayed_work_submit(&tx->retransmit, |
| SEG_RETRANSMIT_TIMEOUT(tx)); |
| } |
| |
| static const struct bt_mesh_send_cb first_sent_cb = { |
| .start = seg_first_send_start, |
| .end = seg_sent, |
| }; |
| |
| static const struct bt_mesh_send_cb seg_sent_cb = { |
| .start = seg_send_start, |
| .end = seg_sent, |
| }; |
| |
| static void seg_tx_send_unacked(struct seg_tx *tx) |
| { |
| int i, err; |
| |
| for (i = 0; i <= tx->seg_n; i++) { |
| struct net_buf *seg = tx->seg[i]; |
| |
| if (!seg) { |
| continue; |
| } |
| |
| if (BT_MESH_ADV(seg)->busy) { |
| BT_DBG("Skipping segment that's still advertising"); |
| continue; |
| } |
| |
| if (!(BT_MESH_ADV(seg)->seg.attempts--)) { |
| BT_ERR("Ran out of retransmit attempts"); |
| seg_tx_complete(tx, -ETIMEDOUT); |
| return; |
| } |
| |
| BT_DBG("resending %u/%u", i, tx->seg_n); |
| |
| err = bt_mesh_net_resend(tx->sub, seg, tx->new_key, |
| &seg_sent_cb, tx); |
| if (err) { |
| BT_ERR("Sending segment failed"); |
| seg_tx_complete(tx, -EIO); |
| return; |
| } |
| } |
| } |
| |
| static void seg_retransmit(struct k_work *work) |
| { |
| struct seg_tx *tx = CONTAINER_OF(work, struct seg_tx, retransmit); |
| |
| seg_tx_send_unacked(tx); |
| } |
| |
| static int send_seg(struct bt_mesh_net_tx *net_tx, struct net_buf_simple *sdu, |
| const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| u8_t seg_hdr, seg_o; |
| u16_t seq_zero; |
| struct seg_tx *tx; |
| int i; |
| |
| BT_DBG("src 0x%04x dst 0x%04x app_idx 0x%04x aszmic %u sdu_len %u", |
| net_tx->src, net_tx->ctx->addr, net_tx->ctx->app_idx, |
| net_tx->aszmic, sdu->len); |
| |
| if (sdu->len < 1) { |
| BT_ERR("Zero-length SDU not allowed"); |
| return -EINVAL; |
| } |
| |
| if (sdu->len > BT_MESH_TX_SDU_MAX) { |
| BT_ERR("Not enough segment buffers for length %u", sdu->len); |
| return -EMSGSIZE; |
| } |
| |
| for (tx = NULL, i = 0; i < ARRAY_SIZE(seg_tx); i++) { |
| if (!seg_tx[i].nack_count) { |
| tx = &seg_tx[i]; |
| break; |
| } |
| } |
| |
| if (!tx) { |
| BT_ERR("No multi-segment message contexts available"); |
| return -EBUSY; |
| } |
| |
| if (BT_MESH_IS_DEV_KEY(net_tx->ctx->app_idx)) { |
| seg_hdr = SEG_HDR(0, 0); |
| } else { |
| seg_hdr = SEG_HDR(1, net_tx->aid); |
| } |
| |
| seg_o = 0U; |
| tx->dst = net_tx->ctx->addr; |
| tx->seg_n = (sdu->len - 1) / 12U; |
| tx->nack_count = tx->seg_n + 1; |
| tx->seq_auth = SEQ_AUTH(BT_MESH_NET_IVI_TX, bt_mesh.seq); |
| tx->sub = net_tx->sub; |
| tx->new_key = net_tx->sub->kr_flag; |
| tx->cb = cb; |
| tx->cb_data = cb_data; |
| |
| if (net_tx->ctx->send_ttl == BT_MESH_TTL_DEFAULT) { |
| tx->ttl = bt_mesh_default_ttl_get(); |
| } else { |
| tx->ttl = net_tx->ctx->send_ttl; |
| } |
| |
| seq_zero = tx->seq_auth & TRANS_SEQ_ZERO_MASK; |
| |
| BT_DBG("SeqZero 0x%04x", seq_zero); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && |
| !bt_mesh_friend_queue_has_space(tx->sub->net_idx, net_tx->src, |
| tx->dst, &tx->seq_auth, |
| tx->seg_n + 1) && |
| BT_MESH_ADDR_IS_UNICAST(tx->dst)) { |
| BT_ERR("Not enough space in Friend Queue for %u segments", |
| tx->seg_n + 1); |
| seg_tx_reset(tx); |
| return -ENOBUFS; |
| } |
| |
| for (seg_o = 0U; sdu->len; seg_o++) { |
| struct net_buf *seg; |
| u16_t len; |
| int err; |
| |
| seg = bt_mesh_adv_create(BT_MESH_ADV_DATA, net_tx->xmit, |
| BUF_TIMEOUT); |
| if (!seg) { |
| BT_ERR("Out of segment buffers"); |
| seg_tx_reset(tx); |
| return -ENOBUFS; |
| } |
| |
| BT_MESH_ADV(seg)->seg.attempts = SEG_RETRANSMIT_ATTEMPTS; |
| |
| net_buf_reserve(seg, BT_MESH_NET_HDR_LEN); |
| |
| net_buf_add_u8(seg, seg_hdr); |
| net_buf_add_u8(seg, (net_tx->aszmic << 7) | seq_zero >> 6); |
| net_buf_add_u8(seg, (((seq_zero & 0x3f) << 2) | |
| (seg_o >> 3))); |
| net_buf_add_u8(seg, ((seg_o & 0x07) << 5) | tx->seg_n); |
| |
| len = MIN(sdu->len, 12); |
| net_buf_add_mem(seg, sdu->data, len); |
| net_buf_simple_pull(sdu, len); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND)) { |
| enum bt_mesh_friend_pdu_type type; |
| |
| if (seg_o == tx->seg_n) { |
| type = BT_MESH_FRIEND_PDU_COMPLETE; |
| } else { |
| type = BT_MESH_FRIEND_PDU_PARTIAL; |
| } |
| |
| if (bt_mesh_friend_enqueue_tx(net_tx, type, |
| &tx->seq_auth, |
| tx->seg_n + 1, |
| &seg->b) && |
| BT_MESH_ADDR_IS_UNICAST(net_tx->ctx->addr)) { |
| /* PDUs for a specific Friend should only go |
| * out through the Friend Queue. |
| */ |
| net_buf_unref(seg); |
| continue; |
| } |
| } |
| |
| tx->seg[seg_o] = net_buf_ref(seg); |
| |
| BT_DBG("Sending %u/%u", seg_o, tx->seg_n); |
| |
| err = bt_mesh_net_send(net_tx, seg, |
| seg_o ? &seg_sent_cb : &first_sent_cb, |
| tx); |
| if (err) { |
| BT_ERR("Sending segment failed"); |
| seg_tx_reset(tx); |
| return err; |
| } |
| } |
| |
| /* This can happen if segments only went into the Friend Queue */ |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && !tx->seg[0]) { |
| seg_tx_reset(tx); |
| |
| /* If there was a callback notify sending immediately since |
