/** | |
****************************************************************************** | |
* @file stm32f7xx_ll_tim.h | |
* @author MCD Application Team | |
* @version V1.2.0 | |
* @date 30-December-2016 | |
* @brief Header file of TIM LL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F7xx_LL_TIM_H | |
#define __STM32F7xx_LL_TIM_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f7xx.h" | |
/** @addtogroup STM32F7xx_LL_Driver | |
* @{ | |
*/ | |
#if defined (TIM1) || defined (TIM8) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM6) || defined (TIM7) | |
/** @defgroup TIM_LL TIM | |
* @{ | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/** @defgroup TIM_LL_Private_Variables TIM Private Variables | |
* @{ | |
*/ | |
static const uint8_t OFFSET_TAB_CCMRx[] = | |
{ | |
0x00U, /* 0: TIMx_CH1 */ | |
0x00U, /* 1: TIMx_CH1N */ | |
0x00U, /* 2: TIMx_CH2 */ | |
0x00U, /* 3: TIMx_CH2N */ | |
0x04U, /* 4: TIMx_CH3 */ | |
0x04U, /* 5: TIMx_CH3N */ | |
0x04U, /* 6: TIMx_CH4 */ | |
0x3CU, /* 7: TIMx_CH5 */ | |
0x3CU /* 8: TIMx_CH6 */ | |
}; | |
static const uint8_t SHIFT_TAB_OCxx[] = | |
{ | |
0U, /* 0: OC1M, OC1FE, OC1PE */ | |
0U, /* 1: - NA */ | |
8U, /* 2: OC2M, OC2FE, OC2PE */ | |
0U, /* 3: - NA */ | |
0U, /* 4: OC3M, OC3FE, OC3PE */ | |
0U, /* 5: - NA */ | |
8U, /* 6: OC4M, OC4FE, OC4PE */ | |
0U, /* 7: OC5M, OC5FE, OC5PE */ | |
8U /* 8: OC6M, OC6FE, OC6PE */ | |
}; | |
static const uint8_t SHIFT_TAB_ICxx[] = | |
{ | |
0U, /* 0: CC1S, IC1PSC, IC1F */ | |
0U, /* 1: - NA */ | |
8U, /* 2: CC2S, IC2PSC, IC2F */ | |
0U, /* 3: - NA */ | |
0U, /* 4: CC3S, IC3PSC, IC3F */ | |
0U, /* 5: - NA */ | |
8U, /* 6: CC4S, IC4PSC, IC4F */ | |
0U, /* 7: - NA */ | |
0U /* 8: - NA */ | |
}; | |
static const uint8_t SHIFT_TAB_CCxP[] = | |
{ | |
0U, /* 0: CC1P */ | |
2U, /* 1: CC1NP */ | |
4U, /* 2: CC2P */ | |
6U, /* 3: CC2NP */ | |
8U, /* 4: CC3P */ | |
10U, /* 5: CC3NP */ | |
12U, /* 6: CC4P */ | |
16U, /* 7: CC5P */ | |
20U /* 8: CC6P */ | |
}; | |
static const uint8_t SHIFT_TAB_OISx[] = | |
{ | |
0U, /* 0: OIS1 */ | |
1U, /* 1: OIS1N */ | |
2U, /* 2: OIS2 */ | |
3U, /* 3: OIS2N */ | |
4U, /* 4: OIS3 */ | |
5U, /* 5: OIS3N */ | |
6U, /* 6: OIS4 */ | |
8U, /* 7: OIS5 */ | |
10U /* 8: OIS6 */ | |
}; | |
/** | |
* @} | |
*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup TIM_LL_Private_Constants TIM Private Constants | |
* @{ | |
*/ | |
#if defined(TIM_BREAK_INPUT_SUPPORT) | |
/* Defines used for the bit position in the register and perform offsets */ | |
#define TIM_POSITION_BRK_SOURCE POSITION_VAL(Source) | |
/* Generic bit definitions for TIMx_AF1 register */ | |
#define TIMx_AF1_BKINE TIM1_AF1_BKINE /*!< BRK BKINE input enable */ | |
#if defined(DFSDM1_Channel0) | |
#define TIMx_AF1_BKDFBKE TIM1_AF1_BKDFBKE /*!< BRK DFSDM1_BREAK[0] enable */ | |
#endif /* DFSDM1_Channel0 */ | |
#define TIMx_AF1_BKINP TIM1_AF1_BKINP /*!< BRK BKIN input polarity */ | |
/* Generic bit definitions for TIMx_AF2 register */ | |
#define TIMx_AF2_BK2INE TIM1_AF2_BK2INE /*!< BRK B2KINE input enable */ | |
#if defined(DFSDM1_Channel0) | |
#define TIMx_AF2_BK2DFBKE TIM1_AF2_BK2DFBKE /*!< BRK DFSDM_BREAK[0] enable */ | |
#endif /* DFSDM1_Channel0 */ | |
#define TIMx_AF2_BK2INP TIM1_AF2_BK2INP /*!< BRK BK2IN input polarity */ | |
#endif /* TIM_BREAK_INPUT_SUPPORT */ | |
/* Remap mask definitions */ | |
#define TIMx_OR_RMP_SHIFT 16U | |
#define TIMx_OR_RMP_MASK 0x0000FFFFU | |
#define TIM2_OR_RMP_MASK (TIM2_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT) | |
#define TIM5_OR_RMP_MASK (TIM5_OR_TI4_RMP << TIMx_OR_RMP_SHIFT) | |
#define TIM11_OR_RMP_MASK (TIM11_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) | |
/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ | |
#define DT_DELAY_1 ((uint8_t)0x7FU) | |
#define DT_DELAY_2 ((uint8_t)0x3FU) | |
#define DT_DELAY_3 ((uint8_t)0x1FU) | |
#define DT_DELAY_4 ((uint8_t)0x1FU) | |
/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ | |
#define DT_RANGE_1 ((uint8_t)0x00U) | |
#define DT_RANGE_2 ((uint8_t)0x80U) | |
#define DT_RANGE_3 ((uint8_t)0xC0U) | |
#define DT_RANGE_4 ((uint8_t)0xE0U) | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup TIM_LL_Private_Macros TIM Private Macros | |
* @{ | |
*/ | |
/** @brief Convert channel id into channel index. | |
* @param __CHANNEL__ This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval none | |
*/ | |
#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ | |
(((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH4) ? 6U :\ | |
((__CHANNEL__) == LL_TIM_CHANNEL_CH5) ? 7U : 8U) | |
/** @brief Calculate the deadtime sampling period(in ps). | |
* @param __TIMCLK__ timer input clock frequency (in Hz). | |
* @param __CKD__ This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV1 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV2 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV4 | |
* @retval none | |
*/ | |
#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ | |
(((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ | |
((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ | |
((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) | |
/** | |
* @} | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
#if defined(USE_FULL_LL_DRIVER) | |
/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure | |
* @{ | |
*/ | |
/** | |
* @brief TIM Time Base configuration structure definition. | |
*/ | |
typedef struct | |
{ | |
uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. | |
This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/ | |
uint32_t CounterMode; /*!< Specifies the counter mode. | |
This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/ | |
uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active | |
Auto-Reload Register at the next update event. | |
This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. | |
Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/ | |
uint32_t ClockDivision; /*!< Specifies the clock division. | |
This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/ | |
uint8_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter | |
reaches zero, an update event is generated and counting restarts | |
from the RCR value (N). | |
This means in PWM mode that (N+1) corresponds to: | |
- the number of PWM periods in edge-aligned mode | |
- the number of half PWM period in center-aligned mode | |
This parameter must be a number between 0x00 and 0xFF. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/ | |
} LL_TIM_InitTypeDef; | |
/** | |
* @brief TIM Output Compare configuration structure definition. | |
*/ | |
typedef struct | |
{ | |
uint32_t OCMode; /*!< Specifies the output mode. | |
This parameter can be a value of @ref TIM_LL_EC_OCMODE. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/ | |
uint32_t OCState; /*!< Specifies the TIM Output Compare state. | |
This parameter can be a value of @ref TIM_LL_EC_OCSTATE. | |
This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ | |
uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. | |
This parameter can be a value of @ref TIM_LL_EC_OCSTATE. | |
This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ | |
uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. | |
This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. | |
This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/ | |
uint32_t OCPolarity; /*!< Specifies the output polarity. | |
This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ | |
uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. | |
This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ | |
uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. | |
This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/ | |
uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. | |
This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/ | |
} LL_TIM_OC_InitTypeDef; | |
/** | |
* @brief TIM Input Capture configuration structure definition. | |
*/ | |
typedef struct | |
{ | |
uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. | |
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ | |
uint32_t ICActiveInput; /*!< Specifies the input. | |
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ | |
uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. | |
This parameter can be a value of @ref TIM_LL_EC_ICPSC. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ | |
uint32_t ICFilter; /*!< Specifies the input capture filter. | |
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ | |
} LL_TIM_IC_InitTypeDef; | |
/** | |
* @brief TIM Encoder interface configuration structure definition. | |
*/ | |
typedef struct | |
{ | |
uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). | |
This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/ | |
uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. | |
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ | |
uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source | |
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ | |
uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. | |
This parameter can be a value of @ref TIM_LL_EC_ICPSC. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ | |
uint32_t IC1Filter; /*!< Specifies the TI1 input filter. | |
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ | |
uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. | |
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ | |
uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source | |
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ | |
uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. | |
This parameter can be a value of @ref TIM_LL_EC_ICPSC. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ | |
uint32_t IC2Filter; /*!< Specifies the TI2 input filter. | |
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ | |
} LL_TIM_ENCODER_InitTypeDef; | |
/** | |
* @brief TIM Hall sensor interface configuration structure definition. | |
*/ | |
typedef struct | |
{ | |
uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. | |
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ | |
uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. | |
Prescaler must be set to get a maximum counter period longer than the | |
time interval between 2 consecutive changes on the Hall inputs. | |
This parameter can be a value of @ref TIM_LL_EC_ICPSC. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ | |
uint32_t IC1Filter; /*!< Specifies the TI1 input filter. | |
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ | |
uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. | |
A positive pulse (TRGO event) is generated with a programmable delay every time | |
a change occurs on the Hall inputs. | |
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/ | |
} LL_TIM_HALLSENSOR_InitTypeDef; | |
/** | |
* @brief BDTR (Break and Dead Time) structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. | |
This parameter can be a value of @ref TIM_LL_EC_OSSR | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates() | |
@note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */ | |
uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. | |
This parameter can be a value of @ref TIM_LL_EC_OSSI | |
This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates() | |
@note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */ | |
uint32_t LockLevel; /*!< Specifies the LOCK level parameters. | |
This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL | |
@note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register | |
has been written, their content is frozen until the next reset.*/ | |
uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the | |
switching-on of the outputs. | |
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. | |
This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime() | |
@note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */ | |
uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. | |
This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE | |
This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. | |
This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY | |
This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
uint32_t BreakFilter; /*!< Specifies the TIM Break Filter. | |
This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER | |
This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
uint32_t Break2State; /*!< Specifies whether the TIM Break2 input is enabled or not. | |
This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE | |
This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
uint32_t Break2Polarity; /*!< Specifies the TIM Break2 Input pin polarity. | |
This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY | |
This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
uint32_t Break2Filter; /*!< Specifies the TIM Break2 Filter. | |
This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER | |
This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. | |
This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE | |
This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() | |
@note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ | |
} LL_TIM_BDTR_InitTypeDef; | |
/** | |
* @} | |
*/ | |
#endif /* USE_FULL_LL_DRIVER */ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants | |
* @{ | |
*/ | |
/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines | |
* @brief Flags defines which can be used with LL_TIM_ReadReg function. | |
* @{ | |
*/ | |
#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ | |
#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ | |
#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ | |
#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ | |
#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ | |
#define LL_TIM_SR_CC5IF TIM_SR_CC5IF /*!< Capture/compare 5 interrupt flag */ | |
#define LL_TIM_SR_CC6IF TIM_SR_CC6IF /*!< Capture/compare 6 interrupt flag */ | |
#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ | |
#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ | |
#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ | |
#define LL_TIM_SR_B2IF TIM_SR_B2IF /*!< Second break interrupt flag */ | |
#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ | |
#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ | |
#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ | |
#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ | |
#define LL_TIM_SR_SBIF TIM_SR_SBIF /*!< System Break interrupt flag */ | |
/** | |
* @} | |
*/ | |
#if defined(USE_FULL_LL_DRIVER) | |
/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable | |
* @{ | |
*/ | |
#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ | |
#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BREAK2_ENABLE Break2 Enable | |
* @{ | |
*/ | |
#define LL_TIM_BREAK2_DISABLE 0x00000000U /*!< Break2 function disabled */ | |
#define LL_TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break2 function enabled */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable | |
* @{ | |
*/ | |
#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ | |
#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ | |
/** | |
* @} | |
*/ | |
#endif /* USE_FULL_LL_DRIVER */ | |
/** @defgroup TIM_LL_EC_IT IT Defines | |
* @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. | |
* @{ | |
*/ | |
#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ | |
#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ | |
#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ | |
#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ | |
#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ | |
#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ | |
#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ | |
#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source | |
* @{ | |
*/ | |
#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ | |
#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode | |
* @{ | |
*/ | |
#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */ | |
#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode | |
* @{ | |
*/ | |
#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!<Counter used as upcounter */ | |
#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */ | |
#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */ | |
#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_1 /*!<The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */ | |
#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division | |
* @{ | |
*/ | |
#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */ | |
#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */ | |
#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction | |
* @{ | |
*/ | |
#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */ | |
#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source | |
* @{ | |
*/ | |
#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */ | |
#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request | |
* @{ | |
*/ | |
#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */ | |
#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level | |
* @{ | |
*/ | |
#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */ | |
#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ | |
#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ | |
#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_CHANNEL Channel | |
* @{ | |
*/ | |
#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */ | |
