blob: 1ee58bf442a7fd95fa08c0487014bc3d31db68b2 [file] [log] [blame]
/*
*
* Copyright (c) 2017 Linaro Limited.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <soc.h>
#include <soc_registers.h>
#include <clock_control.h>
#include <misc/util.h>
#include <clock_control/stm32_clock_control.h>
#include "stm32_ll_clock.h"
#ifdef CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL
/* Macros to fill up division factors values */
#define z_pllm(v) LL_RCC_PLLM_DIV_ ## v
#define pllm(v) z_pllm(v)
#define z_pllr(v) LL_RCC_PLLR_DIV_ ## v
#define pllr(v) z_pllr(v)
/**
* @brief fill in pll configuration structure
*/
void config_pll_init(LL_UTILS_PLLInitTypeDef *pllinit)
{
pllinit->PLLM = pllm(CONFIG_CLOCK_STM32_PLL_M_DIVISOR);
pllinit->PLLN = CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER;
pllinit->PLLR = pllr(CONFIG_CLOCK_STM32_PLL_R_DIVISOR);
}
#endif /* CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL */
/**
* @brief Activate default clocks
*/
void config_enable_default_clocks(void)
{
#ifdef CONFIG_CLOCK_STM32_LSE
/* LSE belongs to the back-up domain, enable access.*/
/* Enable the power interface clock */
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
/* Set the DBP bit in the Power control register 1 (PWR_CR1) */
LL_PWR_EnableBkUpAccess();
while (!LL_PWR_IsEnabledBkUpAccess()) {
/* Wait for Backup domain access */
}
/* Enable LSE Oscillator (32.768 kHz) */
LL_RCC_LSE_Enable();
while (!LL_RCC_LSE_IsReady()) {
/* Wait for LSE ready */
}
LL_PWR_DisableBkUpAccess();
#endif
}