| * there's no other way to track this (at least currently) |
| * with the Friend Queue. |
| */ |
| send_cb_finalize(cb, cb_data); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_LOW_POWER) && |
| bt_mesh_lpn_established()) { |
| bt_mesh_lpn_poll(); |
| } |
| |
| return 0; |
| } |
| |
| struct bt_mesh_app_key *bt_mesh_app_key_find(u16_t app_idx) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bt_mesh.app_keys); i++) { |
| struct bt_mesh_app_key *key = &bt_mesh.app_keys[i]; |
| |
| if (key->net_idx != BT_MESH_KEY_UNUSED && |
| key->app_idx == app_idx) { |
| return key; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| int bt_mesh_trans_send(struct bt_mesh_net_tx *tx, struct net_buf_simple *msg, |
| const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| const u8_t *key; |
| u8_t *ad; |
| u8_t aid; |
| int err; |
| |
| if (net_buf_simple_tailroom(msg) < 4) { |
| BT_ERR("Insufficient tailroom for Transport MIC"); |
| return -EINVAL; |
| } |
| |
| if (msg->len > 11) { |
| tx->ctx->send_rel = true; |
| } |
| |
| BT_DBG("net_idx 0x%04x app_idx 0x%04x dst 0x%04x", tx->sub->net_idx, |
| tx->ctx->app_idx, tx->ctx->addr); |
| BT_DBG("len %u: %s", msg->len, bt_hex(msg->data, msg->len)); |
| |
| err = bt_mesh_app_key_get(tx->sub, tx->ctx->app_idx, |
| tx->ctx->addr, &key, &aid); |
| if (err) { |
| return err; |
| } |
| |
| tx->aid = aid; |
| |
| if (!tx->ctx->send_rel || net_buf_simple_tailroom(msg) < 8) { |
| tx->aszmic = 0U; |
| } else { |
| tx->aszmic = 1U; |
| } |
| |
| if (BT_MESH_ADDR_IS_VIRTUAL(tx->ctx->addr)) { |
| ad = bt_mesh_label_uuid_get(tx->ctx->addr); |
| } else { |
| ad = NULL; |
| } |
| |
| err = bt_mesh_app_encrypt(key, BT_MESH_IS_DEV_KEY(tx->ctx->app_idx), |
| tx->aszmic, msg, ad, tx->src, tx->ctx->addr, |
| bt_mesh.seq, BT_MESH_NET_IVI_TX); |
| if (err) { |
| return err; |
| } |
| |
| if (tx->ctx->send_rel) { |
| err = send_seg(tx, msg, cb, cb_data); |
| } else { |
| err = send_unseg(tx, msg, cb, cb_data); |
| } |
| |
| return err; |
| } |
| |
| static void update_rpl(struct bt_mesh_rpl *rpl, struct bt_mesh_net_rx *rx) |
| { |
| rpl->src = rx->ctx.addr; |
| rpl->seq = rx->seq; |
| rpl->old_iv = rx->old_iv; |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| bt_mesh_store_rpl(rpl); |
| } |
| } |
| |
| /* Check the Replay Protection List for a replay attempt. If non-NULL match |
| * parameter is given the RPL slot is returned but it is not immediately |
| * updated (needed for segmented messages), whereas if a NULL match is given |
| * the RPL is immediately updated (used for unsegmented messages). |
| */ |
| static bool is_replay(struct bt_mesh_net_rx *rx, struct bt_mesh_rpl **match) |
| { |
| int i; |
| |
| /* Don't bother checking messages from ourselves */ |
| if (rx->net_if == BT_MESH_NET_IF_LOCAL) { |
| return false; |
| } |
| |
| /* The RPL is used only for the local node */ |
| if (!rx->local_match) { |
| return false; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(bt_mesh.rpl); i++) { |
| struct bt_mesh_rpl *rpl = &bt_mesh.rpl[i]; |
| |
| /* Empty slot */ |
| if (!rpl->src) { |
| if (match) { |
| *match = rpl; |
| } else { |
| update_rpl(rpl, rx); |
| } |
| |
| return false; |
| } |
| |
| /* Existing slot for given address */ |
| if (rpl->src == rx->ctx.addr) { |
| if (rx->old_iv && !rpl->old_iv) { |
| return true; |
| } |
| |
| if ((!rx->old_iv && rpl->old_iv) || |
| rpl->seq < rx->seq) { |
| if (match) { |
| *match = rpl; |
| } else { |
| update_rpl(rpl, rx); |
| } |
| |
| return false; |
| } else { |
| return true; |
| } |
| } |
| } |
| |
| BT_ERR("RPL is full!"); |
| return true; |
| } |
| |
| static int sdu_recv(struct bt_mesh_net_rx *rx, u32_t seq, u8_t hdr, |
| u8_t aszmic, struct net_buf_simple *buf) |
| { |
| NET_BUF_SIMPLE_DEFINE(sdu, CONFIG_BT_MESH_RX_SDU_MAX - 4); |
| u8_t *ad; |
| u16_t i; |
| int err; |
| |
| BT_DBG("ASZMIC %u AKF %u AID 0x%02x", aszmic, AKF(&hdr), AID(&hdr)); |
| BT_DBG("len %u: %s", buf->len, bt_hex(buf->data, buf->len)); |
| |
| if (buf->len < 1 + APP_MIC_LEN(aszmic)) { |
| BT_ERR("Too short SDU + MIC"); |
| return -EINVAL; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && !rx->local_match) { |
| BT_DBG("Ignoring PDU for LPN 0x%04x of this Friend", |
| rx->ctx.recv_dst); |
| return 0; |
| } |
| |
| if (BT_MESH_ADDR_IS_VIRTUAL(rx->ctx.recv_dst)) { |
| ad = bt_mesh_label_uuid_get(rx->ctx.recv_dst); |
| } else { |
| ad = NULL; |
| } |
| |
| /* Adjust the length to not contain the MIC at the end */ |
| buf->len -= APP_MIC_LEN(aszmic); |
| |
| if (!AKF(&hdr)) { |
| err = bt_mesh_app_decrypt(bt_mesh.dev_key, true, aszmic, buf, |
| &sdu, ad, rx->ctx.addr, |
| rx->ctx.recv_dst, seq, |
| BT_MESH_NET_IVI_RX(rx)); |
| if (err) { |
| BT_WARN("Unable to decrypt with local DevKey"); |
| } else { |
| rx->ctx.app_idx = BT_MESH_KEY_DEV_LOCAL; |
| bt_mesh_model_recv(rx, &sdu); |
| return 0; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PROVISIONER)) { |