#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */ | |
#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */ | |
#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */ | |
#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */ | |
#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */ | |
#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */ | |
#define LL_TIM_CHANNEL_CH5 TIM_CCER_CC5E /*!< Timer output channel 5 */ | |
#define LL_TIM_CHANNEL_CH6 TIM_CCER_CC6E /*!< Timer output channel 6 */ | |
/** | |
* @} | |
*/ | |
#if defined(USE_FULL_LL_DRIVER) | |
/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State | |
* @{ | |
*/ | |
#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */ | |
#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */ | |
/** | |
* @} | |
*/ | |
#endif /* USE_FULL_LL_DRIVER */ | |
/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode | |
* @{ | |
*/ | |
#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!<The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the output channel level */ | |
#define LL_TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!<OCyREF is forced high on compare match*/ | |
#define LL_TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!<OCyREF is forced low on compare match*/ | |
#define LL_TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<OCyREF toggles on compare match*/ | |
#define LL_TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!<OCyREF is forced low*/ | |
#define LL_TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!<OCyREF is forced high*/ | |
#define LL_TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!<In upcounting, channel y is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel y is inactive as long as TIMx_CNT>TIMx_CCRy else active.*/ | |
#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<In upcounting, channel y is inactive as long as TIMx_CNT<TIMx_CCRy else active. In downcounting, channel y is active as long as TIMx_CNT>TIMx_CCRy else inactive*/ | |
#define LL_TIM_OCMODE_RETRIG_OPM1 TIM_CCMR1_OC1M_3 /*!<Retrigerrable OPM mode 1*/ | |
#define LL_TIM_OCMODE_RETRIG_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!<Retrigerrable OPM mode 2*/ | |
#define LL_TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!<Combined PWM mode 1*/ | |
#define LL_TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!<Combined PWM mode 2*/ | |
#define LL_TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!<Asymmetric PWM mode 1*/ | |
#define LL_TIM_OCMODE_ASSYMETRIC_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M) /*!<Asymmetric PWM mode 2*/ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity | |
* @{ | |
*/ | |
#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ | |
#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State | |
* @{ | |
*/ | |
#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!<OCx=0 (after a dead-time if OC is implemented) when MOE=0*/ | |
#define LL_TIM_OCIDLESTATE_HIGH TIM_CR2_OIS1 /*!<OCx=1 (after a dead-time if OC is implemented) when MOE=0*/ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_GROUPCH5 GROUPCH5 | |
* @{ | |
*/ | |
#define LL_TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ | |
#define LL_TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ | |
#define LL_TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ | |
#define LL_TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ACTIVEINPUT Active Input Selection | |
* @{ | |
*/ | |
#define LL_TIM_ACTIVEINPUT_DIRECTTI (TIM_CCMR1_CC1S_0 << 16U) /*!< ICx is mapped on TIx */ | |
#define LL_TIM_ACTIVEINPUT_INDIRECTTI (TIM_CCMR1_CC1S_1 << 16U) /*!< ICx is mapped on TIy */ | |
#define LL_TIM_ACTIVEINPUT_TRC (TIM_CCMR1_CC1S << 16U) /*!< ICx is mapped on TRC */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ICPSC Input Configuration Prescaler | |
* @{ | |
*/ | |
#define LL_TIM_ICPSC_DIV1 0x00000000U /*!< No prescaler, capture is done each time an edge is detected on the capture input */ | |
#define LL_TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0 << 16U) /*!< Capture is done once every 2 events */ | |
#define LL_TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1 << 16U) /*!< Capture is done once every 4 events */ | |
#define LL_TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC << 16U) /*!< Capture is done once every 8 events */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_IC_FILTER Input Configuration Filter | |
* @{ | |
*/ | |
#define LL_TIM_IC_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */ | |
#define LL_TIM_IC_FILTER_FDIV1_N2 (TIM_CCMR1_IC1F_0 << 16U) /*!< fSAMPLING=fCK_INT, N=2 */ | |
#define LL_TIM_IC_FILTER_FDIV1_N4 (TIM_CCMR1_IC1F_1 << 16U) /*!< fSAMPLING=fCK_INT, N=4 */ | |
#define LL_TIM_IC_FILTER_FDIV1_N8 ((TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fCK_INT, N=8 */ | |
#define LL_TIM_IC_FILTER_FDIV2_N6 (TIM_CCMR1_IC1F_2 << 16U) /*!< fSAMPLING=fDTS/2, N=6 */ | |
#define LL_TIM_IC_FILTER_FDIV2_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/2, N=8 */ | |
#define LL_TIM_IC_FILTER_FDIV4_N6 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/4, N=6 */ | |
#define LL_TIM_IC_FILTER_FDIV4_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/4, N=8 */ | |
#define LL_TIM_IC_FILTER_FDIV8_N6 (TIM_CCMR1_IC1F_3 << 16U) /*!< fSAMPLING=fDTS/8, N=6 */ | |
#define LL_TIM_IC_FILTER_FDIV8_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/8, N=8 */ | |
#define LL_TIM_IC_FILTER_FDIV16_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/16, N=5 */ | |
#define LL_TIM_IC_FILTER_FDIV16_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/16, N=6 */ | |
#define LL_TIM_IC_FILTER_FDIV16_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2) << 16U) /*!< fSAMPLING=fDTS/16, N=8 */ | |
#define LL_TIM_IC_FILTER_FDIV32_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/32, N=5 */ | |
#define LL_TIM_IC_FILTER_FDIV32_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/32, N=6 */ | |
#define LL_TIM_IC_FILTER_FDIV32_N8 (TIM_CCMR1_IC1F << 16U) /*!< fSAMPLING=fDTS/32, N=8 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_IC_POLARITY Input Configuration Polarity | |
* @{ | |
*/ | |
#define LL_TIM_IC_POLARITY_RISING 0x00000000U /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */ | |
#define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */ | |
#define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_CLOCKSOURCE Clock Source | |
* @{ | |
*/ | |
#define LL_TIM_CLOCKSOURCE_INTERNAL 0x00000000U /*!< The timer is clocked by the internal clock provided from the RCC */ | |
#define LL_TIM_CLOCKSOURCE_EXT_MODE1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Counter counts at each rising or falling edge on a selected inpu t*/ | |
#define LL_TIM_CLOCKSOURCE_EXT_MODE2 TIM_SMCR_ECE /*!< Counter counts at each rising or falling edge on the external trigger input ETR */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ENCODERMODE Encoder Mode | |
* @{ | |
*/ | |
#define LL_TIM_ENCODERMODE_X2_TI1 TIM_SMCR_SMS_0 /*!< Encoder mode 1 - Counter counts up/down on TI2FP2 edge depending on TI1FP1 level */ | |
#define LL_TIM_ENCODERMODE_X2_TI2 TIM_SMCR_SMS_1 /*!< Encoder mode 2 - Counter counts up/down on TI1FP1 edge depending on TI2FP2 level */ | |
#define LL_TIM_ENCODERMODE_X4_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input l */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_TRGO Trigger Output | |
* @{ | |
*/ | |
#define LL_TIM_TRGO_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output */ | |
#define LL_TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output */ | |
#define LL_TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output */ | |
#define LL_TIM_TRGO_CC1IF (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< CC1 capture or a compare match is used as trigger output */ | |
#define LL_TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output */ | |
#define LL_TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output */ | |
#define LL_TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output */ | |
#define LL_TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_TRGO2 Trigger Output 2 | |
* @{ | |
*/ | |
#define LL_TIM_TRGO2_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_CC1F (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< CC1 capture or a compare match is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC1 TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC2 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC3 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC4 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC5 TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC6 (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC4_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges are used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC6_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges are used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC4_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges are used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC4_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges are used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC5_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges are used as trigger output 2 */ | |
