blob: 5b5e7735e4a4c387dc75d454522c3ad39e4e0b0d [file] [log] [blame]
/*
* Copyright (c) 2023 Panasonic Industrial Devices Europe GmbH
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "pan1783_cpunet-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>
/ {
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,bt-hci-ipc = &ipc0;
nordic,802154-spinel-ipc = &ipc0;
zephyr,ieee802154 = &ieee802154;
};
leds {
compatible = "gpio-leds";
evb_led1: evb_led_1 {
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
label = "LED1 on EVB";
};
evb_led2: evb_led_2 {
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
label = "LED2 on EVB";
};
evb_led3: evb_led_3 {
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
label = "LED3 on EVB";
};
evb_led4: evb_led_4 {
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
label = "LED4 on EVB";
};
};
buttons {
compatible = "gpio-keys";
evb_sw1: evb_sw_1 {
gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "SW1 on EVB";
zephyr,code = <INPUT_KEY_0>;
};
evb_sw2: evb_sw_2 {
gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "SW2 on EVB";
zephyr,code = <INPUT_KEY_1>;
};
evb_sw3: evb_sw_3 {
gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "SW3 on EVB";
zephyr,code = <INPUT_KEY_2>;
};
evb_sw4: evb_sw_4 {
gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "SW4 on EVB";
zephyr,code = <INPUT_KEY_3>;
};
};
mikrobus_header: mikrobus-connector {
compatible = "mikro-bus";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &gpio0 4 0>, /* AN */
/* Not a GPIO*/ /* RST */
<2 0 &gpio1 12 0>, /* CS */
<3 0 &gpio1 15 0>, /* SCK */
<4 0 &gpio1 14 0>, /* MISO */
<5 0 &gpio1 13 0>, /* MOSI */
/* +3.3V */
/* GND */
<6 0 &gpio1 7 0>, /* PWM */
<7 0 &gpio1 4 0>, /* INT */
<8 0 &gpio1 0 0>, /* RX */
<9 0 &gpio1 1 0>, /* TX */
<10 0 &gpio1 3 0>, /* SCL */
<11 0 &gpio1 2 0>; /* SDA */
/* +5V */
/* GND */
};
arduino_header: connector {
compatible = "arduino-header-r3";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &gpio0 4 0>, /* A0 */
<1 0 &gpio0 5 0>, /* A1 */
<2 0 &gpio0 6 0>, /* A2 */
<3 0 &gpio0 7 0>, /* A3 */
<4 0 &gpio0 25 0>, /* A4 */
<5 0 &gpio0 26 0>, /* A5 */
<6 0 &gpio1 0 0>, /* D0 */
<7 0 &gpio1 1 0>, /* D1 */
<8 0 &gpio1 4 0>, /* D2 */
<9 0 &gpio1 5 0>, /* D3 */
<10 0 &gpio1 6 0>, /* D4 */
<11 0 &gpio1 7 0>, /* D5 */
<12 0 &gpio1 8 0>, /* D6 */
<13 0 &gpio1 9 0>, /* D7 */
<14 0 &gpio1 10 0>, /* D8 */
<15 0 &gpio1 11 0>, /* D9 */
<16 0 &gpio1 12 0>, /* D10 */
<17 0 &gpio1 13 0>, /* D11 */
<18 0 &gpio1 14 0>, /* D12 */
<19 0 &gpio1 15 0>, /* D13 */
<20 0 &gpio1 2 0>, /* D14 */
<21 0 &gpio1 3 0>; /* D15 */
};
/* These aliases are provided for compatibility with samples */
aliases {
led0 = &evb_led1;
led1 = &evb_led2;
led2 = &evb_led3;
led3 = &evb_led4;
sw0 = &evb_sw1;
sw1 = &evb_sw2;
sw2 = &evb_sw3;
sw3 = &evb_sw4;
bootloader-led0 = &evb_led1;
mcuboot-button0 = &evb_sw1;
mcuboot-led0 = &evb_led1;
watchdog0 = &wdt0;
};
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uart0 {
status = "disabled";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
arduino_serial: &uart0 {};
arduino_i2c: &i2c0 {
compatible = "nordic,nrf-twim";
/* Cannot be used together with uart0. */
/* status = "okay"; */
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
arduino_spi: &spi0 {
compatible = "nordic,nrf-spim";
/* Cannot be used together with uart0. */
/* status = "okay"; */
cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */
pinctrl-0 = <&spi0_default>;
pinctrl-1 = <&spi0_sleep>;
pinctrl-names = "default", "sleep";
};
&flash1 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0xc000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x17000>;
};
slot1_partition: partition@23000 {
label = "image-1";
reg = <0x00023000 0x17000>;
};
storage_partition: partition@3a000 {
label = "storage";
reg = <0x0003a000 0x6000>;
};
};
};
&ieee802154 {
status = "okay";
};
/* Include shared RAM configuration file */
#include "pan1783_shared_sram_planning_conf.dtsi"