| struct bt_mesh_cdb_node *node; |
| |
| /* |
| * There is no way of knowing if we should use our |
| * local DevKey or the remote DevKey to decrypt the |
| * message so we must try both. |
| */ |
| |
| node = bt_mesh_cdb_node_get(rx->ctx.addr); |
| if (node == NULL) { |
| BT_ERR("No node found for addr 0x%04x", |
| rx->ctx.addr); |
| return -EINVAL; |
| } |
| |
| net_buf_simple_reset(&sdu); |
| err = bt_mesh_app_decrypt(node->dev_key, true, aszmic, |
| buf, &sdu, ad, rx->ctx.addr, |
| rx->ctx.recv_dst, seq, |
| BT_MESH_NET_IVI_RX(rx)); |
| if (err) { |
| BT_ERR("Unable to decrypt with node DevKey"); |
| return -EINVAL; |
| } |
| |
| rx->ctx.app_idx = BT_MESH_KEY_DEV_REMOTE; |
| bt_mesh_model_recv(rx, &sdu); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| for (i = 0U; i < ARRAY_SIZE(bt_mesh.app_keys); i++) { |
| struct bt_mesh_app_key *key = &bt_mesh.app_keys[i]; |
| struct bt_mesh_app_keys *keys; |
| |
| /* Check that this AppKey matches received net_idx */ |
| if (key->net_idx != rx->sub->net_idx) { |
| continue; |
| } |
| |
| if (rx->new_key && key->updated) { |
| keys = &key->keys[1]; |
| } else { |
| keys = &key->keys[0]; |
| } |
| |
| /* Check that the AppKey ID matches */ |
| if (AID(&hdr) != keys->id) { |
| continue; |
| } |
| |
| net_buf_simple_reset(&sdu); |
| err = bt_mesh_app_decrypt(keys->val, false, aszmic, buf, |
| &sdu, ad, rx->ctx.addr, |
| rx->ctx.recv_dst, seq, |
| BT_MESH_NET_IVI_RX(rx)); |
| if (err) { |
| BT_WARN("Unable to decrypt with AppKey 0x%03x", |
| key->app_idx); |
| continue; |
| |
| } |
| |
| rx->ctx.app_idx = key->app_idx; |
| |
| bt_mesh_model_recv(rx, &sdu); |
| return 0; |
| } |
| |
| BT_WARN("No matching AppKey"); |
| |
| return -EINVAL; |
| } |
| |
| static struct seg_tx *seg_tx_lookup(u16_t seq_zero, u8_t obo, u16_t addr) |
| { |
| struct seg_tx *tx; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(seg_tx); i++) { |
| tx = &seg_tx[i]; |
| |
| if ((tx->seq_auth & TRANS_SEQ_ZERO_MASK) != seq_zero) { |
| continue; |
| } |
| |
| if (tx->dst == addr) { |
| return tx; |
| } |
| |
| /* If the expected remote address doesn't match, |
| * but the OBO flag is set and this is the first |
| * acknowledgement, assume it's a Friend that's |
| * responding and therefore accept the message. |
| */ |
| if (obo && tx->nack_count == tx->seg_n + 1) { |
| tx->dst = addr; |
| return tx; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static int trans_ack(struct bt_mesh_net_rx *rx, u8_t hdr, |
| struct net_buf_simple *buf, u64_t *seq_auth) |
| { |
| struct seg_tx *tx; |
| unsigned int bit; |
| u32_t ack; |
| u16_t seq_zero; |
| u8_t obo; |
| |
| if (buf->len < 6) { |
| BT_ERR("Too short ack message"); |
| return -EINVAL; |
| } |
| |
| seq_zero = net_buf_simple_pull_be16(buf); |
| obo = seq_zero >> 15; |
| seq_zero = (seq_zero >> 2) & TRANS_SEQ_ZERO_MASK; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && rx->friend_match) { |
| BT_DBG("Ack for LPN 0x%04x of this Friend", rx->ctx.recv_dst); |
| /* Best effort - we don't have enough info for true SeqAuth */ |
| *seq_auth = SEQ_AUTH(BT_MESH_NET_IVI_RX(rx), seq_zero); |
| return 0; |
| } |
| |
| ack = net_buf_simple_pull_be32(buf); |
| |
| BT_DBG("OBO %u seq_zero 0x%04x ack 0x%08x", obo, seq_zero, ack); |
| |
| tx = seg_tx_lookup(seq_zero, obo, rx->ctx.addr); |
| if (!tx) { |
| BT_WARN("No matching TX context for ack"); |
| return -EINVAL; |
| } |
| |
| *seq_auth = tx->seq_auth; |
| |
| if (!ack) { |
| BT_WARN("SDU canceled"); |
| seg_tx_complete(tx, -ECANCELED); |
| return 0; |
| } |
| |
| if (find_msb_set(ack) - 1 > tx->seg_n) { |
| BT_ERR("Too large segment number in ack"); |
| return -EINVAL; |
| } |
| |
| k_delayed_work_cancel(&tx->retransmit); |
| |
| while ((bit = find_lsb_set(ack))) { |
| if (tx->seg[bit - 1]) { |
| BT_DBG("seg %u/%u acked", bit - 1, tx->seg_n); |
| net_buf_unref(tx->seg[bit - 1]); |
| tx->seg[bit - 1] = NULL; |
| tx->nack_count--; |
| } |
| |
| ack &= ~BIT(bit - 1); |
| } |
| |
| if (tx->nack_count) { |
| seg_tx_send_unacked(tx); |
| } else { |
| BT_DBG("SDU TX complete"); |
| seg_tx_complete(tx, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int trans_heartbeat(struct bt_mesh_net_rx *rx, |
| struct net_buf_simple *buf) |
| { |
| u8_t init_ttl, hops; |
| u16_t feat; |
| |
| if (buf->len < 3) { |
| BT_ERR("Too short heartbeat message"); |
| return -EINVAL; |
| } |
| |
| if (rx->ctx.recv_dst != hb_sub_dst) { |
| BT_WARN("Ignoring heartbeat to non-subscribed destination"); |
| return 0; |
| } |
| |
| init_ttl = (net_buf_simple_pull_u8(buf) & 0x7f); |
| feat = net_buf_simple_pull_be16(buf); |
| |
| hops = (init_ttl - rx->ctx.recv_ttl + 1); |
| |
| BT_DBG("src 0x%04x TTL %u InitTTL %u (%u hop%s) feat 0x%04x", |
| rx->ctx.addr, rx->ctx.recv_ttl, init_ttl, hops, |
| (hops == 1U) ? "" : "s", feat); |
| |
| bt_mesh_heartbeat(rx->ctx.addr, rx->ctx.recv_dst, hops, feat); |
