blob: 0fb175ed551c720b9f71cf226c166221dec1bbe1 [file] [log] [blame]
/*
* Copyright (c) 2017 Piotr Mienkowski
* Copyright (c) 2017 Justin Watson
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <arm/armv7-m.dtsi>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/gpio/gpio.h>
#include "same70-pinctrl.dtsi"
/ {
aliases {
watchdog0 = &wdt;
};
chosen {
zephyr,flash-controller = &eefc;
};
chosen {
zephyr,entropy = &trng;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-m7";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
mpu: mpu@e000ed90 {
compatible = "arm,armv7m-mpu";
reg = <0xe000ed90 0x40>;
arm,num-mpu-regions = <16>;
};
};
};
sram0: memory@20400000 {
compatible = "mmio-sram";
};
soc {
eefc: flash-controller@400e0c00 {
compatible = "atmel,sam-flash-controller";
label = "FLASH_CTRL";
reg = <0x400e0c00 0x200>;
interrupts = <6 0>;
peripheral-id = <6>;
#address-cells = <1>;
#size-cells = <1>;
flash0: flash@400000 {
compatible = "soc-nv-flash";
label = "FLASH_E70";
write-block-size = <16>;
erase-block-size = <8192>;
};
};
wdt: watchdog@400e1850 {
compatible = "atmel,sam-watchdog";
reg = <0x400e1850 0xc>;
interrupts = <4 0>;
peripheral-id = <4>;
label = "WATCHDOG_0";
status = "disabled";
};
twihs0: i2c@40018000 {
compatible = "atmel,sam-i2c-twihs";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40018000 0x12B>;
interrupts = <19 0>;
peripheral-id = <19>;
label = "I2C_0";
status = "disabled";
pinctrl-0 = <&pa4a_twihs0_twck0 &pa3a_twihs0_twd0>;
};
twihs1: i2c@4001c000 {
compatible = "atmel,sam-i2c-twihs";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4001c000 0x12B>;
interrupts = <20 0>;
peripheral-id = <20>;
label = "I2C_1";
status = "disabled";
pinctrl-0 = <&pb5a_twihs1_twck1 &pb4a_twihs1_twd1>;
};
twihs2: i2c@40060000 {
compatible = "atmel,sam-i2c-twihs";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40060000 0x12B>;
interrupts = <41 0>;
peripheral-id = <41>;
label = "I2C_2";
status = "disabled";
pinctrl-0 = <&pd28c_twihs2_twck2 &pd27c_twihs2_twd2>;
};
spi0: spi@40008000 {
compatible = "atmel,sam-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40008000 0x4000>;
interrupts = <21 0>;
peripheral-id = <21>;
label = "SPI_0";
status = "disabled";
pinctrl-0 = <&pd20b_spi0_miso &pd21b_spi0_mosi &pd22b_spi0_spck>;
};
spi1: spi@40058000 {
compatible = "atmel,sam-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40058000 0x4000>;
interrupts = <42 0>;
peripheral-id = <42>;
label = "SPI_1";
status = "disabled";
pinctrl-0 = <&pc26c_spi1_miso &pc27c_spi1_mosi &pc24c_spi1_spck>;
};
uart0: uart@400e0800 {
compatible = "atmel,sam-uart";
reg = <0x400e0800 0x100>;
interrupts = <7 1>;
peripheral-id = <7>;
status = "disabled";
label = "UART_0";
pinctrl-0 = <&pa9a_uart0_urxd0 &pa10a_uart0_utxd0>;
};
uart1: uart@400e0a00 {
compatible = "atmel,sam-uart";
reg = <0x400e0a00 0x100>;
interrupts = <8 1>;
peripheral-id = <8>;
status = "disabled";
label = "UART_1";
};
uart2: uart@400e1a00 {
compatible = "atmel,sam-uart";
reg = <0x400e1a00 0x100>;
interrupts = <44 1>;
peripheral-id = <44>;
status = "disabled";
label = "UART_2";
};
uart3: uart@400e1c00 {
compatible = "atmel,sam-uart";
reg = <0x400e1c00 0x100>;
interrupts = <45 1>;
peripheral-id = <45>;
status = "disabled";
label = "UART_3";
};
uart4: uart@400e1e00 {
compatible = "atmel,sam-uart";
reg = <0x400e1e00 0x100>;
interrupts = <46 1>;
peripheral-id = <46>;
status = "disabled";
label = "UART_4";
};
usart0: usart@40024000 {
compatible = "atmel,sam-usart";
reg = <0x40024000 0x100>;
interrupts = <13 0>;
peripheral-id = <13>;
status = "disabled";
label = "USART_0";
pinctrl-0 = <&pb0c_usart0_rxd0 &pb1c_usart0_txd0>;
};
usart1: usart@40028000 {
