| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of Freescale Semiconductor, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef _FSL_LLWU_H_ |
| #define _FSL_LLWU_H_ |
| |
| #include "fsl_common.h" |
| |
| /*! @addtogroup llwu */ |
| /*! @{ */ |
| |
| /*! @file */ |
| |
| /******************************************************************************* |
| * Definitions |
| ******************************************************************************/ |
| |
| /*! @name Driver version */ |
| /*@{*/ |
| /*! @brief LLWU driver version 2.0.1. */ |
| #define FSL_LLWU_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) |
| /*@}*/ |
| |
| /*! |
| * @brief External input pin control modes |
| */ |
| typedef enum _llwu_external_pin_mode |
| { |
| kLLWU_ExternalPinDisable = 0U, /*!< Pin disabled as wakeup input. */ |
| kLLWU_ExternalPinRisingEdge = 1U, /*!< Pin enabled with rising edge detection. */ |
| kLLWU_ExternalPinFallingEdge = 2U, /*!< Pin enabled with falling edge detection.*/ |
| kLLWU_ExternalPinAnyEdge = 3U /*!< Pin enabled with any change detection. */ |
| } llwu_external_pin_mode_t; |
| |
| /*! |
| * @brief Digital filter control modes |
| */ |
| typedef enum _llwu_pin_filter_mode |
| { |
| kLLWU_PinFilterDisable = 0U, /*!< Filter disabled. */ |
| kLLWU_PinFilterRisingEdge = 1U, /*!< Filter positive edge detection.*/ |
| kLLWU_PinFilterFallingEdge = 2U, /*!< Filter negative edge detection.*/ |
| kLLWU_PinFilterAnyEdge = 3U /*!< Filter any edge detection. */ |
| } llwu_pin_filter_mode_t; |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_VERID) && FSL_FEATURE_LLWU_HAS_VERID) |
| /*! |
| * @brief IP version ID definition. |
| */ |
| typedef struct _llwu_version_id |
| { |
| uint16_t feature; /*!< Feature Specification Number. */ |
| uint8_t minor; /*!< Minor version number. */ |
| uint8_t major; /*!< Major version number. */ |
| } llwu_version_id_t; |
| #endif /* FSL_FEATURE_LLWU_HAS_VERID */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_PARAM) && FSL_FEATURE_LLWU_HAS_PARAM) |
| /*! |
| * @brief IP parameter definition. |
| */ |
| typedef struct _llwu_param |
| { |
| uint8_t filters; /*!< Number of pin filter. */ |
| uint8_t dmas; /*!< Number of wakeup DMA. */ |
| uint8_t modules; /*!< Number of wakeup module. */ |
| uint8_t pins; /*!< Number of wake up pin. */ |
| } llwu_param_t; |
| #endif /* FSL_FEATURE_LLWU_HAS_PARAM */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_PIN_FILTER) && FSL_FEATURE_LLWU_HAS_PIN_FILTER) |
| /*! |
| * @brief External input pin filter control structure |
| */ |
| typedef struct _llwu_external_pin_filter_mode |
| { |
| uint32_t pinIndex; /*!< Pin number */ |
| llwu_pin_filter_mode_t filterMode; /*!< Filter mode */ |
| } llwu_external_pin_filter_mode_t; |
| #endif /* FSL_FEATURE_LLWU_HAS_PIN_FILTER */ |
| |
| /******************************************************************************* |
| * API |
| ******************************************************************************/ |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| /*! |
| * @name Low-Leakage Wakeup Unit Control APIs |
| * @{ |
| */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_VERID) && FSL_FEATURE_LLWU_HAS_VERID) |
| /*! |
| * @brief Gets the LLWU version ID. |
| * |
| * This function gets the LLWU version ID, including major version number, |
| * minor version number, and feature specification number. |
| * |
| * @param base LLWU peripheral base address. |
| * @param versionId Pointer to version ID structure. |