| |
| return 0; |
| } |
| |
| static int ctl_recv(struct bt_mesh_net_rx *rx, u8_t hdr, |
| struct net_buf_simple *buf, u64_t *seq_auth) |
| { |
| u8_t ctl_op = TRANS_CTL_OP(&hdr); |
| |
| BT_DBG("OpCode 0x%02x len %u", ctl_op, buf->len); |
| |
| switch (ctl_op) { |
| case TRANS_CTL_OP_ACK: |
| return trans_ack(rx, hdr, buf, seq_auth); |
| case TRANS_CTL_OP_HEARTBEAT: |
| return trans_heartbeat(rx, buf); |
| } |
| |
| /* Only acks and heartbeats may need processing without local_match */ |
| if (!rx->local_match) { |
| return 0; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && !bt_mesh_lpn_established()) { |
| switch (ctl_op) { |
| case TRANS_CTL_OP_FRIEND_POLL: |
| return bt_mesh_friend_poll(rx, buf); |
| case TRANS_CTL_OP_FRIEND_REQ: |
| return bt_mesh_friend_req(rx, buf); |
| case TRANS_CTL_OP_FRIEND_CLEAR: |
| return bt_mesh_friend_clear(rx, buf); |
| case TRANS_CTL_OP_FRIEND_CLEAR_CFM: |
| return bt_mesh_friend_clear_cfm(rx, buf); |
| case TRANS_CTL_OP_FRIEND_SUB_ADD: |
| return bt_mesh_friend_sub_add(rx, buf); |
| case TRANS_CTL_OP_FRIEND_SUB_REM: |
| return bt_mesh_friend_sub_rem(rx, buf); |
| } |
| } |
| |
| #if defined(CONFIG_BT_MESH_LOW_POWER) |
| if (ctl_op == TRANS_CTL_OP_FRIEND_OFFER) { |
| return bt_mesh_lpn_friend_offer(rx, buf); |
| } |
| |
| if (rx->ctx.addr == bt_mesh.lpn.frnd) { |
| if (ctl_op == TRANS_CTL_OP_FRIEND_CLEAR_CFM) { |
| return bt_mesh_lpn_friend_clear_cfm(rx, buf); |
| } |
| |
| if (!rx->friend_cred) { |
| BT_WARN("Message from friend with wrong credentials"); |
| return -EINVAL; |
| } |
| |
| switch (ctl_op) { |
| case TRANS_CTL_OP_FRIEND_UPDATE: |
| return bt_mesh_lpn_friend_update(rx, buf); |
| case TRANS_CTL_OP_FRIEND_SUB_CFM: |
| return bt_mesh_lpn_friend_sub_cfm(rx, buf); |
| } |
| } |
| #endif /* CONFIG_BT_MESH_LOW_POWER */ |
| |
| BT_WARN("Unhandled TransOpCode 0x%02x", ctl_op); |
| |
| return -ENOENT; |
| } |
| |
| static int trans_unseg(struct net_buf_simple *buf, struct bt_mesh_net_rx *rx, |
| u64_t *seq_auth) |
| { |
| u8_t hdr; |
| |
| BT_DBG("AFK %u AID 0x%02x", AKF(buf->data), AID(buf->data)); |
| |
| if (buf->len < 1) { |
| BT_ERR("Too small unsegmented PDU"); |
| return -EINVAL; |
| } |
| |
| if (is_replay(rx, NULL)) { |
| BT_WARN("Replay: src 0x%04x dst 0x%04x seq 0x%06x", |
| rx->ctx.addr, rx->ctx.recv_dst, rx->seq); |
| return -EINVAL; |
| } |
| |
| hdr = net_buf_simple_pull_u8(buf); |
| |
| if (rx->ctl) { |
| return ctl_recv(rx, hdr, buf, seq_auth); |
| } else { |
| /* SDUs must match a local element or an LPN of this Friend. */ |
| if (!rx->local_match && !rx->friend_match) { |
| return 0; |
| } |
| |
| return sdu_recv(rx, rx->seq, hdr, 0, buf); |
| } |
| } |
| |
| static inline s32_t ack_timeout(struct seg_rx *rx) |
| { |
| s32_t to; |
| u8_t ttl; |
| |
| if (rx->ttl == BT_MESH_TTL_DEFAULT) { |
| ttl = bt_mesh_default_ttl_get(); |
| } else { |
| ttl = rx->ttl; |
| } |
| |
| /* The acknowledgment timer shall be set to a minimum of |
| * 150 + 50 * TTL milliseconds. |
| */ |
| to = K_MSEC(150 + (ttl * 50U)); |
| |
| /* 100 ms for every not yet received segment */ |
| to += K_MSEC(((rx->seg_n + 1) - popcount(rx->block)) * 100U); |
| |
| /* Make sure we don't send more frequently than the duration for |
| * each packet (default is 300ms). |
| */ |
| return MAX(to, K_MSEC(400)); |
| } |
| |
| static int ctl_send_unseg(struct bt_mesh_net_tx *tx, u8_t ctl_op, void *data, |
| size_t data_len, u64_t *seq_auth, |
| const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| struct net_buf *buf; |
| |
| buf = bt_mesh_adv_create(BT_MESH_ADV_DATA, tx->xmit, BUF_TIMEOUT); |
| if (!buf) { |
| BT_ERR("Out of transport buffers"); |
| return -ENOBUFS; |
| } |
| |
| net_buf_reserve(buf, BT_MESH_NET_HDR_LEN); |
| |
| net_buf_add_u8(buf, TRANS_CTL_HDR(ctl_op, 0)); |
| |
| net_buf_add_mem(buf, data, data_len); |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND)) { |
| if (bt_mesh_friend_enqueue_tx(tx, BT_MESH_FRIEND_PDU_SINGLE, |
| seq_auth, 1, &buf->b) && |
| BT_MESH_ADDR_IS_UNICAST(tx->ctx->addr)) { |
| /* PDUs for a specific Friend should only go |
| * out through the Friend Queue. |
| */ |
| net_buf_unref(buf); |
| return 0; |
| } |
| } |
| |
| return bt_mesh_net_send(tx, buf, cb, cb_data); |
| } |
| |
| static int ctl_send_seg(struct bt_mesh_net_tx *tx, u8_t ctl_op, |
| void *data, size_t data_len, u64_t *seq_auth, |
| const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| u8_t seg_o = 0; |
| u16_t seq_zero; |
| struct seg_tx *tx_seg; |
| int i; |
| u16_t unsent = data_len; |
| |
| for (tx_seg = NULL, i = 0; i < ARRAY_SIZE(seg_tx); i++) { |
| if (!seg_tx[i].nack_count) { |
| tx_seg = &seg_tx[i]; |
| break; |
| } |
| } |
| |
| if (!tx_seg) { |
| BT_ERR("No multi-segment message contexts available"); |
| return -EBUSY; |
| } |
| |
| tx_seg->dst = tx->ctx->addr; |
| tx_seg->seg_n = (data_len - 1) / 8; |
| tx_seg->nack_count = tx_seg->seg_n + 1; |
