| description: STM32 USART | |
| compatible: "st,stm32-usart" | |
| include: [uart-controller.yaml, pinctrl-device.yaml] | |
| properties: | |
| reg: | |
| required: true | |
| interrupts: | |
| required: true | |
| single-wire: | |
| type: boolean | |
| required: false | |
| description: | | |
| Enable the single wire half-duplex communication. | |
| Using this mode, TX and RX lines are internally connected and | |
| only TX pin is used afterwards and should be configured. | |
| RX/TX conflicts must be handled on user side. | |
| pinctrl-0: | |
| required: true | |
| pinctrl-names: | |
| required: true |