arch/x86/soc/quark_d2000/Kconfig.defconfig

#
# Copyright (c) 2015-2016 Intel Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

if SOC_QUARK_D2000

config SOC
	default quark_d2000

config  SYS_CLOCK_HW_CYCLES_PER_SEC
	default 32000000

config  PHYS_LOAD_ADDR
	default 0x00180000 if XIP
	default 0x00280000 if !XIP

config RAM_SIZE
        default 8

config ROM_SIZE
        default 32

config IDT_NUM_VECTORS
	default 64

config IOAPIC_NUM_RTES
	default 32

config LOAPIC_TIMER_IRQ
	default 0

config LOAPIC_TIMER_IRQ_PRIORITY
	default 2

config PHYS_RAM_ADDR
	default 0x00280000
	help
	This option specifies the physical SRAM address of this Soc.

config TOOLCHAIN_VARIANT
        default "iamcu"

if UART_NS16550

config UART_NS16550_DLF
	def_bool y

config UART_NS16550_PORT_0
	def_bool y

if UART_NS16550_PORT_0

config UART_NS16550_PORT_0_NAME
	default "UART_0"
config UART_NS16550_PORT_0_IRQ_PRI
	default 3
config UART_NS16550_PORT_0_BAUD_RATE
	default 115200
config UART_NS16550_PORT_0_OPTIONS
	default 0
config UART_NS16550_PORT_0_DLF
	default 0x06

endif # UART_NS16550_PORT_0

config UART_NS16550_PORT_1
	def_bool y

if UART_NS16550_PORT_1

config UART_NS16550_PORT_1_NAME
	default "UART_1"
config UART_NS16550_PORT_1_IRQ_PRI
	default 3
config UART_NS16550_PORT_1_BAUD_RATE
	default 115200
config UART_NS16550_PORT_1_OPTIONS
	default 0
config UART_NS16550_PORT_1_DLF
	default 0x06

endif # UART_NS16550_PORT_1

endif # UART_NS16550

if UART_QMSI
config UART_QMSI_0
	def_bool y
config UART_QMSI_0_IRQ
	default 8
config UART_QMSI_0_IRQ_PRI
	default 0
config UART_QMSI_1
	def_bool y
config UART_QMSI_1_IRQ
	default 6
config UART_QMSI_1_IRQ_PRI
	default 0
endif # UART_QMSI

if BLUETOOTH_UART

config BLUETOOTH_UART_ON_DEV_NAME
	default "UART_1"

endif

if UART_PIPE

config UART_PIPE_ON_DEV_NAME
	default "UART_1"

endif

if WATCHDOG
config WDT_DW
	def_bool y

if WDT_DW
config WDT_DW_IRQ_PRI
	default 0
endif # WDT_DW

if WDT_QMSI
config WDT_QMSI_IRQ
	default 16
config WDT_QMSI_IRQ_PRI
	default 0
endif # WDT_QMSI
endif # WATCHDOG

if RTC

if RTC_QMSI
config RTC_QMSI_IRQ
	default 2
config RTC_QMSI_IRQ_PRI
	default 0
endif # RTC_QMSI

config RTC_DW
	def_bool y
config RTC_DW_IRQ_PRI
	default 0 if RTC_DW

endif # RTC

if I2C

config I2C_DW
	def_bool y

if I2C_DW

config I2C_DW_0
        def_bool y

if I2C_DW_0

config I2C_DW_0_NAME
        default "I2C0"

config I2C_DW_0_IRQ_PRI
        default 0

config I2C_DW_0_DEFAULT_CFG
        default 0x12

config I2C_CLOCK_SPEED
        default 32

endif # I2C_DW_0

endif # I2C_DW

if I2C_QMSI
config I2C_QMSI_0
	def_bool y
config I2C_QMSI_0_IRQ
	default 4
config I2C_QMSI_0_IRQ_PRI
	default 0
config I2C_QMSI_0_DEFAULT_CFG
	default 0x12
endif # I2C_QMSI
endif # I2C

if GPIO_QMSI
config GPIO_QMSI_0
	def_bool y
config GPIO_QMSI_0_IRQ
	default 15
config GPIO_QMSI_0_PRI
	default 0
endif # GPIO_QMSI

if SPI_QMSI
config SPI_QMSI_PORT_0
	def_bool y
config SPI_QMSI_PORT_0_IRQ
	default 7
config SPI_QMSI_PORT_0_PRI
	default 0
endif # SPI_QMSI

if AON_TIMER_QMSI
config AON_TIMER_IRQ
	default 3
config AON_TIMER_IRQ_PRI
	default 0
endif # AON_TIMER_QMSI

endif # SOC_QUARK_D2000