| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of Freescale Semiconductor, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SDRVL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _FSL_GPIO_H_ |
| #define _FSL_GPIO_H_ |
| |
| #include "fsl_common.h" |
| |
| /*! |
| * @addtogroup gpio |
| * @{ |
| */ |
| |
| /*! @file */ |
| |
| /******************************************************************************* |
| * Definitions |
| ******************************************************************************/ |
| |
| /*! @name Driver version */ |
| /*@{*/ |
| /*! @brief GPIO driver version 2.1.0. */ |
| #define FSL_GPIO_DRIVER_VERSION (MAKE_VERSION(2, 1, 0)) |
| /*@}*/ |
| |
| /*! @brief GPIO direction definition*/ |
| typedef enum _gpio_pin_direction |
| { |
| kGPIO_DigitalInput = 0U, /*!< Set current pin as digital input*/ |
| kGPIO_DigitalOutput = 1U, /*!< Set current pin as digital output*/ |
| } gpio_pin_direction_t; |
| |
| /*! |
| * @brief The GPIO pin configuration structure. |
| * |
| * Every pin can only be configured as either output pin or input pin at a time. |
| * If configured as a input pin, then leave the outputConfig unused |
| * Note : In some cases, the corresponding port property should be configured in advance |
| * with the PORT_SetPinConfig() |
| */ |
| typedef struct _gpio_pin_config |
| { |
| gpio_pin_direction_t pinDirection; /*!< gpio direction, input or output */ |
| /* Output configurations, please ignore if configured as a input one */ |
| uint8_t outputLogic; /*!< Set default output logic, no use in input */ |
| } gpio_pin_config_t; |
| |
| /*! @} */ |
| |
| /******************************************************************************* |
| * API |
| ******************************************************************************/ |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| /*! |
| * @addtogroup gpio_driver |
| * @{ |
| */ |
| |
| /*! @name GPIO Configuration */ |
| /*@{*/ |
| |
| /*! |
| * @brief Initializes a GPIO pin used by the board. |
| * |
| * To initialize the GPIO, define a pin configuration, either input or output, in the user file. |
| * Then, call the GPIO_PinInit() function. |
| * |
| * This is an example to define an input pin or output pin configuration: |
| * @code |
| * // Define a digital input pin configuration, |
| * gpio_pin_config_t config = |
| * { |
| * kGPIO_DigitalInput, |
| * 0, |
| * } |
| * //Define a digital output pin configuration, |
| * gpio_pin_config_t config = |
| * { |
| * kGPIO_DigitalOutput, |
| * 0, |
| * } |
| * @endcode |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param pin GPIO port pin number |
| * @param config GPIO pin configuration pointer |
| */ |
| void GPIO_PinInit(GPIO_Type *base, uint32_t pin, const gpio_pin_config_t *config); |
| |
| /*@}*/ |
| |
| /*! @name GPIO Output Operations */ |
| /*@{*/ |
| |
| /*! |
| * @brief Sets the output level of the multiple GPIO pins to the logic 1 or 0. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param pin GPIO pin's number |
| * @param output GPIO pin output logic level. |
| * - 0: corresponding pin output low logic level. |
| * - 1: corresponding pin output high logic level. |
| */ |
| static inline void GPIO_WritePinOutput(GPIO_Type *base, uint32_t pin, uint8_t output) |
| { |
| if (output == 0U) |
| { |
| base->PCOR = 1 << pin; |
| } |
| else |
| { |
| base->PSOR = 1 << pin; |
| } |
| } |
| |
| /*! |
| * @brief Sets the output level of the multiple GPIO pins to the logic 1. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask GPIO pins' numbers macro |
| */ |
| static inline void GPIO_SetPinsOutput(GPIO_Type *base, uint32_t mask) |
| { |
| base->PSOR = mask; |
| } |
| |
| /*! |
| * @brief Sets the output level of the multiple GPIO pins to the logic 0. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask GPIO pins' numbers macro |
| */ |
| static inline void GPIO_ClearPinsOutput(GPIO_Type *base, uint32_t mask) |
| { |
| base->PCOR = mask; |
| } |
| |
| /*! |
| * @brief Reverses current output logic of the multiple GPIO pins. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask GPIO pins' numbers macro |
| */ |
| static inline void GPIO_TogglePinsOutput(GPIO_Type *base, uint32_t mask) |
| { |
| base->PTOR = mask; |
| } |
| /*@}*/ |
| |
| /*! @name GPIO Input Operations */ |
| /*@{*/ |
| |
| /*! |
| * @brief Reads the current input value of the whole GPIO port. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param pin GPIO pin's number |
| * @retval GPIO port input value |
| * - 0: corresponding pin input low logic level. |
| * - 1: corresponding pin input high logic level. |
| */ |
| static inline uint32_t GPIO_ReadPinInput(GPIO_Type *base, uint32_t pin) |
| { |
| return (((base->PDIR) >> pin) & 0x01U); |
| } |
| /*@}*/ |
| |
| /*! @name GPIO Interrupt */ |
| /*@{*/ |
| |
| /*! |
| * @brief Reads whole GPIO port interrupt status flag. |
| * |
| * If a pin is configured to generate the DMA request, the corresponding flag |
| * is cleared automatically at the completion of the requested DMA transfer. |
| * Otherwise, the flag remains set until a logic one is written to that flag. |
| * If configured for a level sensitive interrupt that remains asserted, the flag |