#define LL_TIM_TRGO2_OC5_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF rising or OC6REF falling edges are used as trigger output 2 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_SLAVEMODE Slave Mode | |
* @{ | |
*/ | |
#define LL_TIM_SLAVEMODE_DISABLED 0x00000000U /*!< Slave mode disabled */ | |
#define LL_TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter */ | |
#define LL_TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */ | |
#define LL_TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */ | |
#define LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter, generates an update of the registers and starts the counter */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_TS Trigger Selection | |
* @{ | |
*/ | |
#define LL_TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) is used as trigger input */ | |
#define LL_TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) is used as trigger input */ | |
#define LL_TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) is used as trigger input */ | |
#define LL_TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) is used as trigger input */ | |
#define LL_TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) is used as trigger input */ | |
#define LL_TIM_TS_TI1FP1 (TIM_SMCR_TS_2 | TIM_SMCR_TS_0) /*!< Filtered Timer Input 1 (TI1FP1) is used as trigger input */ | |
#define LL_TIM_TS_TI2FP2 (TIM_SMCR_TS_2 | TIM_SMCR_TS_1) /*!< Filtered Timer Input 2 (TI12P2) is used as trigger input */ | |
#define LL_TIM_TS_ETRF (TIM_SMCR_TS_2 | TIM_SMCR_TS_1 | TIM_SMCR_TS_0) /*!< Filtered external Trigger (ETRF) is used as trigger input */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ETR_POLARITY External Trigger Polarity | |
* @{ | |
*/ | |
#define LL_TIM_ETR_POLARITY_NONINVERTED 0x00000000U /*!< ETR is non-inverted, active at high level or rising edge */ | |
#define LL_TIM_ETR_POLARITY_INVERTED TIM_SMCR_ETP /*!< ETR is inverted, active at low level or falling edge */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ETR_PRESCALER External Trigger Prescaler | |
* @{ | |
*/ | |
#define LL_TIM_ETR_PRESCALER_DIV1 0x00000000U /*!< ETR prescaler OFF */ | |
#define LL_TIM_ETR_PRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR frequency is divided by 2 */ | |
#define LL_TIM_ETR_PRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR frequency is divided by 4 */ | |
#define LL_TIM_ETR_PRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR frequency is divided by 8 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_ETR_FILTER External Trigger Filter | |
* @{ | |
*/ | |
#define LL_TIM_ETR_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */ | |
#define LL_TIM_ETR_FILTER_FDIV1_N2 TIM_SMCR_ETF_0 /*!< fSAMPLING=fCK_INT, N=2 */ | |
#define LL_TIM_ETR_FILTER_FDIV1_N4 TIM_SMCR_ETF_1 /*!< fSAMPLING=fCK_INT, N=4 */ | |
#define LL_TIM_ETR_FILTER_FDIV1_N8 (TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fCK_INT, N=8 */ | |
#define LL_TIM_ETR_FILTER_FDIV2_N6 TIM_SMCR_ETF_2 /*!< fSAMPLING=fDTS/2, N=6 */ | |
#define LL_TIM_ETR_FILTER_FDIV2_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/2, N=8 */ | |
#define LL_TIM_ETR_FILTER_FDIV4_N6 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/4, N=6 */ | |
#define LL_TIM_ETR_FILTER_FDIV4_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/4, N=8 */ | |
#define LL_TIM_ETR_FILTER_FDIV8_N6 TIM_SMCR_ETF_3 /*!< fSAMPLING=fDTS/8, N=8 */ | |
#define LL_TIM_ETR_FILTER_FDIV8_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=5 */ | |
#define LL_TIM_ETR_FILTER_FDIV16_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/16, N=6 */ | |
#define LL_TIM_ETR_FILTER_FDIV16_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=8 */ | |
#define LL_TIM_ETR_FILTER_FDIV16_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2) /*!< fSAMPLING=fDTS/16, N=5 */ | |
#define LL_TIM_ETR_FILTER_FDIV32_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/32, N=5 */ | |
#define LL_TIM_ETR_FILTER_FDIV32_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/32, N=6 */ | |
#define LL_TIM_ETR_FILTER_FDIV32_N8 TIM_SMCR_ETF /*!< fSAMPLING=fDTS/32, N=8 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BREAK_POLARITY break polarity | |
* @{ | |
*/ | |
#define LL_TIM_BREAK_POLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ | |
#define LL_TIM_BREAK_POLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BREAK_FILTER break filter | |
* @{ | |
*/ | |
#define LL_TIM_BREAK_FILTER_FDIV1 0x00000000U /*!< No filter, BRK acts asynchronously */ | |
#define LL_TIM_BREAK_FILTER_FDIV1_N2 0x00010000U /*!< fSAMPLING=fCK_INT, N=2 */ | |
#define LL_TIM_BREAK_FILTER_FDIV1_N4 0x00020000U /*!< fSAMPLING=fCK_INT, N=4 */ | |
#define LL_TIM_BREAK_FILTER_FDIV1_N8 0x00030000U /*!< fSAMPLING=fCK_INT, N=8 */ | |
#define LL_TIM_BREAK_FILTER_FDIV2_N6 0x00040000U /*!< fSAMPLING=fDTS/2, N=6 */ | |
#define LL_TIM_BREAK_FILTER_FDIV2_N8 0x00050000U /*!< fSAMPLING=fDTS/2, N=8 */ | |
#define LL_TIM_BREAK_FILTER_FDIV4_N6 0x00060000U /*!< fSAMPLING=fDTS/4, N=6 */ | |
#define LL_TIM_BREAK_FILTER_FDIV4_N8 0x00070000U /*!< fSAMPLING=fDTS/4, N=8 */ | |
#define LL_TIM_BREAK_FILTER_FDIV8_N6 0x00080000U /*!< fSAMPLING=fDTS/8, N=6 */ | |
#define LL_TIM_BREAK_FILTER_FDIV8_N8 0x00090000U /*!< fSAMPLING=fDTS/8, N=8 */ | |
#define LL_TIM_BREAK_FILTER_FDIV16_N5 0x000A0000U /*!< fSAMPLING=fDTS/16, N=5 */ | |
#define LL_TIM_BREAK_FILTER_FDIV16_N6 0x000B0000U /*!< fSAMPLING=fDTS/16, N=6 */ | |
#define LL_TIM_BREAK_FILTER_FDIV16_N8 0x000C0000U /*!< fSAMPLING=fDTS/16, N=8 */ | |
#define LL_TIM_BREAK_FILTER_FDIV32_N5 0x000D0000U /*!< fSAMPLING=fDTS/32, N=5 */ | |
#define LL_TIM_BREAK_FILTER_FDIV32_N6 0x000E0000U /*!< fSAMPLING=fDTS/32, N=6 */ | |
#define LL_TIM_BREAK_FILTER_FDIV32_N8 0x000F0000U /*!< fSAMPLING=fDTS/32, N=8 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BREAK2_POLARITY BREAK2 POLARITY | |
* @{ | |
*/ | |
#define LL_TIM_BREAK2_POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ | |
#define LL_TIM_BREAK2_POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BREAK2_FILTER BREAK2 FILTER | |
* @{ | |
*/ | |
#define LL_TIM_BREAK2_FILTER_FDIV1 0x00000000U /*!< No filter, BRK acts asynchronously */ | |
#define LL_TIM_BREAK2_FILTER_FDIV1_N2 0x00100000U /*!< fSAMPLING=fCK_INT, N=2 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV1_N4 0x00200000U /*!< fSAMPLING=fCK_INT, N=4 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV1_N8 0x00300000U /*!< fSAMPLING=fCK_INT, N=8 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV2_N6 0x00400000U /*!< fSAMPLING=fDTS/2, N=6 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV2_N8 0x00500000U /*!< fSAMPLING=fDTS/2, N=8 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV4_N6 0x00600000U /*!< fSAMPLING=fDTS/4, N=6 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV4_N8 0x00700000U /*!< fSAMPLING=fDTS/4, N=8 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV8_N6 0x00800000U /*!< fSAMPLING=fDTS/8, N=6 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV8_N8 0x00900000U /*!< fSAMPLING=fDTS/8, N=8 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV16_N5 0x00A00000U /*!< fSAMPLING=fDTS/16, N=5 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV16_N6 0x00B00000U /*!< fSAMPLING=fDTS/16, N=6 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV16_N8 0x00C00000U /*!< fSAMPLING=fDTS/16, N=8 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV32_N5 0x00D00000U /*!< fSAMPLING=fDTS/32, N=5 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV32_N6 0x00E00000U /*!< fSAMPLING=fDTS/32, N=6 */ | |
#define LL_TIM_BREAK2_FILTER_FDIV32_N8 0x00F00000U /*!< fSAMPLING=fDTS/32, N=8 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_OSSI OSSI | |
* @{ | |
*/ | |
#define LL_TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */ | |
#define LL_TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OxC/OCxN outputs are first forced with their inactive level then forced to their idle level after the deadtime */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_OSSR OSSR | |
* @{ | |
*/ | |
#define LL_TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */ | |
#define LL_TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled with their inactive level as soon as CCxE=1 or CCxNE=1 */ | |
