blob: 71f7416daf7f68bdd580597458dbca621eb14abf [file] [log] [blame]
# Kconfig.beetle - ARM CMSDK APB SoC UART configuration options
#
#
# Copyright (c) 2016 Linaro Limited
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
menuconfig UART_CMSDK_APB
bool "ARM CMSDK APB UART driver"
default n
select SERIAL_HAS_DRIVER
depends on SOC_FAMILY_ARM
help
This option enables the UART driver for ARM CMSDK APB UART.
if UART_CMSDK_APB
# ---------- Port 0 ----------
config UART_CMSDK_APB_PORT0
bool "Enable driver for UART 0"
default n
help
Build the driver to utilize UART controller Port 0.
config UART_CMSDK_APB_PORT0_NAME
string "Device Name for UART 0"
default "UART_0"
depends on UART_CMSDK_APB_PORT0
help
This is the device name for UART, and is included in the device
struct.
config UART_CMSDK_APB_PORT0_IRQ_PRI
int "UART Interrupt Priority (Interrupt support)"
default 2
depends on UART_CMSDK_APB_PORT0
depends on UART_INTERRUPT_DRIVEN
help
The interrupt priority for UART port.
config UART_CMSDK_APB_PORT0_BAUD_RATE
int "Baud Rate"
range 9600 115200
default 115200
depends on UART_CMSDK_APB_PORT0
help
The baud rate for UART port to be set to at boot.
# ---------- Port 1 ----------
config UART_CMSDK_APB_PORT1
bool "Enable driver for UART 1"
default n
help
Build the driver to utilize UART controller Port 1.
config UART_CMSDK_APB_PORT1_NAME
string "Device Name for UART 1"
default "UART_1"
depends on UART_CMSDK_APB_PORT1
help
This is the device name for UART, and is included in the device
struct.
config UART_CMSDK_APB_PORT1_IRQ_PRI
int "UART Interrupt Priority (Interrupt support)"
default 2
depends on UART_CMSDK_APB_PORT1
depends on UART_INTERRUPT_DRIVEN
help
The interrupt priority for UART port.
config UART_CMSDK_APB_PORT1_BAUD_RATE
int "Baud Rate"
range 9600 115200
default 115200
depends on UART_CMSDK_APB_PORT1
help
The baud rate for UART port to be set to at boot.
# ---------- Port 2 ----------
config UART_CMSDK_APB_PORT2
bool "Enable driver for UART 2"
default n
help
Build the driver to utilize UART controller Port 2.
config UART_CMSDK_APB_PORT2_NAME
string "Device Name for UART 2"
default "UART_2"
depends on UART_CMSDK_APB_PORT2
help
This is the device name for UART, and is included in the device
struct.
config UART_CMSDK_APB_PORT2_IRQ_PRI
int "UART Interrupt Priority (Interrupt support)"
default 2
depends on UART_CMSDK_APB_PORT2
depends on UART_INTERRUPT_DRIVEN
help
The interrupt priority for UART port.
config UART_CMSDK_APB_PORT2_BAUD_RATE
int "Baud Rate"
range 9600 115200
default 115200
depends on UART_CMSDK_APB_PORT2
help
The baud rate for UART port to be set to at boot.
# ---------- Port 3 ----------
config UART_CMSDK_APB_PORT3
bool "Enable driver for UART 3"
default n
help
Build the driver to utilize UART controller Port 3.
config UART_CMSDK_APB_PORT3_NAME
string "Device Name for UART 3"
default "UART_3"
depends on UART_CMSDK_APB_PORT3
help
This is the device name for UART, and is included in the device
struct.
config UART_CMSDK_APB_PORT3_IRQ_PRI
int "UART Interrupt Priority (Interrupt support)"
default 2
depends on UART_CMSDK_APB_PORT3
depends on UART_INTERRUPT_DRIVEN
help
The interrupt priority for UART port.
config UART_CMSDK_APB_PORT3_BAUD_RATE
int "Baud Rate"
range 9600 115200
default 115200
depends on UART_CMSDK_APB_PORT3
help
The baud rate for UART port to be set to at boot.
# ---------- Port 4 ----------
config UART_CMSDK_APB_PORT4
bool "Enable driver for UART 4"
default n
help
Build the driver to utilize UART controller Port 4.
config UART_CMSDK_APB_PORT4_NAME
string "Device Name for UART 4"
default "UART_4"
depends on UART_CMSDK_APB_PORT4
help
This is the device name for UART, and is included in the device
struct.
config UART_CMSDK_APB_PORT4_IRQ_PRI
int "UART Interrupt Priority (Interrupt support)"
default 2
depends on UART_CMSDK_APB_PORT4
depends on UART_INTERRUPT_DRIVEN
help
The interrupt priority for UART port.
config UART_CMSDK_APB_PORT4_BAUD_RATE
int "Baud Rate"
range 9600 115200
default 115200
depends on UART_CMSDK_APB_PORT4
help
The baud rate for UART port to be set to at boot.
endif # UART_CMSDK_APB