compatible = "atmel,sam-usart";
reg = <0x40028000 0x100>;
interrupts = <14 0>;
peripheral-id = <14>;
status = "disabled";
label = "USART_1";
pinctrl-0 = <&pa21a_usart1_rxd1 &pb4d_usart1_txd1>;
};
usart2: usart@4002c000 {
compatible = "atmel,sam-usart";
reg = <0x4002c000 0x100>;
interrupts = <15 0>;
peripheral-id = <15>;
status = "disabled";
label = "USART_2";
pinctrl-0 = <&pd15b_usart2_rxd2 &pd16b_usart2_txd2>;
};
afec0: adc@4003c000 {
compatible = "atmel,sam-afec";
reg = <0x4003c000 0x100>;
interrupts = <29 0>;
peripheral-id = <29>;
status = "disabled";
label = "ADC_0";
#io-channel-cells = <1>;
pinctrl-0 = <&pa8b_afec0_adtrg>;
};
afec1: adc@40064000 {
compatible = "atmel,sam-afec";
reg = <0x40064000 0x100>;
interrupts = <40 0>;
peripheral-id = <40>;
status = "disabled";
label = "ADC_1";
#io-channel-cells = <1>;
pinctrl-0 = <&pd9c_afec1_adtrg>;
};
pinctrl@400e0e00 {
compatible = "atmel,sam-pinctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x400e0e00 0x400e0e00 0xa00>;
pioa: gpio@400e0e00 {
compatible = "atmel,sam-gpio";
reg = <0x400e0e00 0x190>;
interrupts = <10 1>;
peripheral-id = <10>;
label = "PORTA";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
piob: gpio@400e1000 {
compatible = "atmel,sam-gpio";
reg = <0x400e1000 0x190>;
interrupts = <11 1>;
peripheral-id = <11>;
label = "PORTB";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
pioc: gpio@400e1200 {
compatible = "atmel,sam-gpio";
reg = <0x400e1200 0x190>;
interrupts = <12 1>;
peripheral-id = <12>;
label = "PORTC";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
piod: gpio@400e1400 {
compatible = "atmel,sam-gpio";
reg = <0x400e1400 0x190>;
interrupts = <16 1>;
peripheral-id = <16>;
label = "PORTD";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
pioe: gpio@400e1600 {
compatible = "atmel,sam-gpio";
reg = <0x400e1600 0x190>;
interrupts = <17 1>;
peripheral-id = <17>;
label = "PORTE";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
};
pwm0: pwm0@40020000 {
compatible = "atmel,sam-pwm";
reg = <0x40020000 0x4000>;
interrupts = <31 0>;
peripheral-id = <31>;
status = "disabled";
label = "PWM_0";
prescaler = <10>;
divider = <1>;
#pwm-cells = <2>;
};
pwm1: pwm1@4005c000 {
compatible = "atmel,sam-pwm";
reg = <0x4005c000 0x4000>;
interrupts = <60 0>;
peripheral-id = <60>;
status = "disabled";
label = "PWM_1";
prescaler = <10>;
divider = <1>;
#pwm-cells = <2>;
};
usbhs: usbd@40038000 {
compatible = "atmel,sam-usbhs";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40038000 0x4000>;
interrupts = <34 0>;
interrupt-names = "usbhs";
maximum-speed = "full-speed";
num-bidir-endpoints = <10>;
peripheral-id = <34>;
status = "disabled";
label = "USBHS";
};
gmac: ethernet@40050088 {
compatible = "atmel,sam-gmac";
reg = <0x40050088 0x4000>;
interrupts = <39 0>, <66 0>, <67 0>;
interrupt-names = "gmac", "q1", "q2";
num-queues = <3>;
local-mac-address = [00 00 00 00 00 00];
label = "GMAC";
status = "disabled";
/* Default to RMII config */
pinctrl-0 = <&pd0a_gmac_gtxck &pd1a_gmac_gtxen
&pd2a_gmac_gtx0 &pd3a_gmac_gtx1
&pd4a_gmac_grxdv &pd5a_gmac_grx0
&pd6a_gmac_grx1 &pd7a_gmac_grxer
&pd8a_gmac_gmdc &pd9a_gmac_gmdio>;
};
trng: random@40070000 {
compatible = "atmel,sam-trng";
reg = <0x40070000 0x4000>;
interrupts = <57 0>;
peripheral-id = <57>;
status = "okay";
label = "TRNG";
};
xdmac: dma-controller@40078000 {
compatible = "atmel,sam-xdmac";
reg = <0x40078000 0x400>;
interrupts = <58 0>;
peripheral-id = <58>;
label = "DMA_0";
#dma-cells = <2>;
};
ssc: ssc@40004000 {
compatible = "atmel,sam-ssc";
reg = <0x40004000 0x400>;
interrupts = <22 0>;
peripheral-id = <22>;
label = "SSC_0";
status = "disabled";
};
};
};
&nvic {
arm,num-irq-priority-bits = <3>;
};