/** | |
* @} | |
*/ | |
#if defined(TIM_BREAK_INPUT_SUPPORT) | |
/** @defgroup TIM_LL_EC_BREAK_INPUT BREAK INPUT | |
* @{ | |
*/ | |
#define LL_TIM_BREAK_INPUT_BKIN 0x00000000U /*!< TIMx_BKIN input */ | |
#define LL_TIM_BREAK_INPUT_BKIN2 0x00000004U /*!< TIMx_BKIN2 input */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BKIN_SOURCE BKIN SOURCE | |
* @{ | |
*/ | |
#define LL_TIM_BKIN_SOURCE_BKIN TIM1_AF1_BKINE /*!< BKIN input from AF controller */ | |
#define LL_TIM_BKIN_SOURCE_DF1BK TIM1_AF1_BKDF1BKE /*!< internal signal: DFSDM1 break output */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_BKIN_POLARITY BKIN POLARITY | |
* @{ | |
*/ | |
#define LL_TIM_BKIN_POLARITY_LOW TIM1_AF1_BKINP /*!< BRK BKIN input is active low */ | |
#define LL_TIM_BKIN_POLARITY_HIGH 0x00000000U /*!< BRK BKIN input is active high */ | |
/** | |
* @} | |
*/ | |
#endif /* TIM_BREAK_INPUT_SUPPORT */ | |
/** @defgroup TIM_LL_EC_DMABURST_BASEADDR DMA Burst Base Address | |
* @{ | |
*/ | |
#define LL_TIM_DMABURST_BASEADDR_CR1 0x00000000U /*!< TIMx_CR1 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CR2 TIM_DCR_DBA_0 /*!< TIMx_CR2 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_SMCR TIM_DCR_DBA_1 /*!< TIMx_SMCR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_DIER (TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_DIER register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_SR TIM_DCR_DBA_2 /*!< TIMx_SR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_EGR (TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_EGR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCMR1 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCMR1 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCMR2 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCMR2 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCER TIM_DCR_DBA_3 /*!< TIMx_CCER register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CNT (TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_CNT register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_PSC (TIM_DCR_DBA_3 | TIM_DCR_DBA_1) /*!< TIMx_PSC register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_ARR (TIM_DCR_DBA_3 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_ARR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_RCR (TIM_DCR_DBA_3 | TIM_DCR_DBA_2) /*!< TIMx_RCR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCR1 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCR1 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCR2 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR2 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCR3 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR3 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCR4 TIM_DCR_DBA_4 /*!< TIMx_CCR4 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_BDTR (TIM_DCR_DBA_4 | TIM_DCR_DBA_0) /*!< TIMx_BDTR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCMR3 (TIM_DCR_DBA_4 | TIM_DCR_DBA_1) /*!< TIMx_CCMR3 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCR5 (TIM_DCR_DBA_4 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR5 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_CCR6 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2) /*!< TIMx_CCR6 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_OR (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_OR register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_AF1 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_AF1 register is the DMA base address for DMA burst */ | |
#define LL_TIM_DMABURST_BASEADDR_AF2 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_AF2 register is the DMA base address for DMA burst */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_DMABURST_LENGTH DMA Burst Length | |
* @{ | |
*/ | |
#define LL_TIM_DMABURST_LENGTH_1TRANSFER 0x00000000U /*!< Transfer is done to 1 register starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_2TRANSFERS TIM_DCR_DBL_0 /*!< Transfer is done to 2 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_3TRANSFERS TIM_DCR_DBL_1 /*!< Transfer is done to 3 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_4TRANSFERS (TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 4 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_5TRANSFERS TIM_DCR_DBL_2 /*!< Transfer is done to 5 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_6TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 6 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_7TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 7 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_8TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 1 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_9TRANSFERS TIM_DCR_DBL_3 /*!< Transfer is done to 9 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_10TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_0) /*!< Transfer is done to 10 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_11TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1) /*!< Transfer is done to 11 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_12TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 12 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_13TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2) /*!< Transfer is done to 13 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_14TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 14 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_15TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 15 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_16TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 16 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_17TRANSFERS TIM_DCR_DBL_4 /*!< Transfer is done to 17 registers starting from the DMA burst base address */ | |
#define LL_TIM_DMABURST_LENGTH_18TRANSFERS (TIM_DCR_DBL_4 | TIM_DCR_DBL_0) /*!< Transfer is done to 18 registers starting from the DMA burst base address */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_TIM2_ITR1_RMP_TIM8 TIM2 Internal Trigger1 Remap TIM8 | |
* @{ | |
*/ | |
#define LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO TIM2_OR_RMP_MASK /*!< TIM2_ITR1 is connected to TIM8_TRGO */ | |
#define LL_TIM_TIM2_ITR1_RMP_ETH_PTP (TIM2_OR_ITR1_RMP_0 | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to ETH_PTP */ | |
#define LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF (TIM2_OR_ITR1_RMP_1 | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_FS SOF */ | |
#define LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF (TIM2_OR_ITR1_RMP | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_HS SOF */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_TIM5_TI4_RMP TIM5 External Input Ch4 Remap | |
* @{ | |
*/ | |
#define LL_TIM_TIM5_TI4_RMP_GPIO TIM5_OR_RMP_MASK /*!< TIM5 channel 4 is connected to GPIO */ | |
#define LL_TIM_TIM5_TI4_RMP_LSI (TIM5_OR_TI4_RMP_0 | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to LSI internal clock */ | |
#define LL_TIM_TIM5_TI4_RMP_LSE (TIM5_OR_TI4_RMP_1 | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to LSE */ | |
#define LL_TIM_TIM5_TI4_RMP_RTC (TIM5_OR_TI4_RMP | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to RTC wakeup interrupt */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EC_TIM11_TI1_RMP TIM11 External Input Capture 1 Remap | |
* @{ | |
*/ | |
#define LL_TIM_TIM11_TI1_RMP_GPIO TIM11_OR_RMP_MASK /*!< TIM11 channel 1 is connected to GPIO */ | |
#define LL_TIM_TIM11_TI1_RMP_SPDIFRX (TIM11_OR_TI1_RMP_0 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to SPDIFRX */ | |
#define LL_TIM_TIM11_TI1_RMP_HSE (TIM11_OR_TI1_RMP_1 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to HSE */ | |
#define LL_TIM_TIM11_TI1_RMP_MCO1 (TIM11_OR_TI1_RMP | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to MCO1 */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup TIM_LL_Exported_Macros TIM Exported Macros | |
* @{ | |
*/ | |
/** @defgroup TIM_LL_EM_WRITE_READ Common Write and read registers Macros | |
* @{ | |
*/ | |
/** | |
* @brief Write a value in TIM register. | |
* @param __INSTANCE__ TIM Instance | |
* @param __REG__ Register to be written | |
* @param __VALUE__ Value to be written in the register | |
* @retval None | |
*/ | |
#define LL_TIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) | |
/** | |
* @brief Read a value in TIM register. | |
* @param __INSTANCE__ TIM Instance | |
* @param __REG__ Register to be read | |
* @retval Register value | |
*/ | |
#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros | |
* @{ | |
*/ | |
/** | |
* @brief HELPER macro retrieving the UIFCPY flag from the counter value. | |
* @note ex: @ref __LL_TIM_GETFLAG_UIFCPY (@ref LL_TIM_GetCounter ()); | |
