| /* |
| * Copyright (c) 2016, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "fsl_pint.h" |
| |
| /******************************************************************************* |
| * Variables |
| ******************************************************************************/ |
| |
| /*! @brief Irq number array */ |
| static const IRQn_Type s_pintIRQ[FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS] = PINT_IRQS; |
| |
| /*! @brief Callback function array for PINT(s). */ |
| static pint_cb_t s_pintCallback[FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS]; |
| |
| /******************************************************************************* |
| * Code |
| ******************************************************************************/ |
| |
| void PINT_Init(PINT_Type *base) |
| { |
| uint32_t i; |
| uint32_t pmcfg; |
| |
| assert(base); |
| |
| pmcfg = 0; |
| for (i = 0; i < FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS; i++) |
| { |
| s_pintCallback[i] = NULL; |
| } |
| |
| /* Disable all bit slices */ |
| for (i = 0; i < PINT_PIN_INT_COUNT; i++) |
| { |
| pmcfg = pmcfg | (kPINT_PatternMatchNever << (PININT_BITSLICE_CFG_START + (i * 3U))); |
| } |
| |
| /* Enable the peripheral clock */ |
| CLOCK_EnableClock(kCLOCK_Pint); |
| |
| /* Reset the peripheral */ |
| RESET_PeripheralReset(kPINT_RST_SHIFT_RSTn); |
| |
| /* Disable all pattern match bit slices */ |
| base->PMCFG = pmcfg; |
| } |
| |
| void PINT_PinInterruptConfig(PINT_Type *base, pint_pin_int_t intr, pint_pin_enable_t enable, pint_cb_t callback) |
| { |
| assert(base); |
| |
| /* Clear Rise and Fall flags first */ |
| PINT_PinInterruptClrRiseFlag(base, intr); |
| PINT_PinInterruptClrFallFlag(base, intr); |
| |
| /* select level or edge sensitive */ |
| base->ISEL = (base->ISEL & ~(1U << intr)) | ((enable & PINT_PIN_INT_LEVEL) ? (1U << intr) : 0U); |
| |
| /* enable rising or level interrupt */ |
| if (enable & (PINT_PIN_INT_LEVEL | PINT_PIN_INT_RISE)) |
| { |
| base->SIENR = 1U << intr; |
| } |
| else |
| { |
| base->CIENR = 1U << intr; |
| } |
| |
| /* Enable falling or select high level */ |
| if (enable & PINT_PIN_INT_FALL_OR_HIGH_LEVEL) |
| { |
| base->SIENF = 1U << intr; |
| } |
| else |
| { |
| base->CIENF = 1U << intr; |
| } |
| |
| s_pintCallback[intr] = callback; |
| } |
| |
| void PINT_PinInterruptGetConfig(PINT_Type *base, pint_pin_int_t pintr, pint_pin_enable_t *enable, pint_cb_t *callback) |
| { |
| uint32_t mask; |
| bool level; |
| |
| assert(base); |
| |
| *enable = kPINT_PinIntEnableNone; |
| level = false; |
| |
| mask = 1U << pintr; |
| if (base->ISEL & mask) |
| { |
| /* Pin interrupt is level sensitive */ |
| level = true; |
| } |
| |
| if (base->IENR & mask) |
| { |
| if (level) |
| { |
| /* Level interrupt is enabled */ |
| *enable = kPINT_PinIntEnableLowLevel; |
| } |
| else |
| { |
| /* Rising edge interrupt */ |
| *enable = kPINT_PinIntEnableRiseEdge; |
| } |
| } |
| |
| if (base->IENF & mask) |
| { |
| if (level) |
| { |
| /* Level interrupt is active high */ |
| *enable = kPINT_PinIntEnableHighLevel; |
| } |
| else |
| { |
| /* Either falling or both edge */ |
| if (*enable == kPINT_PinIntEnableRiseEdge) |
| { |
| /* Rising and faling edge */ |
| *enable = kPINT_PinIntEnableBothEdges; |
| } |
| else |
| { |
| /* Falling edge */ |
| *enable = kPINT_PinIntEnableFallEdge; |
| } |
| } |
| } |
| |
| *callback = s_pintCallback[pintr]; |
| } |
| |
| void PINT_PatternMatchConfig(PINT_Type *base, pint_pmatch_bslice_t bslice, pint_pmatch_cfg_t *cfg) |
| { |
| uint32_t src_shift; |
| uint32_t cfg_shift; |
| uint32_t pmcfg; |
| |
| assert(base); |
| |
| src_shift = PININT_BITSLICE_SRC_START + (bslice * 3U); |
| cfg_shift = PININT_BITSLICE_CFG_START + (bslice * 3U); |
| |
| /* Input source selection for selected bit slice */ |
| base->PMSRC = (base->PMSRC & ~(PININT_BITSLICE_SRC_MASK << src_shift)) | (cfg->bs_src << src_shift); |
| |
| /* Bit slice configuration */ |
| pmcfg = base->PMCFG; |
| pmcfg = (pmcfg & ~(PININT_BITSLICE_CFG_MASK << cfg_shift)) | (cfg->bs_cfg << cfg_shift); |
| |
| /* If end point is true, enable the bits */ |
| if (bslice != 7U) |
| { |
| if (cfg->end_point) |
| { |
| pmcfg |= (0x1U << bslice); |
| } |
| else |
| { |
| pmcfg &= ~(0x1U << bslice); |
| } |
| } |
| |
| base->PMCFG = pmcfg; |
| |
| /* Save callback pointer */ |
| s_pintCallback[bslice] = cfg->callback; |
| } |
| |
| void PINT_PatternMatchGetConfig(PINT_Type *base, pint_pmatch_bslice_t bslice, pint_pmatch_cfg_t *cfg) |
| { |
| uint32_t src_shift; |
| uint32_t cfg_shift; |
| |
| assert(base); |
| |
| src_shift = PININT_BITSLICE_SRC_START + (bslice * 3U); |
