| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include "fsl_sim.h" |
| |
| /* Component ID definition, used by tools. */ |
| #ifndef FSL_COMPONENT_ID |
| #define FSL_COMPONENT_ID "platform.drivers.sim" |
| #endif |
| |
| /******************************************************************************* |
| * Codes |
| ******************************************************************************/ |
| #if (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) |
| /*! |
| * brief Sets the USB voltage regulator setting. |
| * |
| * This function configures whether the USB voltage regulator is enabled in |
| * normal RUN mode, STOP/VLPS/LLS/VLLS modes, and VLPR/VLPW modes. The configurations |
| * are passed in as mask value of \ref _sim_usb_volt_reg_enable_mode. For example, to enable |
| * USB voltage regulator in RUN/VLPR/VLPW modes and disable in STOP/VLPS/LLS/VLLS mode, |
| * use: |
| * |
| * SIM_SetUsbVoltRegulatorEnableMode(kSIM_UsbVoltRegEnable | kSIM_UsbVoltRegEnableInLowPower); |
| * |
| * param mask USB voltage regulator enable setting. |
| */ |
| void SIM_SetUsbVoltRegulatorEnableMode(uint32_t mask) |
| { |
| SIM->SOPT1CFG |= (SIM_SOPT1CFG_URWE_MASK | SIM_SOPT1CFG_UVSWE_MASK | SIM_SOPT1CFG_USSWE_MASK); |
| |
| SIM->SOPT1 = (SIM->SOPT1 & ~kSIM_UsbVoltRegEnableInAllModes) | mask; |
| } |
| #endif /* FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR */ |
| |
| /*! |
| * brief Gets the unique identification register value. |
| * |
| * param uid Pointer to the structure to save the UID value. |
| */ |
| void SIM_GetUniqueId(sim_uid_t *uid) |
| { |
| #if defined(SIM_UIDH) |
| uid->H = SIM->UIDH; |
| #endif |
| #if (defined(FSL_FEATURE_SIM_HAS_UIDM) && FSL_FEATURE_SIM_HAS_UIDM) |
| uid->M = SIM->UIDM; |
| #else |
| uid->MH = SIM->UIDMH; |
| uid->ML = SIM->UIDML; |
| #endif /* FSL_FEATURE_SIM_HAS_UIDM */ |
| uid->L = SIM->UIDL; |
| } |
| |
| #if (defined(FSL_FEATURE_SIM_HAS_RF_MAC_ADDR) && FSL_FEATURE_SIM_HAS_RF_MAC_ADDR) |
| /*! |
| * brief Gets the RF address register value. |
| * |
| * param info Pointer to the structure to save the RF address value. |
| */ |
| void SIM_GetRfAddr(sim_rf_addr_t *info) |
| { |
| info->rfAddrL = SIM->RFADDRL; |
| info->rfAddrH = SIM->RFADDRH; |
| } |
| #endif /* FSL_FEATURE_SIM_HAS_RF_MAC_ADDR */ |