| tx_seg->seq_auth = SEQ_AUTH(BT_MESH_NET_IVI_TX, bt_mesh.seq); |
| tx_seg->sub = tx->sub; |
| tx_seg->new_key = tx->sub->kr_flag; |
| tx_seg->cb = cb; |
| tx_seg->cb_data = cb_data; |
| |
| if (tx->ctx->send_ttl == BT_MESH_TTL_DEFAULT) { |
| tx_seg->ttl = bt_mesh_default_ttl_get(); |
| } else { |
| tx_seg->ttl = tx->ctx->send_ttl; |
| } |
| |
| seq_zero = tx_seg->seq_auth & TRANS_SEQ_ZERO_MASK; |
| |
| for (seg_o = 0; seg_o <= tx_seg->seg_n; seg_o++) { |
| struct net_buf *seg; |
| u16_t len; |
| int err; |
| |
| seg = bt_mesh_adv_create(BT_MESH_ADV_DATA, tx->xmit, |
| BUF_TIMEOUT); |
| if (!seg) { |
| BT_ERR("Out of segment buffers"); |
| seg_tx_reset(tx_seg); |
| return -ENOBUFS; |
| } |
| |
| BT_MESH_ADV(seg)->seg.attempts = SEG_RETRANSMIT_ATTEMPTS; |
| |
| net_buf_reserve(seg, BT_MESH_NET_HDR_LEN); |
| net_buf_add_u8(seg, TRANS_CTL_HDR(ctl_op, 1)); |
| net_buf_add_u8(seg, (tx->aszmic << 7) | seq_zero >> 6); |
| net_buf_add_u8(seg, (((seq_zero & 0x3f) << 2) | (seg_o >> 3))); |
| net_buf_add_u8(seg, ((seg_o & 0x07) << 5) | tx_seg->seg_n); |
| len = MIN(unsent, 8); |
| net_buf_add_mem(seg, (char *)data + (data_len - unsent), len); |
| unsent -= len; |
| tx_seg->seg[seg_o] = net_buf_ref(seg); |
| |
| BT_DBG("Sending %u/%u", seg_o, tx_seg->seg_n); |
| |
| err = bt_mesh_net_send(tx, seg, |
| seg_o ? &seg_sent_cb : &first_sent_cb, |
| tx_seg); |
| if (err) { |
| BT_ERR("Sending segment failed"); |
| seg_tx_reset(tx_seg); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int bt_mesh_ctl_send(struct bt_mesh_net_tx *tx, u8_t ctl_op, void *data, |
| size_t data_len, u64_t *seq_auth, |
| const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| BT_DBG("src 0x%04x dst 0x%04x ttl 0x%02x ctl 0x%02x", tx->src, |
| tx->ctx->addr, tx->ctx->send_ttl, ctl_op); |
| BT_DBG("len %zu: %s", data_len, bt_hex(data, data_len)); |
| |
| if (data_len <= 11) { |
| return ctl_send_unseg(tx, ctl_op, data, data_len, seq_auth, |
| cb, cb_data); |
| } else { |
| return ctl_send_seg(tx, ctl_op, data, data_len, seq_auth, |
| cb, cb_data); |
| } |
| } |
| |
| static int send_ack(struct bt_mesh_subnet *sub, u16_t src, u16_t dst, |
| u8_t ttl, u64_t *seq_auth, u32_t block, u8_t obo) |
| { |
| struct bt_mesh_msg_ctx ctx = { |
| .net_idx = sub->net_idx, |
| .app_idx = BT_MESH_KEY_UNUSED, |
| .addr = dst, |
| .send_ttl = ttl, |
| }; |
| struct bt_mesh_net_tx tx = { |
| .sub = sub, |
| .ctx = &ctx, |
| .src = obo ? bt_mesh_primary_addr() : src, |
| .xmit = bt_mesh_net_transmit_get(), |
| }; |
| u16_t seq_zero = *seq_auth & TRANS_SEQ_ZERO_MASK; |
| u8_t buf[6]; |
| |
| BT_DBG("SeqZero 0x%04x Block 0x%08x OBO %u", seq_zero, block, obo); |
| |
| if (bt_mesh_lpn_established()) { |
| BT_WARN("Not sending ack when LPN is enabled"); |
| return 0; |
| } |
| |
| /* This can happen if the segmented message was destined for a group |
| * or virtual address. |
| */ |
| if (!BT_MESH_ADDR_IS_UNICAST(src)) { |
| BT_WARN("Not sending ack for non-unicast address"); |
| return 0; |
| } |
| |
| sys_put_be16(((seq_zero << 2) & 0x7ffc) | (obo << 15), buf); |
| sys_put_be32(block, &buf[2]); |
| |
| return bt_mesh_ctl_send(&tx, TRANS_CTL_OP_ACK, buf, sizeof(buf), |
| NULL, NULL, NULL); |
| } |
| |
| static void seg_rx_reset(struct seg_rx *rx, bool full_reset) |
| { |
| BT_DBG("rx %p", rx); |
| |
| k_delayed_work_cancel(&rx->ack); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && rx->obo && |
| rx->block != BLOCK_COMPLETE(rx->seg_n)) { |
| BT_WARN("Clearing incomplete buffers from Friend queue"); |
| bt_mesh_friend_clear_incomplete(rx->sub, rx->src, rx->dst, |
| &rx->seq_auth); |
| } |
| |
| rx->in_use = 0U; |
| |
| /* We don't always reset these values since we need to be able to |
| * send an ack if we receive a segment after we've already received |
| * the full SDU. |
| */ |
| if (full_reset) { |
| rx->seq_auth = 0U; |
| rx->sub = NULL; |
| rx->src = BT_MESH_ADDR_UNASSIGNED; |
| rx->dst = BT_MESH_ADDR_UNASSIGNED; |
| } |
| } |
| |
| static void seg_ack(struct k_work *work) |
| { |
| struct seg_rx *rx = CONTAINER_OF(work, struct seg_rx, ack); |
| |
| BT_DBG("rx %p", rx); |
| |
| if (k_uptime_get_32() - rx->last > K_SECONDS(60)) { |
| BT_WARN("Incomplete timer expired"); |
| seg_rx_reset(rx, false); |
| |
| if (IS_ENABLED(CONFIG_BT_TESTING)) { |
| bt_test_mesh_trans_incomp_timer_exp(); |
| } |
| |
| return; |
| } |
| |
| send_ack(rx->sub, rx->dst, rx->src, rx->ttl, &rx->seq_auth, |
| rx->block, rx->obo); |
| |
| k_delayed_work_submit(&rx->ack, ack_timeout(rx)); |
| } |
| |
| static inline u8_t seg_len(bool ctl) |
| { |
| if (ctl) { |
| return 8; |
| } else { |
| return 12; |
| } |
| } |
| |
| static inline bool sdu_len_is_ok(bool ctl, u8_t seg_n) |
| { |
| return ((seg_n * seg_len(ctl) + 1) <= CONFIG_BT_MESH_RX_SDU_MAX); |
| } |
| |
| static struct seg_rx *seg_rx_find(struct bt_mesh_net_rx *net_rx, |
| const u64_t *seq_auth) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(seg_rx); i++) { |