* @note Relevant only if UIF flag remapping has been enabled (UIF status bit is copied | |
* to TIMx_CNT register bit 31) | |
* @param __CNT__ Counter value | |
* @retval UIF status bit | |
*/ | |
#define __LL_TIM_GETFLAG_UIFCPY(__CNT__) \ | |
(READ_BIT((__CNT__), TIM_CNT_UIFCPY) >> TIM_CNT_UIFCPY_Pos) | |
/** | |
* @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. | |
* @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); | |
* @param __TIMCLK__ timer input clock frequency (in Hz) | |
* @param __CKD__ This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV1 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV2 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV4 | |
* @param __DT__ deadtime duration (in ns) | |
* @retval DTG[0:7] | |
*/ | |
#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ | |
( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ | |
(((uint64_t)((__DT__)*1000U)) < (64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64U) & DT_DELAY_2)) :\ | |
(((uint64_t)((__DT__)*1000U)) < (32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32U) & DT_DELAY_3)) :\ | |
(((uint64_t)((__DT__)*1000U)) < (32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32U) & DT_DELAY_4)) :\ | |
0U) | |
/** | |
* @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. | |
* @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); | |
* @param __TIMCLK__ timer input clock frequency (in Hz) | |
* @param __CNTCLK__ counter clock frequency (in Hz) | |
* @retval Prescaler value (between Min_Data=0 and Max_Data=65535) | |
*/ | |
#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ | |
((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((__TIMCLK__)/(__CNTCLK__) - 1U) : 0U | |
/** | |
* @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. | |
* @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); | |
* @param __TIMCLK__ timer input clock frequency (in Hz) | |
* @param __PSC__ prescaler | |
* @param __FREQ__ output signal frequency (in Hz) | |
* @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) | |
*/ | |
#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ | |
(((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? ((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U)) - 1U) : 0U | |
/** | |
* @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay. | |
* @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); | |
* @param __TIMCLK__ timer input clock frequency (in Hz) | |
* @param __PSC__ prescaler | |
* @param __DELAY__ timer output compare active/inactive delay (in us) | |
* @retval Compare value (between Min_Data=0 and Max_Data=65535) | |
*/ | |
#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ | |
((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ | |
/ ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) | |
/** | |
* @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode). | |
* @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); | |
* @param __TIMCLK__ timer input clock frequency (in Hz) | |
* @param __PSC__ prescaler | |
* @param __DELAY__ timer output compare active/inactive delay (in us) | |
* @param __PULSE__ pulse duration (in us) | |
* @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) | |
*/ | |
#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ | |
((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ | |
+ __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) | |
/** | |
* @brief HELPER macro retrieving the ratio of the input capture prescaler | |
* @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); | |
* @param __ICPSC__ This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ICPSC_DIV1 | |
* @arg @ref LL_TIM_ICPSC_DIV2 | |
* @arg @ref LL_TIM_ICPSC_DIV4 | |
* @arg @ref LL_TIM_ICPSC_DIV8 | |
* @retval Input capture prescaler ratio (1, 2, 4 or 8) | |
*/ | |
#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ | |
((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions | |
* @{ | |
*/ | |
/** @defgroup TIM_LL_EF_Time_Base Time Base configuration | |
* @{ | |
*/ | |
/** | |
* @brief Enable timer counter. | |
* @rmtoll CR1 CEN LL_TIM_EnableCounter | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->CR1, TIM_CR1_CEN); | |
} | |
/** | |
* @brief Disable timer counter. | |
* @rmtoll CR1 CEN LL_TIM_DisableCounter | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); | |
} | |
/** | |
* @brief Indicates whether the timer counter is enabled. | |
* @rmtoll CR1 CEN LL_TIM_IsEnabledCounter | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)); | |
} | |
/** | |
* @brief Enable update event generation. | |
* @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->CR1, TIM_CR1_UDIS); | |
} | |
/** | |
* @brief Disable update event generation. | |
* @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); | |
} | |
/** | |
* @brief Indicates whether update event generation is enabled. | |
* @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (TIM_CR1_UDIS)); | |
} | |
/** | |
* @brief Set update event source | |
* @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events | |
* generate an update interrupt or DMA request if enabled: | |
* - Counter overflow/underflow | |
* - Setting the UG bit | |
* - Update generation through the slave mode controller | |
* @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter | |
* overflow/underflow generates an update interrupt or DMA request if enabled. | |
* @rmtoll CR1 URS LL_TIM_SetUpdateSource | |
* @param TIMx Timer instance | |
* @param UpdateSource This parameter can be one of the following values: | |
* @arg @ref LL_TIM_UPDATESOURCE_REGULAR | |
* @arg @ref LL_TIM_UPDATESOURCE_COUNTER | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) | |
{ | |
MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); | |
} | |
/** | |
* @brief Get actual event update source | |
* @rmtoll CR1 URS LL_TIM_GetUpdateSource | |
* @param TIMx Timer instance | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_UPDATESOURCE_REGULAR | |
* @arg @ref LL_TIM_UPDATESOURCE_COUNTER | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); | |
} | |
/** | |
* @brief Set one pulse mode (one shot v.s. repetitive). | |
* @rmtoll CR1 OPM LL_TIM_SetOnePulseMode | |
* @param TIMx Timer instance | |
* @param OnePulseMode This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ONEPULSEMODE_SINGLE | |
* @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) | |
{ | |
MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); | |
} | |
/** | |
* @brief Get actual one pulse mode. | |
* @rmtoll CR1 OPM LL_TIM_GetOnePulseMode | |
* @param TIMx Timer instance | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_ONEPULSEMODE_SINGLE | |
* @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); | |
} | |
/** | |
* @brief Set the timer counter counting mode. | |
* @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to | |
* check whether or not the counter mode selection feature is supported | |
* by a timer instance. | |
* @rmtoll CR1 DIR LL_TIM_SetCounterMode\n | |
* CR1 CMS LL_TIM_SetCounterMode | |
* @param TIMx Timer instance | |
* @param CounterMode This parameter can be one of the following values: | |
* @arg @ref LL_TIM_COUNTERMODE_UP | |
* @arg @ref LL_TIM_COUNTERMODE_DOWN | |
* @arg @ref LL_TIM_COUNTERMODE_CENTER_UP | |
* @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN | |
* @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) | |
{ | |
MODIFY_REG(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS, CounterMode); | |
} | |
/** | |
* @brief Get actual counter mode. | |
* @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to | |
* check whether or not the counter mode selection feature is supported | |
* by a timer instance. | |
* @rmtoll CR1 DIR LL_TIM_GetCounterMode\n | |
* CR1 CMS LL_TIM_GetCounterMode | |
* @param TIMx Timer instance | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_COUNTERMODE_UP | |
* @arg @ref LL_TIM_COUNTERMODE_DOWN | |
* @arg @ref LL_TIM_COUNTERMODE_CENTER_UP | |
* @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN | |
* @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS)); | |
} | |
/** | |
* @brief Enable auto-reload (ARR) preload. | |
* @rmtoll CR1 ARPE LL_TIM_EnableARRPreload | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->CR1, TIM_CR1_ARPE); | |
} | |
/** | |
* @brief Disable auto-reload (ARR) preload. | |
* @rmtoll CR1 ARPE LL_TIM_DisableARRPreload | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); | |
} | |
/** | |
* @brief Indicates whether auto-reload (ARR) preload is enabled. | |
* @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)); | |
} | |
/** | |
* @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. | |
* @note Macro @ref IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check | |
