blob: f8b143a95ba2df506e15cc261a667d7c6cedae45 [file] [log] [blame]
/* SPDX-License-Identifier: Apache-2.0 */
/dts-v1/;
#include <nxp/MK64FN1M0VLL12.dtsi>
/ {
model = "NXP Freedom MK64F board";
compatible = "nxp,mk64f12", "nxp,k64f", "nxp,k6x";
aliases {
led0 = &green_led;
led1 = &blue_led;
led2 = &red_led;
sw0 = &user_button_3;
sw1 = &user_button_2;
};
chosen {
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-pipe = &uart0;
zephyr,can-primary = &flexcan0;
};
leds {
compatible = "gpio-leds";
red_led: led_0 {
gpios = <&gpiob 22 GPIO_ACTIVE_LOW>;
label = "User LD1";
};
green_led: led_1 {
gpios = <&gpioe 26 GPIO_ACTIVE_LOW>;
label = "User LD2";
};
blue_led: led_2 {
gpios = <&gpiob 21 GPIO_ACTIVE_LOW>;
label = "User LD3";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button_2: button_0 {
label = "User SW2";
gpios = <&gpioc 6 GPIO_ACTIVE_LOW>;
};
user_button_3: button_1 {
label = "User SW3";
gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
};
};
arduino_header: connector {
compatible = "arduino-header-r3";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &gpiob 2 0>, /* A0 */
<1 0 &gpiob 3 0>, /* A1 */
<2 0 &gpiob 10 0>, /* A2 */
<3 0 &gpiob 11 0>, /* A3 */
<4 0 &gpioc 11 0>, /* A4 */
<5 0 &gpioc 10 0>, /* A5 */
<6 0 &gpioc 16 0>, /* D0 */
<7 0 &gpioc 17 0>, /* D1 */
<8 0 &gpiob 9 0>, /* D2 */
<9 0 &gpioa 1 0>, /* D3 */
<10 0 &gpiob 23 0>, /* D4 */
<11 0 &gpioa 2 0>, /* D5 */
<12 0 &gpioc 2 0>, /* D6 */
<13 0 &gpioc 3 0>, /* D7 */
/* NOTE: HW Rev D and below use: */
/* <14 0 &gpioa 0 0>, */
/* NOTE: HW Rev E and on use: */
<14 0 &gpioc 12 0>, /* D8 */
<15 0 &gpioc 4 0>, /* D9 */
<16 0 &gpiod 0 0>, /* D10 */
<17 0 &gpiod 2 0>, /* D11 */
<18 0 &gpiod 3 0>, /* D12 */
<19 0 &gpiod 1 0>, /* D13 */
<20 0 &gpioe 25 0>, /* D14 */
<21 0 &gpioe 24 0>; /* D15 */
};
};
&sim {
pllfll-select = <KINETIS_SIM_PLLFLLSEL_MCGPLLCLK>;
er32k-select = <KINETIS_SIM_ER32KSEL_RTC>;
};
arduino_serial: &uart3 {
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&UART3_RX_PTC16 &UART3_TX_PTC17>;
};
&cpu0 {
clock-frequency = <120000000>;
};
&adc0 {
status = "okay";
};
&adc1 {
status = "okay";
};
&temp1 {
status = "okay";
};
&dac0 {
status = "okay";
voltage-reference = <2>;
};
arduino_i2c: &i2c0 {
status = "okay";
pinctrl-0 = <&I2C0_SCL_PTE24 &I2C0_SDA_PTE25>;
fxos8700@1d {
compatible = "nxp,fxos8700";
reg = <0x1d>;
label = "FXOS8700";
int1-gpios = <&gpioc 6 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
};
};
arduino_spi: &spi0 {
status = "okay";
pinctrl-0 = <&SPI0_PCS0_PTD0 &SPI0_SCK_PTD1 &SPI0_SOUT_PTD2 &SPI0_SIN_PTD3>;
};
&ftm0 {
status = "okay";
compatible = "nxp,kinetis-ftm-pwm";
#pwm-cells = <3>;
pinctrl-0 = <&FTM0_CH0_PTC1>;
};
&ftm3 {
status = "okay";
compatible = "nxp,kinetis-ftm-pwm";
#pwm-cells = <3>;
pinctrl-0 = <&FTM3_CH4_PTC8 &FTM3_CH5_PTC9>;
};
&uart0 {
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&UART0_RX_PTB16 &UART0_TX_PTB17>;
};
&uart2 {
pinctrl-0 = <&UART2_RTS_b_PTD0 &UART2_CTS_b_PTD1 &UART2_RX_PTD2 &UART2_TX_PTD3>;
};
zephyr_udc0: &usbotg {
compatible = "nxp,kinetis-usbd";
status = "okay";
num-bidir-endpoints = <8>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0x00010000>;
read-only;
};
/*
* The flash starting at 0x00010000 and ending at
* 0x0001ffff (sectors 16-31) is reserved for use
* by the application.
*/
storage_partition: partition@1e000 {
label = "storage";
reg = <0x0001e000 0x00002000>;
};
slot0_partition: partition@20000 {
label = "image-0";
reg = <0x00020000 0x00060000>;
};
slot1_partition: partition@80000 {
label = "image-1";
reg = <0x00080000 0x00060000>;
};
scratch_partition: partition@e0000 {
label = "image-scratch";
reg = <0x000e0000 0x00020000>;
};
};
};
&enet {
status = "okay";
pinctrl-0 = <&RMII0_RXER_PTA5 &RMII0_RXD1_PTA12
&RMII0_RXD0_PTA13 &RMII0_CRS_DV_PTA14
&RMII0_TXEN_PTA15 &RMII0_TXD0_PTA16
&RMII0_TXD1_PTA17 &RMII0_MDIO_PTB0
&RMII0_MDC_PTB1>;
ptp {
status = "okay";
pinctrl-0 = <&ENET0_1588_TMR0_PTC16 &ENET0_1588_TMR1_PTC17
&ENET0_1588_TMR2_PTC18>;
};
};
&RMII0_MDIO_PTB0 {
bias-pull-up;
drive-open-drain;
};
&flexcan0 {
status = "okay";
pinctrl-0 = <&CAN0_TX_PTB18 &CAN0_RX_PTB19>;
bus-speed = <125000>;
};
&CAN0_RX_PTB19 {
bias-pull-up;
};
&edma0 {
status = "okay";
};
&pit0 {
status = "okay";
};