| struct seg_rx *rx = &seg_rx[i]; |
| |
| if (rx->src != net_rx->ctx.addr || |
| rx->dst != net_rx->ctx.recv_dst) { |
| continue; |
| } |
| |
| /* Return newer RX context in addition to an exact match, so |
| * the calling function can properly discard an old SeqAuth. |
| */ |
| if (rx->seq_auth >= *seq_auth) { |
| return rx; |
| } |
| |
| if (rx->in_use) { |
| BT_WARN("Duplicate SDU from src 0x%04x", |
| net_rx->ctx.addr); |
| |
| /* Clear out the old context since the sender |
| * has apparently started sending a new SDU. |
| */ |
| seg_rx_reset(rx, true); |
| |
| /* Return non-match so caller can re-allocate */ |
| return NULL; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static bool seg_rx_is_valid(struct seg_rx *rx, struct bt_mesh_net_rx *net_rx, |
| const u8_t *hdr, u8_t seg_n) |
| { |
| if (rx->hdr != *hdr || rx->seg_n != seg_n) { |
| BT_ERR("Invalid segment for ongoing session"); |
| return false; |
| } |
| |
| if (rx->src != net_rx->ctx.addr || rx->dst != net_rx->ctx.recv_dst) { |
| BT_ERR("Invalid source or destination for segment"); |
| return false; |
| } |
| |
| if (rx->ctl != net_rx->ctl) { |
| BT_ERR("Inconsistent CTL in segment"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static struct seg_rx *seg_rx_alloc(struct bt_mesh_net_rx *net_rx, |
| const u8_t *hdr, const u64_t *seq_auth, |
| u8_t seg_n) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(seg_rx); i++) { |
| struct seg_rx *rx = &seg_rx[i]; |
| |
| if (rx->in_use) { |
| continue; |
| } |
| |
| rx->in_use = 1U; |
| net_buf_simple_reset(&rx->buf); |
| rx->sub = net_rx->sub; |
| rx->ctl = net_rx->ctl; |
| rx->seq_auth = *seq_auth; |
| rx->seg_n = seg_n; |
| rx->hdr = *hdr; |
| rx->ttl = net_rx->ctx.send_ttl; |
| rx->src = net_rx->ctx.addr; |
| rx->dst = net_rx->ctx.recv_dst; |
| rx->block = 0U; |
| |
| BT_DBG("New RX context. Block Complete 0x%08x", |
| BLOCK_COMPLETE(seg_n)); |
| |
| return rx; |
| } |
| |
| return NULL; |
| } |
| |
| static int trans_seg(struct net_buf_simple *buf, struct bt_mesh_net_rx *net_rx, |
| enum bt_mesh_friend_pdu_type *pdu_type, u64_t *seq_auth, |
| u8_t *seg_count) |
| { |
| struct bt_mesh_rpl *rpl = NULL; |
| struct seg_rx *rx; |
| u8_t *hdr = buf->data; |
| u16_t seq_zero; |
| u8_t seg_n; |
| u8_t seg_o; |
| int err; |
| |
| if (buf->len < 5) { |
| BT_ERR("Too short segmented message (len %u)", buf->len); |
| return -EINVAL; |
| } |
| |
| if (is_replay(net_rx, &rpl)) { |
| BT_WARN("Replay: src 0x%04x dst 0x%04x seq 0x%06x", |
| net_rx->ctx.addr, net_rx->ctx.recv_dst, net_rx->seq); |
| return -EINVAL; |
| } |
| |
| BT_DBG("ASZMIC %u AKF %u AID 0x%02x", ASZMIC(hdr), AKF(hdr), AID(hdr)); |
| |
| net_buf_simple_pull(buf, 1); |
| |
| seq_zero = net_buf_simple_pull_be16(buf); |
| seg_o = (seq_zero & 0x03) << 3; |
| seq_zero = (seq_zero >> 2) & TRANS_SEQ_ZERO_MASK; |
| seg_n = net_buf_simple_pull_u8(buf); |
| seg_o |= seg_n >> 5; |
| seg_n &= 0x1f; |
| |
| BT_DBG("SeqZero 0x%04x SegO %u SegN %u", seq_zero, seg_o, seg_n); |
| |
| if (seg_o > seg_n) { |
| BT_ERR("SegO greater than SegN (%u > %u)", seg_o, seg_n); |
| return -EINVAL; |
| } |
| |
| /* According to Mesh 1.0 specification: |
| * "The SeqAuth is composed of the IV Index and the sequence number |
| * (SEQ) of the first segment" |
| * |
| * Therefore we need to calculate very first SEQ in order to find |
| * seqAuth. We can calculate as below: |
| * |
| * SEQ(0) = SEQ(n) - (delta between seqZero and SEQ(n) by looking into |
| * 14 least significant bits of SEQ(n)) |
| * |
| * Mentioned delta shall be >= 0, if it is not then seq_auth will |
| * be broken and it will be verified by the code below. |
| */ |
| *seq_auth = SEQ_AUTH(BT_MESH_NET_IVI_RX(net_rx), |
| (net_rx->seq - |
| ((((net_rx->seq & BIT_MASK(14)) - seq_zero)) & |
| BIT_MASK(13)))); |
| |
| *seg_count = seg_n + 1; |
| |
| /* Look for old RX sessions */ |
| rx = seg_rx_find(net_rx, seq_auth); |
| if (rx) { |
| /* Discard old SeqAuth packet */ |
| if (rx->seq_auth > *seq_auth) { |
| BT_WARN("Ignoring old SeqAuth"); |
| return -EINVAL; |
| } |
| |
| if (!seg_rx_is_valid(rx, net_rx, hdr, seg_n)) { |
| return -EINVAL; |
| } |
| |
| if (rx->in_use) { |
| BT_DBG("Existing RX context. Block 0x%08x", rx->block); |
| goto found_rx; |
| } |
| |
| if (rx->block == BLOCK_COMPLETE(rx->seg_n)) { |
| BT_WARN("Got segment for already complete SDU"); |
| |
| send_ack(net_rx->sub, net_rx->ctx.recv_dst, |
| net_rx->ctx.addr, net_rx->ctx.send_ttl, |
| seq_auth, rx->block, rx->obo); |
| |
| if (rpl) { |
| update_rpl(rpl, net_rx); |
| } |
| |
| return -EALREADY; |
| } |
| |
| /* We ignore instead of sending block ack 0 since the |
| * ack timer is always smaller than the incomplete |
| * timer, i.e. the sender is misbehaving. |
| */ |
| BT_WARN("Got segment for canceled SDU"); |
| return -EINVAL; |
| } |
| |
| /* Bail out early if we're not ready to receive such a large SDU */ |