| cfg_shift = PININT_BITSLICE_CFG_START + (bslice * 3U); |
| |
| cfg->bs_src = (pint_pmatch_input_src_t)((base->PMSRC & (PININT_BITSLICE_SRC_MASK << src_shift)) >> src_shift); |
| cfg->bs_cfg = (pint_pmatch_bslice_cfg_t)((base->PMCFG & (PININT_BITSLICE_CFG_MASK << cfg_shift)) >> cfg_shift); |
| |
| if (bslice == 7U) |
| { |
| cfg->end_point = true; |
| } |
| else |
| { |
| cfg->end_point = (base->PMCFG & (0x1U << bslice)) >> bslice; |
| } |
| cfg->callback = s_pintCallback[bslice]; |
| } |
| |
| uint32_t PINT_PatternMatchResetDetectLogic(PINT_Type *base) |
| { |
| uint32_t pmctrl; |
| uint32_t pmstatus; |
| uint32_t pmsrc; |
| |
| pmctrl = PINT->PMCTRL; |
| pmstatus = pmctrl >> PINT_PMCTRL_PMAT_SHIFT; |
| if (pmstatus) |
| { |
| /* Reset Pattern match engine detection logic */ |
| pmsrc = base->PMSRC; |
| base->PMSRC = pmsrc; |
| } |
| return (pmstatus); |
| } |
| |
| void PINT_EnableCallback(PINT_Type *base) |
| { |
| uint32_t i; |
| |
| assert(base); |
| |
| PINT_PinInterruptClrStatusAll(base); |
| for (i = 0; i < FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS; i++) |
| { |
| NVIC_ClearPendingIRQ(s_pintIRQ[i]); |
| PINT_PinInterruptClrStatus(base, (pint_pin_int_t)i); |
| EnableIRQ(s_pintIRQ[i]); |
| } |
| } |
| |
| void PINT_DisableCallback(PINT_Type *base) |
| { |
| uint32_t i; |
| |
| assert(base); |
| |
| for (i = 0; i < FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS; i++) |
| { |
| DisableIRQ(s_pintIRQ[i]); |
| PINT_PinInterruptClrStatus(base, (pint_pin_int_t)i); |
| NVIC_ClearPendingIRQ(s_pintIRQ[i]); |
| } |
| } |
| |
| void PINT_Deinit(PINT_Type *base) |
| { |
| uint32_t i; |
| |
| assert(base); |
| |
| /* Cleanup */ |
| PINT_DisableCallback(base); |
| for (i = 0; i < FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS; i++) |
| { |
| s_pintCallback[i] = NULL; |
| } |
| |
| /* Reset the peripheral */ |
| RESET_PeripheralReset(kPINT_RST_SHIFT_RSTn); |
| |
| /* Disable the peripheral clock */ |
| CLOCK_DisableClock(kCLOCK_Pint); |
| } |
| |
| /* IRQ handler functions overloading weak symbols in the startup */ |
| void PIN_INT0_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt0); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt0] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt0](kPINT_PinInt0, pmstatus); |
| } |
| } |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 1U) |
| void PIN_INT1_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt1); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt1] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt1](kPINT_PinInt1, pmstatus); |
| } |
| } |
| #endif |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 2U) |
| void PIN_INT2_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt2); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt2] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt2](kPINT_PinInt2, pmstatus); |
| } |
| } |
| #endif |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 3U) |
| void PIN_INT3_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt3); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt3] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt3](kPINT_PinInt3, pmstatus); |
| } |
| } |
| #endif |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 4U) |
| void PIN_INT4_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt4); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt4] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt4](kPINT_PinInt4, pmstatus); |
| } |
| } |
| #endif |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 5U) |
| void PIN_INT5_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt5); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt5] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt5](kPINT_PinInt5, pmstatus); |
| } |
| } |
| #endif |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 6U) |
| void PIN_INT6_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt6); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt6] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt6](kPINT_PinInt6, pmstatus); |
| } |
| } |
| #endif |
| |
| #if (FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS > 7U) |
| void PIN_INT7_DriverIRQHandler(void) |
| { |
| uint32_t pmstatus; |
| |
| /* Reset pattern match detection */ |
| pmstatus = PINT_PatternMatchResetDetectLogic(PINT); |
| /* Clear Pin interrupt before callback */ |
| PINT_PinInterruptClrStatus(PINT, kPINT_PinInt7); |
| /* Call user function */ |
| if (s_pintCallback[kPINT_PinInt7] != NULL) |
| { |
| s_pintCallback[kPINT_PinInt7](kPINT_PinInt7, pmstatus); |
| } |
| } |
| #endif |