| /*! |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * All rights reserved. |
| * |
| * \file MCR20Overwrites.h |
| * Description: Overwrites header file for MCR20 Register values |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of Freescale Semiconductor, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef OVERWRITES_H_ |
| #define OVERWRITES_H_ |
| |
| typedef struct overwrites_tag { |
| char address; |
| char data; |
| }overwrites_t; |
| |
| |
| /*****************************************************************************************************************/ |
| // This file is created exclusively for use with the transceiver 2.0 silicon |
| // and is provided for the world to use. It contains a list of all |
| // known overwrite values. Overwrite values are non-default register |
| // values that configure the transceiver device to a more optimally performing |
| // posture. It is expected that low level software (i.e. PHY) will |
| // consume this file as a #include, and transfer the contents to the |
| // the indicated addresses in the transceiver's memory space. This file has |
| // at least one required entry, that being its own version current version |
| // number, to be stored at transceiver's location 0x3B the |
| // OVERWRITES_VERSION_NUMBER register. The RAM register is provided in |
| // the transceiver address space to assist in future debug efforts. The |
| // analyst may read this location (once device has been booted with |
| // mysterious software) and have a good indication of what register |
| // overwrites were performed (with all versions of the overwrites.h file |
| // being archived forever at the Compass location shown above. |
| // |
| // The transceiver has an indirect register (IAR) space. Write access to this space |
| // requires 3 or more writes: |
| // 1st) the first write is an index value to the indirect (write Bit7=0, register access Bit 6=0) + 0x3E |
| // 2nd) IAR Register #0x00 - 0xFF. |
| // 3rd) The data to write |
| // nth) Burst mode additional data if required. |
| // |
| // Write access to direct space requires only a single address, data pair. |
| |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x0C}, //version 0C: new value for ACKDELAY targeting 198us (23 May, 2013, Larry Roshak) |
| {0x23, 0x17} //PA_PWR new default Power Step is "23" |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration |
| {0x52, 0x55}, //AGC_THR1 RSSI tune up |
| {0x53, 0x2D}, //AGC_THR2 RSSI tune up |
| {0x66, 0x5F}, //ATT_RSSI1 tune up |
| {0x67, 0x8F}, //ATT_RSSI2 tune up |
| {0x68, 0x61}, //RSSI_OFFSET |
| {0x78, 0x03}, //CHF_PMAGAIN |
| {0x22, 0x50}, //CCA1_THRESH |
| {0x4D, 0x13}, //CORR_NVAL moved from 0x14 to 0x13 for 0.5 dB improved Rx Sensitivity |
| {0x39, 0x3D} //ACKDELAY new value targeting a delay of 198us (23 May, 2013, Larry Roshak) |
| }; |
| |
| |
| /* begin of deprecated versions |
| |
| ==VERSION 1== |
| (version 1 is empty) |
| |
| ==VERSION 2== |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02} //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| }; |
| |
| ==VERSION 3== |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1: override VCOALC_REF_TX to 3 |
| {0x92, 0x07} //VCO_CTRL2: override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| }; |
| |
| ==VERSION 4== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x04} //version 04 is the current version: update PA_COILTUNING default |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1: override VCOALC_REF_TX to 3 |
| {0x92, 0x07} //VCO_CTRL2: override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71} //PA_TUNING: override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| }; |
| |
| ==VERSION 5== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x05} //version 05: updates Channel Filter Register set (21 Dec 2012, on behalf of S. Soca) |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07} //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71} //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F} //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F} //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24} //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24} //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24} //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24} //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24} //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24} //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32} //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D} //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D} //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| }; |
| |
| ==VERSION 6== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x06} //version 06: disable PA calibration |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07} //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71} //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F} //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F} //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24} //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24} //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24} //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24} //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24} //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24} //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32} //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D} //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D} //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x64, 0x28} //PA_CAL_DIS=1 Disabled PA calibration |
| }; |
| |
| ==VERSION 7== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x07} //version 07: updated registers for ED/RSSI |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration |
| {0x52, 0x73}, //AGC_THR1 RSSI tune up |
| {0x53, 0x2D}, //AGC_THR2 RSSI tune up |
| {0x66, 0x5F}, //ATT_RSSI1 tune up |
| {0x67, 0x8F}, //ATT_RSSI2 tune up |
| {0x68, 0x60}, //RSSI_OFFSET |
| {0x69, 0x65} //RSSI_SLOPE |
| }; |
| |
| |
| ==VERSION 8== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x08} //version 08: updated registers for ED/RSSI |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration |
| {0x52, 0x73}, //AGC_THR1 RSSI tune up |
| {0x53, 0x2D}, //AGC_THR2 RSSI tune up |
| {0x66, 0x5F}, //ATT_RSSI1 tune up |
| {0x67, 0x8F}, //ATT_RSSI2 tune up |
| {0x69, 0x65} //RSSI_SLOPE |
| {0x68, 0x61}, //RSSI_OFFSET |
| {0x78, 0x03} //CHF_PMAGAIN |
| }; |
| |
| |
| ==VERSION 9== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x09} //version 09: updated registers for ED/RSSI and PowerStep |
| {0x23, 0x17} //PA_PWR new default value |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration |
| {0x52, 0x55}, //AGC_THR1 RSSI tune up |
| {0x53, 0x2D}, //AGC_THR2 RSSI tune up |
| {0x66, 0x5F}, //ATT_RSSI1 tune up |
| {0x67, 0x8F}, //ATT_RSSI2 tune up |
| {0x68, 0x61}, //RSSI_OFFSET |
| {0x78, 0x03} //CHF_PMAGAIN |
| }; |
| |
| ==VERSION A== |
| overwrites_t const overwrites_direct[] ={ |
| {0x3B, 0x0A} //version 0A: updated registers for CCA |
| {0x23, 0x17} //PA_PWR new default Power Step is "23" |
| }; |
| |
| overwrites_t const overwrites_indirect[] ={ |
| {0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents) |
| {0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3 |
| {0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1 |
| {0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid) |
| {0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca) |
| {0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration |
| {0x52, 0x55}, //AGC_THR1 RSSI tune up |
| {0x53, 0x2D}, //AGC_THR2 RSSI tune up |
| {0x66, 0x5F}, //ATT_RSSI1 tune up |
| {0x67, 0x8F}, //ATT_RSSI2 tune up |
| {0x68, 0x61}, //RSSI_OFFSET |
| {0x78, 0x03} //CHF_PMAGAIN |
| {0x22, 0x50} //CCA1_THRESH |
| }; |
| |
| end of deprecated versions */ |
| |
| |
| #endif //OVERWRITES_H_ |
| |