| if (!sdu_len_is_ok(net_rx->ctl, seg_n)) { |
| BT_ERR("Too big incoming SDU length"); |
| send_ack(net_rx->sub, net_rx->ctx.recv_dst, net_rx->ctx.addr, |
| net_rx->ctx.send_ttl, seq_auth, 0, |
| net_rx->friend_match); |
| return -EMSGSIZE; |
| } |
| |
| /* Verify early that there will be space in the Friend Queue(s) in |
| * case this message is destined to an LPN of ours. |
| */ |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && |
| net_rx->friend_match && !net_rx->local_match && |
| !bt_mesh_friend_queue_has_space(net_rx->sub->net_idx, |
| net_rx->ctx.addr, |
| net_rx->ctx.recv_dst, seq_auth, |
| *seg_count)) { |
| BT_ERR("No space in Friend Queue for %u segments", *seg_count); |
| send_ack(net_rx->sub, net_rx->ctx.recv_dst, net_rx->ctx.addr, |
| net_rx->ctx.send_ttl, seq_auth, 0, |
| net_rx->friend_match); |
| return -ENOBUFS; |
| } |
| |
| /* Look for free slot for a new RX session */ |
| rx = seg_rx_alloc(net_rx, hdr, seq_auth, seg_n); |
| if (!rx) { |
| /* Warn but don't cancel since the existing slots willl |
| * eventually be freed up and we'll be able to process |
| * this one. |
| */ |
| BT_WARN("No free slots for new incoming segmented messages"); |
| return -ENOMEM; |
| } |
| |
| rx->obo = net_rx->friend_match; |
| |
| found_rx: |
| if (BIT(seg_o) & rx->block) { |
| BT_WARN("Received already received fragment"); |
| return -EALREADY; |
| } |
| |
| /* All segments, except the last one, must either have 8 bytes of |
| * payload (for 64bit Net MIC) or 12 bytes of payload (for 32bit |
| * Net MIC). |
| */ |
| if (seg_o == seg_n) { |
| /* Set the expected final buffer length */ |
| rx->buf.len = seg_n * seg_len(rx->ctl) + buf->len; |
| BT_DBG("Target len %u * %u + %u = %u", seg_n, seg_len(rx->ctl), |
| buf->len, rx->buf.len); |
| |
| if (rx->buf.len > CONFIG_BT_MESH_RX_SDU_MAX) { |
| BT_ERR("Too large SDU len"); |
| send_ack(net_rx->sub, net_rx->ctx.recv_dst, |
| net_rx->ctx.addr, net_rx->ctx.send_ttl, |
| seq_auth, 0, rx->obo); |
| seg_rx_reset(rx, true); |
| return -EMSGSIZE; |
| } |
| } else { |
| if (buf->len != seg_len(rx->ctl)) { |
| BT_ERR("Incorrect segment size for message type"); |
| return -EINVAL; |
| } |
| } |
| |
| /* Reset the Incomplete Timer */ |
| rx->last = k_uptime_get_32(); |
| |
| if (!k_delayed_work_remaining_get(&rx->ack) && |
| !bt_mesh_lpn_established()) { |
| k_delayed_work_submit(&rx->ack, ack_timeout(rx)); |
| } |
| |
| /* Location in buffer can be calculated based on seg_o & rx->ctl */ |
| memcpy(rx->buf.data + (seg_o * seg_len(rx->ctl)), buf->data, buf->len); |
| |
| BT_DBG("Received %u/%u", seg_o, seg_n); |
| |
| /* Mark segment as received */ |
| rx->block |= BIT(seg_o); |
| |
| if (rx->block != BLOCK_COMPLETE(seg_n)) { |
| *pdu_type = BT_MESH_FRIEND_PDU_PARTIAL; |
| return 0; |
| } |
| |
| BT_DBG("Complete SDU"); |
| |
| if (rpl) { |
| update_rpl(rpl, net_rx); |
| } |
| |
| *pdu_type = BT_MESH_FRIEND_PDU_COMPLETE; |
| |
| k_delayed_work_cancel(&rx->ack); |
| send_ack(net_rx->sub, net_rx->ctx.recv_dst, net_rx->ctx.addr, |
| net_rx->ctx.send_ttl, seq_auth, rx->block, rx->obo); |
| |
| if (net_rx->ctl) { |
| err = ctl_recv(net_rx, *hdr, &rx->buf, seq_auth); |
| } else { |
| err = sdu_recv(net_rx, (rx->seq_auth & 0xffffff), *hdr, |
| ASZMIC(hdr), &rx->buf); |
| } |
| |
| seg_rx_reset(rx, false); |
| |
| return err; |
| } |
| |
| int bt_mesh_trans_recv(struct net_buf_simple *buf, struct bt_mesh_net_rx *rx) |
| { |
| u64_t seq_auth = TRANS_SEQ_AUTH_NVAL; |
| enum bt_mesh_friend_pdu_type pdu_type = BT_MESH_FRIEND_PDU_SINGLE; |
| struct net_buf_simple_state state; |
| u8_t seg_count = 0; |
| int err; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND)) { |
| rx->friend_match = bt_mesh_friend_match(rx->sub->net_idx, |
| rx->ctx.recv_dst); |
| } else { |
| rx->friend_match = false; |
| } |
| |
| BT_DBG("src 0x%04x dst 0x%04x seq 0x%08x friend_match %u", |
| rx->ctx.addr, rx->ctx.recv_dst, rx->seq, rx->friend_match); |
| |
| /* Remove network headers */ |
| net_buf_simple_pull(buf, BT_MESH_NET_HDR_LEN); |
| |
| BT_DBG("Payload %s", bt_hex(buf->data, buf->len)); |
| |
| if (IS_ENABLED(CONFIG_BT_TESTING)) { |
| bt_test_mesh_net_recv(rx->ctx.recv_ttl, rx->ctl, rx->ctx.addr, |
| rx->ctx.recv_dst, buf->data, buf->len); |
| } |
| |
| /* If LPN mode is enabled messages are only accepted when we've |
| * requested the Friend to send them. The messages must also |
| * be encrypted using the Friend Credentials. |
| */ |
| if (IS_ENABLED(CONFIG_BT_MESH_LOW_POWER) && |
| bt_mesh_lpn_established() && rx->net_if == BT_MESH_NET_IF_ADV && |
| (!bt_mesh_lpn_waiting_update() || !rx->friend_cred)) { |
| BT_WARN("Ignoring unexpected message in Low Power mode"); |
| return -EAGAIN; |
| } |
| |
| /* Save the app-level state so the buffer can later be placed in |
| * the Friend Queue. |
| */ |
| net_buf_simple_save(buf, &state); |
| |
| if (SEG(buf->data)) { |
