blob: e9636cba7ccd82b3af406f6121c97a7c9f59b429 [file] [log] [blame]
# Copyright (c) 2020, Phytec Messtechnik GmbH
# SPDX-License-Identifier: Apache-2.0
description: GD7965 EPD display controller
compatible: "gooddisplay,gd7965"
include: spi-device.yaml
properties:
height:
type: int
required: true
description: Height in pixel of the panel driven by the controller
width:
type: int
required: true
description: Width in pixel of the panel driven by the controller
reset-gpios:
type: phandle-array
required: true
description: RESET pin.
The RESET pin of GD7965 is active low.
If connected directly the MCU pin should be configured
as active low.
dc-gpios:
type: phandle-array
required: true
description: DC pin.
The DC pin of GD7965 is active low (transmission command byte).
If connected directly the MCU pin should be configured
as active low.
busy-gpios:
type: phandle-array
required: true
description: BUSY pin.
The BUSY pin of GD7965 is active low.
If connected directly the MCU pin should be configured
as active low.
pwr:
type: uint8-array
required: true
description: Power Setting (PWR) values
softstart:
type: uint8-array
required: true
description: Booster Soft Start (BTST) values
cdi:
type: int
required: true
description: VCOM and data interval value
tcon:
type: int
required: true
description: TCON setting value