/** | |
****************************************************************************** | |
* @file stm32f1xx_hal.h | |
* @author MCD Application Team | |
* @version V1.1.0 | |
* @date 14-April-2017 | |
* @brief This file contains all the functions prototypes for the HAL | |
* module driver. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F1xx_HAL_H | |
#define __STM32F1xx_HAL_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f1xx_hal_conf.h" | |
/** @addtogroup STM32F1xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup HAL | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup HAL_Exported_Macros HAL Exported Macros | |
* @{ | |
*/ | |
/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode | |
* @brief Freeze/Unfreeze Peripherals in Debug mode | |
* Note: On devices STM32F10xx8 and STM32F10xxB, | |
* STM32F101xC/D/E and STM32F103xC/D/E, | |
* STM32F101xF/G and STM32F103xF/G | |
* STM32F10xx4 and STM32F10xx6 | |
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in | |
* debug mode (not accessible by the user software in normal mode). | |
* Refer to errata sheet of these devices for more details. | |
* @{ | |
*/ | |
/* Peripherals on APB1 */ | |
/** | |
* @brief TIM2 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) | |
/** | |
* @brief TIM3 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) | |
#if defined (DBGMCU_CR_DBG_TIM4_STOP) | |
/** | |
* @brief TIM4 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM5_STOP) | |
/** | |
* @brief TIM5 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM6_STOP) | |
/** | |
* @brief TIM6 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM7_STOP) | |
/** | |
* @brief TIM7 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM12_STOP) | |
/** | |
* @brief TIM12 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM13_STOP) | |
/** | |
* @brief TIM13 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM14_STOP) | |
/** | |
* @brief TIM14 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) | |
#endif | |
/** | |
* @brief WWDG Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) | |
/** | |
* @brief IWDG Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) | |
/** | |
* @brief I2C1 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) | |
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) | |
#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) | |
/** | |
* @brief I2C2 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) | |
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) | |
#endif | |
#if defined (DBGMCU_CR_DBG_CAN1_STOP) | |
/** | |
* @brief CAN1 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_CAN2_STOP) | |
/** | |
* @brief CAN2 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) | |
#endif | |
/* Peripherals on APB2 */ | |
#if defined (DBGMCU_CR_DBG_TIM1_STOP) | |
/** | |
* @brief TIM1 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM8_STOP) | |
/** | |
* @brief TIM8 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM9_STOP) | |
/** | |
* @brief TIM9 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM10_STOP) | |
/** | |
* @brief TIM10 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM11_STOP) | |
/** | |
* @brief TIM11 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM15_STOP) | |
/** | |
* @brief TIM15 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM16_STOP) | |
/** | |
* @brief TIM16 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) | |
#endif | |
#if defined (DBGMCU_CR_DBG_TIM17_STOP) | |
/** | |
* @brief TIM17 Peripherals Debug mode | |
*/ | |
#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) | |
#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) | |
#endif | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup HAL_Exported_Functions | |
* @{ | |
*/ | |
/** @addtogroup HAL_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions ******************************/ | |
HAL_StatusTypeDef HAL_Init(void); | |
HAL_StatusTypeDef HAL_DeInit(void); | |
void HAL_MspInit(void); | |
void HAL_MspDeInit(void); | |
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); | |
/** | |
* @} | |
*/ | |
/** @addtogroup HAL_Exported_Functions_Group2 | |
* @{ | |
*/ | |
/* Peripheral Control functions ************************************************/ | |
void HAL_IncTick(void); | |
void HAL_Delay(__IO uint32_t Delay); | |
uint32_t HAL_GetTick(void); | |
void HAL_SuspendTick(void); | |
void HAL_ResumeTick(void); | |
uint32_t HAL_GetHalVersion(void); | |
uint32_t HAL_GetREVID(void); | |
uint32_t HAL_GetDEVID(void); | |
void HAL_DBGMCU_EnableDBGSleepMode(void); | |
void HAL_DBGMCU_DisableDBGSleepMode(void); | |
void HAL_DBGMCU_EnableDBGStopMode(void); | |
void HAL_DBGMCU_DisableDBGStopMode(void); | |
void HAL_DBGMCU_EnableDBGStandbyMode(void); | |
void HAL_DBGMCU_DisableDBGStandbyMode(void); | |
void HAL_GetUID(uint32_t *UID); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/** @defgroup HAL_Private_Variables HAL Private Variables | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup HAL_Private_Constants HAL Private Constants | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/* Private functions ---------------------------------------------------------*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F1xx_HAL_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |