| # Kconfig - Quark X1000 SoC configuration options |
| |
| # |
| # Copyright (c) 2014-2015 Wind River Systems, Inc. |
| # Copyright (c) 2015-2016 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| if SOC_SERIES_QUARK_X1000 |
| |
| config SOC_SERIES |
| default "quark_x1000" |
| |
| config SYS_CLOCK_HW_CYCLES_PER_SEC |
| default 25000000 if HPET_TIMER |
| |
| config CLFLUSH_DETECT |
| default y if CACHE_FLUSHING |
| |
| if SHARED_IRQ |
| |
| config SHARED_IRQ_0 |
| default y |
| |
| endif # SHARED_IRQ |
| |
| if PCI_LEGACY_BRIDGE |
| |
| config PCI_LEGACY_BRIDGE_BUS |
| default 0 |
| config PCI_LEGACY_BRIDGE_DEV |
| default 31 |
| config PCI_LEGACY_BRIDGE_VENDOR_ID |
| default 0x8086 |
| config PCI_LEGACY_BRIDGE_DEVICE_ID |
| default 0x095e |
| |
| endif # PCI_LEGACY_BRIDGE |
| |
| if I2C |
| |
| config I2C_DW |
| default y |
| |
| if I2C_DW |
| |
| config I2C_DW_CLOCK_SPEED |
| default 25 |
| |
| config I2C_0 |
| default y |
| |
| if I2C_0 |
| |
| config I2C_0_IRQ_PRI |
| default 2 |
| |
| endif # I2C_0 |
| |
| endif # I2C_DW |
| |
| endif # I2C |
| |
| |
| if GPIO |
| |
| config GPIO_SCH |
| default y |
| |
| if GPIO_SCH |
| |
| config GPIO_SCH_0 |
| default y |
| |
| config GPIO_SCH_1 |
| default y |
| |
| if GPIO_SCH_0 |
| |
| config GPIO_SCH_0_DEV_NAME |
| default "GPIO_CW" |
| |
| endif # GPIO_SCH_0 |
| |
| if GPIO_SCH_1 |
| |
| config GPIO_SCH_1_DEV_NAME |
| default "GPIO_RW" |
| |
| endif # GPIO_SCH_1 |
| |
| endif # GPIO_SCH |
| |
| config GPIO_DW |
| default y |
| |
| if GPIO_DW |
| |
| config GPIO_DW_0 |
| default y |
| |
| if GPIO_DW_0 |
| |
| config GPIO_DW_0_NAME |
| default "GPIO_0" |
| config GPIO_DW_0_IRQ_PRI |
| default 2 |
| |
| endif # GPIO_DW_0 |
| |
| endif # GPIO_DW |
| |
| endif # GPIO |
| |
| |
| if SPI |
| |
| config SPI_INTEL |
| default y |
| |
| if SPI_INTEL |
| |
| config SPI_0 |
| default y |
| |
| config SPI_1 |
| default n |
| |
| endif # SPI_INTEL |
| |
| endif # SPI |
| |
| if UART_NS16550 |
| |
| config UART_NS16550_PCI |
| default y if PCI |
| |
| config UART_NS16550_PORT_0 |
| default y |
| |
| if UART_NS16550_PORT_0 |
| |
| config UART_NS16550_PORT_0_OPTIONS |
| default 0 |
| |
| config UART_NS16550_PORT_0_PCI |
| default y if UART_NS16550_PCI |
| |
| endif # UART_NS16550_PORT_0 |
| |
| config UART_NS16550_PORT_1 |
| default y if PCI |
| |
| if UART_NS16550_PORT_1 |
| |
| config UART_NS16550_PORT_1_OPTIONS |
| default 0 |
| |
| config UART_NS16550_PORT_1_PCI |
| default y if UART_NS16550_PCI |
| |
| endif # UART_NS16550_PORT_1 |
| |
| endif # UART_NS16550 |
| |
| |
| if NET_L2_ETHERNET |
| config ETH_DW |
| default y |
| |
| if ETH_DW |
| |
| config ETH_DW_0 |
| default y |
| |
| endif # ETH_DW |
| |
| endif # NET_L2_ETHERNET |
| |
| # Pin multiplexer uses PCAL9535A, needs to be initialized after it |
| config PINMUX_INIT_PRIORITY |
| default 80 if PINMUX |
| |
| if UART_CONSOLE |
| |
| endif |
| |
| if BT_UART |
| |
| config BT_UART_ON_DEV_NAME |
| default "UART_1" |
| |
| endif |
| |
| source "soc/x86/intel_quark/quark_x1000/Kconfig.defconfig.quark_x1000" |
| endif # SOC_SERIES_QUARK_X1000 |