* whether or not the clock division feature is supported by the timer | |
* instance. | |
* @rmtoll CR1 CKD LL_TIM_SetClockDivision | |
* @param TIMx Timer instance | |
* @param ClockDivision This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV1 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV2 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV4 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) | |
{ | |
MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); | |
} | |
/** | |
* @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. | |
* @note Macro @ref IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check | |
* whether or not the clock division feature is supported by the timer | |
* instance. | |
* @rmtoll CR1 CKD LL_TIM_GetClockDivision | |
* @param TIMx Timer instance | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV1 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV2 | |
* @arg @ref LL_TIM_CLOCKDIVISION_DIV4 | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); | |
} | |
/** | |
* @brief Set the counter value. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @rmtoll CNT CNT LL_TIM_SetCounter | |
* @param TIMx Timer instance | |
* @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) | |
{ | |
WRITE_REG(TIMx->CNT, Counter); | |
} | |
/** | |
* @brief Get the counter value. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @rmtoll CNT CNT LL_TIM_GetCounter | |
* @param TIMx Timer instance | |
* @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CNT)); | |
} | |
/** | |
* @brief Get the current direction of the counter | |
* @rmtoll CR1 DIR LL_TIM_GetDirection | |
* @param TIMx Timer instance | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_COUNTERDIRECTION_UP | |
* @arg @ref LL_TIM_COUNTERDIRECTION_DOWN | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); | |
} | |
/** | |
* @brief Set the prescaler value. | |
* @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). | |
* @note The prescaler can be changed on the fly as this control register is buffered. The new | |
* prescaler ratio is taken into account at the next update event. | |
* @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter | |
* @rmtoll PSC PSC LL_TIM_SetPrescaler | |
* @param TIMx Timer instance | |
* @param Prescaler between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) | |
{ | |
WRITE_REG(TIMx->PSC, Prescaler); | |
} | |
/** | |
* @brief Get the prescaler value. | |
* @rmtoll PSC PSC LL_TIM_GetPrescaler | |
* @param TIMx Timer instance | |
* @retval Prescaler value between Min_Data=0 and Max_Data=65535 | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->PSC)); | |
} | |
/** | |
* @brief Set the auto-reload value. | |
* @note The counter is blocked while the auto-reload value is null. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter | |
* @rmtoll ARR ARR LL_TIM_SetAutoReload | |
* @param TIMx Timer instance | |
* @param AutoReload between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) | |
{ | |
WRITE_REG(TIMx->ARR, AutoReload); | |
} | |
/** | |
* @brief Get the auto-reload value. | |
* @rmtoll ARR ARR LL_TIM_GetAutoReload | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @param TIMx Timer instance | |
* @retval Auto-reload value | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->ARR)); | |
} | |
/** | |
* @brief Set the repetition counter value. | |
* @note For advanced timer instances RepetitionCounter can be up to 65535. | |
* @note Macro @ref IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a repetition counter. | |
* @rmtoll RCR REP LL_TIM_SetRepetitionCounter | |
* @param TIMx Timer instance | |
* @param RepetitionCounter between Min_Data=0 and Max_Data=255 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) | |
{ | |
WRITE_REG(TIMx->RCR, RepetitionCounter); | |
} | |
/** | |
* @brief Get the repetition counter value. | |
* @note Macro @ref IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a repetition counter. | |
* @rmtoll RCR REP LL_TIM_GetRepetitionCounter | |
* @param TIMx Timer instance | |
* @retval Repetition counter value | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->RCR)); | |
} | |
/** | |
* @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). | |
* @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way. | |
* @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableUIFRemap(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); | |
} | |
/** | |
* @brief Disable update interrupt flag (UIF) remapping. | |
* @rmtoll CR1 UIFREMAP LL_TIM_DisableUIFRemap | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration | |
* @{ | |
*/ | |
/** | |
* @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. | |
* @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, | |
* they are updated only when a commutation event (COM) occurs. | |
* @note Only on channels that have a complementary output. | |
* @note Macro @ref IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance is able to generate a commutation event. | |
* @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->CR2, TIM_CR2_CCPC); | |
} | |
/** | |
* @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. | |
* @note Macro @ref IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance is able to generate a commutation event. | |
* @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); | |
} | |
/** | |
* @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). | |
* @note Macro @ref IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance is able to generate a commutation event. | |
* @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate | |
* @param TIMx Timer instance | |
* @param CCUpdateSource This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY | |
* @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) | |
{ | |
MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); | |
} | |
/** | |
* @brief Set the trigger of the capture/compare DMA request. | |
* @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger | |
* @param TIMx Timer instance | |
* @param DMAReqTrigger This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CCDMAREQUEST_CC | |
* @arg @ref LL_TIM_CCDMAREQUEST_UPDATE | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) | |
{ | |
MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); | |
} | |
/** | |
* @brief Get actual trigger of the capture/compare DMA request. | |
* @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger | |
* @param TIMx Timer instance | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_CCDMAREQUEST_CC | |
* @arg @ref LL_TIM_CCDMAREQUEST_UPDATE | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); | |
} | |
/** | |
* @brief Set the lock level to freeze the | |
* configuration of several capture/compare parameters. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* the lock mechanism is supported by a timer instance. | |
* @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel | |
* @param TIMx Timer instance | |
* @param LockLevel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_LOCKLEVEL_OFF | |
* @arg @ref LL_TIM_LOCKLEVEL_1 | |
* @arg @ref LL_TIM_LOCKLEVEL_2 | |
* @arg @ref LL_TIM_LOCKLEVEL_3 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) | |
{ | |
MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); | |
} | |
/** | |
* @brief Enable capture/compare channels. | |
* @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n | |
* CCER CC1NE LL_TIM_CC_EnableChannel\n | |
* CCER CC2E LL_TIM_CC_EnableChannel\n | |
* CCER CC2NE LL_TIM_CC_EnableChannel\n | |
* CCER CC3E LL_TIM_CC_EnableChannel\n | |
* CCER CC3NE LL_TIM_CC_EnableChannel\n | |
* CCER CC4E LL_TIM_CC_EnableChannel\n | |
* CCER CC5E LL_TIM_CC_EnableChannel\n | |
* CCER CC6E LL_TIM_CC_EnableChannel | |
* @param TIMx Timer instance | |
* @param Channels This parameter can be a combination of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) | |
{ | |
SET_BIT(TIMx->CCER, Channels); | |
} | |
/** | |
* @brief Disable capture/compare channels. | |
* @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n | |
* CCER CC1NE LL_TIM_CC_DisableChannel\n | |
* CCER CC2E LL_TIM_CC_DisableChannel\n | |
* CCER CC2NE LL_TIM_CC_DisableChannel\n | |
* CCER CC3E LL_TIM_CC_DisableChannel\n | |
* CCER CC3NE LL_TIM_CC_DisableChannel\n | |
* CCER CC4E LL_TIM_CC_DisableChannel\n | |
* CCER CC5E LL_TIM_CC_DisableChannel\n | |
* CCER CC6E LL_TIM_CC_DisableChannel | |
* @param TIMx Timer instance | |
* @param Channels This parameter can be a combination of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) | |
{ | |
CLEAR_BIT(TIMx->CCER, Channels); | |
} | |
/** | |
* @brief Indicate whether channel(s) is(are) enabled. | |
