| sample: |
| description: LVGL sample application |
| name: lvgl |
| tests: |
| sample.display.lvgl.gui: |
| filter: dt_chosen_enabled("zephyr,display") |
| # flash usage varies depending on the platform, but ~200K are the bare |
| # minimum, give some room by adding 50K more. RAM usage depends largerly on |
| # the display buffer, but a minimum is also required for the system itself. |
| # ~25K seem to be sufficient for most cases, rounded to 32K. |
| min_flash: 250 |
| min_ram: 32 |
| harness: none |
| tags: |
| - samples |
| - display |
| - gui |
| - lvgl |
| modules: |
| - lvgl |
| integration_platforms: |
| - native_sim_64 |
| sample.display.lvgl.rk055hdmipi4m: |
| # This sample is intended to test the RT1170 and RT595, which require |
| # a display shield to work with LVGL |
| min_flash: 250 |
| # The minimum RAM needed for this display is actually around 8MB, |
| # but the RT595 uses external PSRAM for the display buffer |
| min_ram: 32 |
| harness: none |
| tags: |
| - samples |
| - display |
| - gui |
| modules: |
| - lvgl |
| extra_args: SHIELD="rk055hdmipi4m" |
| platform_allow: |
| - mimxrt1170_evk_cm7 |
| - mimxrt595_evk_cm33 |
| integration_platforms: |
| - mimxrt1170_evk_cm7 |
| sample.subsys.display.lvgl.st_b_lcd40_dsi1_mb1166: |
| platform_allow: stm32h747i_disco_m7 |
| extra_args: SHIELD=st_b_lcd40_dsi1_mb1166 |
| harness: console |
| harness_config: |
| fixture: fixture_display |
| modules: |
| - lvgl |
| tags: |
| - samples |
| - display |
| - shield |
| - lvgl |
| - gui |