| /* Segmented messages must match a local element or an |
| * LPN of this Friend. |
| */ |
| if (!rx->local_match && !rx->friend_match) { |
| return 0; |
| } |
| |
| err = trans_seg(buf, rx, &pdu_type, &seq_auth, &seg_count); |
| } else { |
| seg_count = 1; |
| err = trans_unseg(buf, rx, &seq_auth); |
| } |
| |
| /* Notify LPN state machine so a Friend Poll will be sent. If the |
| * message was a Friend Update it's possible that a Poll was already |
| * queued for sending, however that's fine since then the |
| * bt_mesh_lpn_waiting_update() function will return false: |
| * we still need to go through the actual sending to the bearer and |
| * wait for ReceiveDelay before transitioning to WAIT_UPDATE state. |
| * Another situation where we want to notify the LPN state machine |
| * is if it's configured to use an automatic Friendship establishment |
| * timer, in which case we want to reset the timer at this point. |
| * |
| */ |
| if (IS_ENABLED(CONFIG_BT_MESH_LOW_POWER) && |
| (bt_mesh_lpn_timer() || |
| (bt_mesh_lpn_established() && bt_mesh_lpn_waiting_update()))) { |
| bt_mesh_lpn_msg_received(rx); |
| } |
| |
| net_buf_simple_restore(buf, &state); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_FRIEND) && rx->friend_match && !err) { |
| if (seq_auth == TRANS_SEQ_AUTH_NVAL) { |
| bt_mesh_friend_enqueue_rx(rx, pdu_type, NULL, |
| seg_count, buf); |
| } else { |
| bt_mesh_friend_enqueue_rx(rx, pdu_type, &seq_auth, |
| seg_count, buf); |
| } |
| } |
| |
| return err; |
| } |
| |
| void bt_mesh_rx_reset(void) |
| { |
| int i; |
| |
| BT_DBG(""); |
| |
| for (i = 0; i < ARRAY_SIZE(seg_rx); i++) { |
| seg_rx_reset(&seg_rx[i], true); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| bt_mesh_clear_rpl(); |
| } else { |
| (void)memset(bt_mesh.rpl, 0, sizeof(bt_mesh.rpl)); |
| } |
| } |
| |
| void bt_mesh_tx_reset(void) |
| { |
| int i; |
| |
| BT_DBG(""); |
| |
| for (i = 0; i < ARRAY_SIZE(seg_tx); i++) { |
| seg_tx_reset(&seg_tx[i]); |
| } |
| } |
| |
| void bt_mesh_trans_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(seg_tx); i++) { |
| k_delayed_work_init(&seg_tx[i].retransmit, seg_retransmit); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(seg_rx); i++) { |
| k_delayed_work_init(&seg_rx[i].ack, seg_ack); |
| seg_rx[i].buf.__buf = (seg_rx_buf_data + |
| (i * CONFIG_BT_MESH_RX_SDU_MAX)); |
| seg_rx[i].buf.data = seg_rx[i].buf.__buf; |
| } |
| } |
| |
| void bt_mesh_rpl_clear(void) |
| { |
| BT_DBG(""); |
| (void)memset(bt_mesh.rpl, 0, sizeof(bt_mesh.rpl)); |
| } |
| |
| void bt_mesh_heartbeat_send(void) |
| { |
| struct bt_mesh_cfg_srv *cfg = bt_mesh_cfg_get(); |
| u16_t feat = 0U; |
| struct __packed { |
| u8_t init_ttl; |
| u16_t feat; |
| } hb; |
| struct bt_mesh_msg_ctx ctx = { |
| .net_idx = cfg->hb_pub.net_idx, |
| .app_idx = BT_MESH_KEY_UNUSED, |
| .addr = cfg->hb_pub.dst, |
| .send_ttl = cfg->hb_pub.ttl, |
| }; |
| struct bt_mesh_net_tx tx = { |
| .sub = bt_mesh_subnet_get(cfg->hb_pub.net_idx), |
| .ctx = &ctx, |
| .src = bt_mesh_model_elem(cfg->model)->addr, |
| .xmit = bt_mesh_net_transmit_get(), |
| }; |
| |
| /* Do nothing if heartbeat publication is not enabled */ |
| if (cfg->hb_pub.dst == BT_MESH_ADDR_UNASSIGNED) { |
| return; |
| } |
| |
| hb.init_ttl = cfg->hb_pub.ttl; |
| |
| if (bt_mesh_relay_get() == BT_MESH_RELAY_ENABLED) { |
| feat |= BT_MESH_FEAT_RELAY; |
| } |
| |
| if (bt_mesh_gatt_proxy_get() == BT_MESH_GATT_PROXY_ENABLED) { |
| feat |= BT_MESH_FEAT_PROXY; |
| } |
| |
| if (bt_mesh_friend_get() == BT_MESH_FRIEND_ENABLED) { |
| feat |= BT_MESH_FEAT_FRIEND; |
| } |
| |
| if (bt_mesh_lpn_established()) { |
| feat |= BT_MESH_FEAT_LOW_POWER; |
| } |
| |
| hb.feat = sys_cpu_to_be16(feat); |
| |
| BT_DBG("InitTTL %u feat 0x%04x", cfg->hb_pub.ttl, feat); |
| |
| bt_mesh_ctl_send(&tx, TRANS_CTL_OP_HEARTBEAT, &hb, sizeof(hb), |
| NULL, NULL, NULL); |
| } |
| |
| int bt_mesh_app_key_get(const struct bt_mesh_subnet *subnet, u16_t app_idx, |
| u16_t addr, const u8_t **key, u8_t *aid) |
| { |
| struct bt_mesh_app_key *app_key; |
| |
| if (app_idx == BT_MESH_KEY_DEV_LOCAL || |
| (app_idx == BT_MESH_KEY_DEV_REMOTE && |
| bt_mesh_elem_find(addr) != NULL)) { |
| *aid = 0; |
| *key = bt_mesh.dev_key; |
| return 0; |
| } else if (app_idx == BT_MESH_KEY_DEV_REMOTE) { |
| if (!IS_ENABLED(CONFIG_BT_MESH_CDB)) { |
| return -EINVAL; |
| } |
| |
| struct bt_mesh_cdb_node *node = bt_mesh_cdb_node_get(addr); |
| if (!node) { |
| return -EINVAL; |
| } |
| |
| *key = node->dev_key; |
| *aid = 0; |
| return 0; |
| } |
| |
| if (!subnet) { |
| return -EINVAL; |
| } |
| |
| app_key = bt_mesh_app_key_find(app_idx); |
| if (!app_key) { |
| return -ENOENT; |
| } |
| |
| if (subnet->kr_phase == BT_MESH_KR_PHASE_2 && app_key->updated) { |
| *key = app_key->keys[1].val; |
| *aid = app_key->keys[1].id; |
| } else { |
| *key = app_key->keys[0].val; |
| *aid = app_key->keys[0].id; |
| } |
| |
| return 0; |
| } |