| */ |
| static inline void LLWU_GetVersionId(LLWU_Type *base, llwu_version_id_t *versionId) |
| { |
| *((uint32_t *)versionId) = base->VERID; |
| } |
| #endif /* FSL_FEATURE_LLWU_HAS_VERID */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_PARAM) && FSL_FEATURE_LLWU_HAS_PARAM) |
| /*! |
| * @brief Gets the LLWU parameter. |
| * |
| * This function gets the LLWU parameter, including wakeup pin number, module |
| * number, DMA number, and pin filter number. |
| * |
| * @param base LLWU peripheral base address. |
| * @param param Pointer to LLWU param structure. |
| */ |
| static inline void LLWU_GetParam(LLWU_Type *base, llwu_param_t *param) |
| { |
| *((uint32_t *)param) = base->PARAM; |
| } |
| #endif /* FSL_FEATURE_LLWU_HAS_PARAM */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN) && FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN) |
| /*! |
| * @brief Sets the external input pin source mode. |
| * |
| * This function sets the external input pin source mode that is used |
| * as a wake up source. |
| * |
| * @param base LLWU peripheral base address. |
| * @param pinIndex pin index which to be enabled as external wakeup source, start from 1. |
| * @param pinMode pin configuration mode defined in llwu_external_pin_modes_t |
| */ |
| void LLWU_SetExternalWakeupPinMode(LLWU_Type *base, uint32_t pinIndex, llwu_external_pin_mode_t pinMode); |
| |
| /*! |
| * @brief Gets the external wakeup source flag. |
| * |
| * This function checks the external pin flag to detect whether the MCU is |
| * woke up by the specific pin. |
| * |
| * @param base LLWU peripheral base address. |
| * @param pinIndex pin index, start from 1. |
| * @return true if the specific pin is wake up source. |
| */ |
| bool LLWU_GetExternalWakeupPinFlag(LLWU_Type *base, uint32_t pinIndex); |
| |
| /*! |
| * @brief Clears the external wakeup source flag. |
| * |
| * This function clears the external wakeup source flag for a specific pin. |
| * |
| * @param base LLWU peripheral base address. |
| * @param pinIndex pin index, start from 1. |
| */ |
| void LLWU_ClearExternalWakeupPinFlag(LLWU_Type *base, uint32_t pinIndex); |
| #endif /* FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE) && FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE) |
| /*! |
| * @brief Enables/disables the internal module source. |
| * |
| * This function enables/disables the internal module source mode that is used |
| * as a wake up source. |
| * |
| * @param base LLWU peripheral base address. |
| * @param moduleIndex module index which to be enabled as internal wakeup source, start from 1. |
| * @param enable enable or disable setting |
| */ |
| static inline void LLWU_EnableInternalModuleInterruptWakup(LLWU_Type *base, uint32_t moduleIndex, bool enable) |
| { |
| if (enable) |
| { |
| base->ME |= 1U << moduleIndex; |
| } |
| else |
| { |
| base->ME &= ~(1U << moduleIndex); |
| } |
| } |
| |
| /*! |
| * @brief Gets the external wakeup source flag. |
| * |
| * This function checks the external pin flag to detect whether the system is |
| * woke up by the specific pin. |
| * |
| * @param base LLWU peripheral base address. |
| * @param moduleIndex module index, start from 1. |
| * @return true if the specific pin is wake up source. |
| */ |
| static inline bool LLWU_GetInternalWakeupModuleFlag(LLWU_Type *base, uint32_t moduleIndex) |
| { |
| #if (defined(FSL_FEATURE_LLWU_REG_BITWIDTH) && (FSL_FEATURE_LLWU_REG_BITWIDTH == 32)) |