| * is set again immediately. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @retval Current GPIO port interrupt status flag, for example, 0x00010001 means the |
| * pin 0 and 17 have the interrupt. |
| */ |
| uint32_t GPIO_GetPinsInterruptFlags(GPIO_Type *base); |
| |
| /*! |
| * @brief Clears multiple GPIO pins' interrupt status flag. |
| * |
| * @param base GPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask GPIO pins' numbers macro |
| */ |
| void GPIO_ClearPinsInterruptFlags(GPIO_Type *base, uint32_t mask); |
| |
| /*@}*/ |
| /*! @} */ |
| |
| /*! |
| * @addtogroup fgpio_driver |
| * @{ |
| */ |
| |
| /* |
| * Introduce the FGPIO feature. |
| * |
| * The FGPIO features are only support on some of Kinetis chips. The FGPIO registers are aliased to the IOPORT |
| * interface. Accesses via the IOPORT interface occur in parallel with any instruction fetches and will therefore |
| * complete in a single cycle. This aliased Fast GPIO memory map is called FGPIO. |
| */ |
| |
| #if defined(FSL_FEATURE_SOC_FGPIO_COUNT) && FSL_FEATURE_SOC_FGPIO_COUNT |
| |
| /*! @name FGPIO Configuration */ |
| /*@{*/ |
| |
| /*! |
| * @brief Initializes a FGPIO pin used by the board. |
| * |
| * To initialize the FGPIO driver, define a pin configuration, either input or output, in the user file. |
| * Then, call the FGPIO_PinInit() function. |
| * |
| * This is an example to define an input pin or output pin configuration: |
| * @code |
| * // Define a digital input pin configuration, |
| * gpio_pin_config_t config = |
| * { |
| * kGPIO_DigitalInput, |
| * 0, |
| * } |
| * //Define a digital output pin configuration, |
| * gpio_pin_config_t config = |
| * { |
| * kGPIO_DigitalOutput, |
| * 0, |
| * } |
| * @endcode |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param pin FGPIO port pin number |
| * @param config FGPIO pin configuration pointer |
| */ |
| void FGPIO_PinInit(FGPIO_Type *base, uint32_t pin, const gpio_pin_config_t *config); |
| |
| /*@}*/ |
| |
| /*! @name FGPIO Output Operations */ |
| /*@{*/ |
| |
| /*! |
| * @brief Sets the output level of the multiple FGPIO pins to the logic 1 or 0. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param pin FGPIO pin's number |
| * @param output FGPIOpin output logic level. |
| * - 0: corresponding pin output low logic level. |
| * - 1: corresponding pin output high logic level. |
| */ |
| static inline void FGPIO_WritePinOutput(FGPIO_Type *base, uint32_t pin, uint8_t output) |
| { |
| if (output == 0U) |
| { |
| base->PCOR = 1 << pin; |
| } |
| else |
| { |
| base->PSOR = 1 << pin; |
| } |
| } |
| |
| /*! |
| * @brief Sets the output level of the multiple FGPIO pins to the logic 1. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask FGPIO pins' numbers macro |
| */ |
| static inline void FGPIO_SetPinsOutput(FGPIO_Type *base, uint32_t mask) |
| { |
| base->PSOR = mask; |
| } |
| |
| /*! |
| * @brief Sets the output level of the multiple FGPIO pins to the logic 0. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask FGPIO pins' numbers macro |
| */ |
| static inline void FGPIO_ClearPinsOutput(FGPIO_Type *base, uint32_t mask) |
| { |
| base->PCOR = mask; |
| } |
| |
| /*! |
| * @brief Reverses current output logic of the multiple FGPIO pins. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask FGPIO pins' numbers macro |
| */ |
| static inline void FGPIO_TogglePinsOutput(FGPIO_Type *base, uint32_t mask) |
| { |
| base->PTOR = mask; |
| } |
| /*@}*/ |
| |
| /*! @name FGPIO Input Operations */ |
| /*@{*/ |
| |
| /*! |
| * @brief Reads the current input value of the whole FGPIO port. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param pin FGPIO pin's number |
| * @retval FGPIO port input value |
| * - 0: corresponding pin input low logic level. |
| * - 1: corresponding pin input high logic level. |
| */ |
| static inline uint32_t FGPIO_ReadPinInput(FGPIO_Type *base, uint32_t pin) |
| { |
| return (((base->PDIR) >> pin) & 0x01U); |
| } |
| /*@}*/ |
| |
| /*! @name FGPIO Interrupt */ |
| /*@{*/ |
| |
| /*! |
| * @brief Reads the whole FGPIO port interrupt status flag. |
| * |
| * If a pin is configured to generate the DMA request, the corresponding flag |
| * is cleared automatically at the completion of the requested DMA transfer. |
| * Otherwise, the flag remains set until a logic one is written to that flag. |
| * If configured for a level sensitive interrupt that remains asserted, the flag |
| * is set again immediately. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @retval Current FGPIO port interrupt status flags, for example, 0x00010001 means the |
| * pin 0 and 17 have the interrupt. |
| */ |
| uint32_t FGPIO_GetPinsInterruptFlags(FGPIO_Type *base); |
| |
| /*! |
| * @brief Clears the multiple FGPIO pins' interrupt status flag. |
| * |
| * @param base FGPIO peripheral base pointer(GPIOA, GPIOB, GPIOC, and so on.) |
| * @param mask FGPIO pins' numbers macro |
| */ |
| void FGPIO_ClearPinsInterruptFlags(FGPIO_Type *base, uint32_t mask); |
| |
| /*@}*/ |
| |
| #endif /* FSL_FEATURE_SOC_FGPIO_COUNT */ |
| |
| #if defined(__cplusplus) |
| } |
| #endif |
| |
| /*! |
| * @} |
| */ |
| |
| #endif /* _FSL_GPIO_H_*/ |