samples/display/ili9340/README.rst

.. _ili9340-sample:

ILI9340 Display driver
######################

Overview
********

Every half-second, this sample application draws a color-filled rectangle in a
corner of the LCD display.  The rectangle fill color cycles through red, green,
and blue on each update.

Requirements
************

- `ST NUCLEO-L476RG development board`_
- `Adafruit 2.2 inch TFT Display`_

Wiring
******

The NUCLEO-L476RG should be connected as follows to the Adafruit TFT display.

+------------------+-----------------+----------------+
| | NUCLEO-L476RG  | | NUCLEO-L476RG | | Adafruit TFT |
| | Arduino Header | | Pin           | | Pin          |
+==================+=================+================+
| D3               | PB3             | SCK            |
+------------------+-----------------+----------------+
| D7               | PA8             | D/C            |
+------------------+-----------------+----------------+
| D8               | PA9             | RST            |
+------------------+-----------------+----------------+
| D11              | PA7             | MOSI           |
+------------------+-----------------+----------------+
| D12              | PA6             | MISO           |
+------------------+-----------------+----------------+
| A2               | PA4             | NSS            |
+------------------+-----------------+----------------+

Building and Running
********************

Build this sample application with the following commands:

.. zephyr-app-commands::
   :zephyr-app: samples/display/ili9340
   :board: nucleo_l476rg
   :goals: build
   :compact:

See :ref:`nucleo_l476rg_board` on how to flash the build.

References
**********

- `ILI9340 datasheet`_

.. _Adafruit 2.2 inch TFT Display: https://www.adafruit.com/product/1480
.. _ST NUCLEO-L476RG development board: http://www.st.com/en/evaluation-tools/nucleo-l476rg.html
.. _ILI9340 datasheet: https://cdn-shop.adafruit.com/datasheets/ILI9340.pdf