| return (bool)(base->MF & (1U << moduleIndex)); |
| #else |
| #if (defined(FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN) && (FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN > 16)) |
| #if (defined(FSL_FEATURE_LLWU_HAS_PF) && FSL_FEATURE_LLWU_HAS_PF) |
| return (bool)(base->MF5 & (1U << moduleIndex)); |
| #else |
| return (bool)(base->F5 & (1U << moduleIndex)); |
| #endif /* FSL_FEATURE_LLWU_HAS_PF */ |
| #else |
| #if (defined(FSL_FEATURE_LLWU_HAS_PF) && FSL_FEATURE_LLWU_HAS_PF) |
| return (bool)(base->PF3 & (1U << moduleIndex)); |
| #else |
| return (bool)(base->F3 & (1U << moduleIndex)); |
| #endif |
| #endif /* FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN */ |
| #endif /* FSL_FEATURE_LLWU_REG_BITWIDTH */ |
| } |
| #endif /* FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG) && FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG) |
| /*! |
| * @brief Enables/disables the internal module DMA wakeup source. |
| * |
| * This function enables/disables the internal DMA that is used as a wake up source. |
| * |
| * @param base LLWU peripheral base address. |
| * @param moduleIndex Internal module index which used as DMA request source, start from 1. |
| * @param enable Enable or disable DMA request source |
| */ |
| static inline void LLWU_EnableInternalModuleDmaRequestWakup(LLWU_Type *base, uint32_t moduleIndex, bool enable) |
| { |
| if (enable) |
| { |
| base->DE |= 1U << moduleIndex; |
| } |
| else |
| { |
| base->DE &= ~(1U << moduleIndex); |
| } |
| } |
| #endif /* FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_PIN_FILTER) && FSL_FEATURE_LLWU_HAS_PIN_FILTER) |
| /*! |
| * @brief Sets the pin filter configuration. |
| * |
| * This function sets the pin filter configuration. |
| * |
| * @param base LLWU peripheral base address. |
| * @param filterIndex pin filter index which used to enable/disable the digital filter, start from 1. |
| * @param filterMode filter mode configuration |
| */ |
| void LLWU_SetPinFilterMode(LLWU_Type *base, uint32_t filterIndex, llwu_external_pin_filter_mode_t filterMode); |
| |
| /*! |
| * @brief Gets the pin filter configuration. |
| * |
| * This function gets the pin filter flag. |
| * |
| * @param base LLWU peripheral base address. |
| * @param filterIndex pin filter index, start from 1. |
| * @return true if the flag is a source of existing a low-leakage power mode. |
| */ |
| bool LLWU_GetPinFilterFlag(LLWU_Type *base, uint32_t filterIndex); |
| |
| /*! |
| * @brief Clear the pin filter configuration. |
| * |
| * This function clear the pin filter flag. |
| * |
| * @param base LLWU peripheral base address. |
| * @param filterIndex pin filter index which to be clear the flag, start from 1. |
| */ |
| void LLWU_ClearPinFilterFlag(LLWU_Type *base, uint32_t filterIndex); |
| |
| #endif /* FSL_FEATURE_LLWU_HAS_PIN_FILTER */ |
| |
| #if (defined(FSL_FEATURE_LLWU_HAS_RESET_ENABLE) && FSL_FEATURE_LLWU_HAS_RESET_ENABLE) |
| /*! |
| * @brief Sets the reset pin mode. |
| * |
| * This function sets how the reset pin is used as a low leakage mode exit source. |
| * |
| * @param pinEnable Enable reset pin filter |
| * @param pinFilterEnable Specify whether pin filter is enabled in Low-Leakage power mode. |
| */ |
| void LLWU_SetResetPinMode(LLWU_Type *base, bool pinEnable, bool enableInLowLeakageMode); |
| #endif /* FSL_FEATURE_LLWU_HAS_RESET_ENABLE */ |
| |
| /*@}*/ |
| |
| #if defined(__cplusplus) |
| } |
| #endif |
| |
| /*! @}*/ |
| #endif /* _FSL_LLWU_H_*/ |