* @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC1NE LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC2E LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC2NE LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC3E LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC3NE LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC4E LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC5E LL_TIM_CC_IsEnabledChannel\n | |
* CCER CC6E LL_TIM_CC_IsEnabledChannel | |
* @param TIMx Timer instance | |
* @param Channels This parameter can be a combination of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) | |
{ | |
return (READ_BIT(TIMx->CCER, Channels) == (Channels)); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration | |
* @{ | |
*/ | |
/** | |
* @brief Configure an output channel. | |
* @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n | |
* CCMR1 CC2S LL_TIM_OC_ConfigOutput\n | |
* CCMR2 CC3S LL_TIM_OC_ConfigOutput\n | |
* CCMR2 CC4S LL_TIM_OC_ConfigOutput\n | |
* CCMR3 CC5S LL_TIM_OC_ConfigOutput\n | |
* CCMR3 CC6S LL_TIM_OC_ConfigOutput\n | |
* CCER CC1P LL_TIM_OC_ConfigOutput\n | |
* CCER CC2P LL_TIM_OC_ConfigOutput\n | |
* CCER CC3P LL_TIM_OC_ConfigOutput\n | |
* CCER CC4P LL_TIM_OC_ConfigOutput\n | |
* CCER CC5P LL_TIM_OC_ConfigOutput\n | |
* CCER CC6P LL_TIM_OC_ConfigOutput\n | |
* CR2 OIS1 LL_TIM_OC_ConfigOutput\n | |
* CR2 OIS2 LL_TIM_OC_ConfigOutput\n | |
* CR2 OIS3 LL_TIM_OC_ConfigOutput\n | |
* CR2 OIS4 LL_TIM_OC_ConfigOutput\n | |
* CR2 OIS5 LL_TIM_OC_ConfigOutput\n | |
* CR2 OIS6 LL_TIM_OC_ConfigOutput | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @param Configuration This parameter must be a combination of all the following values: | |
* @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW | |
* @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); | |
MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), | |
(Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); | |
MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), | |
(Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); | |
} | |
/** | |
* @brief Define the behavior of the output reference signal OCxREF from which | |
* OCx and OCxN (when relevant) are derived. | |
* @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n | |
* CCMR1 OC2M LL_TIM_OC_SetMode\n | |
* CCMR2 OC3M LL_TIM_OC_SetMode\n | |
* CCMR2 OC4M LL_TIM_OC_SetMode\n | |
* CCMR3 OC5M LL_TIM_OC_SetMode\n | |
* CCMR3 OC6M LL_TIM_OC_SetMode | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @param Mode This parameter can be one of the following values: | |
* @arg @ref LL_TIM_OCMODE_FROZEN | |
* @arg @ref LL_TIM_OCMODE_ACTIVE | |
* @arg @ref LL_TIM_OCMODE_INACTIVE | |
* @arg @ref LL_TIM_OCMODE_TOGGLE | |
* @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE | |
* @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE | |
* @arg @ref LL_TIM_OCMODE_PWM1 | |
* @arg @ref LL_TIM_OCMODE_PWM2 | |
* @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 | |
* @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 | |
* @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 | |
* @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 | |
* @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM1 | |
* @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM2 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); | |
} | |
/** | |
* @brief Get the output compare mode of an output channel. | |
* @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n | |
* CCMR1 OC2M LL_TIM_OC_GetMode\n | |
* CCMR2 OC3M LL_TIM_OC_GetMode\n | |
* CCMR2 OC4M LL_TIM_OC_GetMode\n | |
* CCMR3 OC5M LL_TIM_OC_GetMode\n | |
* CCMR3 OC6M LL_TIM_OC_GetMode | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_OCMODE_FROZEN | |
* @arg @ref LL_TIM_OCMODE_ACTIVE | |
* @arg @ref LL_TIM_OCMODE_INACTIVE | |
* @arg @ref LL_TIM_OCMODE_TOGGLE | |
* @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE | |
* @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE | |
* @arg @ref LL_TIM_OCMODE_PWM1 | |
* @arg @ref LL_TIM_OCMODE_PWM2 | |
* @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 | |
* @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 | |
* @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 | |
* @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 | |
* @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM1 | |
* @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM2 | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); | |
} | |
/** | |
* @brief Set the polarity of an output channel. | |
* @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n | |
* CCER CC1NP LL_TIM_OC_SetPolarity\n | |
* CCER CC2P LL_TIM_OC_SetPolarity\n | |
* CCER CC2NP LL_TIM_OC_SetPolarity\n | |
* CCER CC3P LL_TIM_OC_SetPolarity\n | |
* CCER CC3NP LL_TIM_OC_SetPolarity\n | |
* CCER CC4P LL_TIM_OC_SetPolarity\n | |
* CCER CC5P LL_TIM_OC_SetPolarity\n | |
* CCER CC6P LL_TIM_OC_SetPolarity | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @param Polarity This parameter can be one of the following values: | |
* @arg @ref LL_TIM_OCPOLARITY_HIGH | |
* @arg @ref LL_TIM_OCPOLARITY_LOW | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); | |
} | |
/** | |
* @brief Get the polarity of an output channel. | |
* @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n | |
* CCER CC1NP LL_TIM_OC_GetPolarity\n | |
* CCER CC2P LL_TIM_OC_GetPolarity\n | |
* CCER CC2NP LL_TIM_OC_GetPolarity\n | |
* CCER CC3P LL_TIM_OC_GetPolarity\n | |
* CCER CC3NP LL_TIM_OC_GetPolarity\n | |
* CCER CC4P LL_TIM_OC_GetPolarity\n | |
* CCER CC5P LL_TIM_OC_GetPolarity\n | |
* CCER CC6P LL_TIM_OC_GetPolarity | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_OCPOLARITY_HIGH | |
* @arg @ref LL_TIM_OCPOLARITY_LOW | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); | |
} | |
/** | |
* @brief Set the IDLE state of an output channel | |
* @note This function is significant only for the timer instances | |
* supporting the break feature. Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) | |
* can be used to check whether or not a timer instance provides | |
* a break input. | |
* @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n | |
* CR2 OIS2N LL_TIM_OC_SetIdleState\n | |
* CR2 OIS2 LL_TIM_OC_SetIdleState\n | |
* CR2 OIS2N LL_TIM_OC_SetIdleState\n | |
* CR2 OIS3 LL_TIM_OC_SetIdleState\n | |
* CR2 OIS3N LL_TIM_OC_SetIdleState\n | |
* CR2 OIS4 LL_TIM_OC_SetIdleState\n | |
* CR2 OIS5 LL_TIM_OC_SetIdleState\n | |
* CR2 OIS6 LL_TIM_OC_SetIdleState | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @param IdleState This parameter can be one of the following values: | |
* @arg @ref LL_TIM_OCIDLESTATE_LOW | |
* @arg @ref LL_TIM_OCIDLESTATE_HIGH | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); | |
} | |
/** | |
* @brief Get the IDLE state of an output channel | |
* @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n | |
* CR2 OIS2N LL_TIM_OC_GetIdleState\n | |
* CR2 OIS2 LL_TIM_OC_GetIdleState\n | |
* CR2 OIS2N LL_TIM_OC_GetIdleState\n | |
* CR2 OIS3 LL_TIM_OC_GetIdleState\n | |
* CR2 OIS3N LL_TIM_OC_GetIdleState\n | |
* CR2 OIS4 LL_TIM_OC_GetIdleState\n | |
* CR2 OIS5 LL_TIM_OC_GetIdleState\n | |
* CR2 OIS6 LL_TIM_OC_GetIdleState | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH1N | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH2N | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH3N | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_OCIDLESTATE_LOW | |
* @arg @ref LL_TIM_OCIDLESTATE_HIGH | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); | |
} | |
/** | |
* @brief Enable fast mode for the output channel. | |
* @note Acts only if the channel is configured in PWM1 or PWM2 mode. | |
* @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n | |
* CCMR1 OC2FE LL_TIM_OC_EnableFast\n | |
* CCMR2 OC3FE LL_TIM_OC_EnableFast\n | |
* CCMR2 OC4FE LL_TIM_OC_EnableFast\n | |
* CCMR3 OC5FE LL_TIM_OC_EnableFast\n | |
* CCMR3 OC6FE LL_TIM_OC_EnableFast | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); | |
} | |
/** | |
* @brief Disable fast mode for the output channel. | |
* @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n | |
* CCMR1 OC2FE LL_TIM_OC_DisableFast\n | |
* CCMR2 OC3FE LL_TIM_OC_DisableFast\n | |
* CCMR2 OC4FE LL_TIM_OC_DisableFast\n | |
* CCMR3 OC5FE LL_TIM_OC_DisableFast\n | |
* CCMR3 OC6FE LL_TIM_OC_DisableFast | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); | |
} | |
/** | |
* @brief Indicates whether fast mode is enabled for the output channel. | |
* @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n | |
* CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n | |
* CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n | |
* CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n | |
* CCMR3 OC5FE LL_TIM_OC_IsEnabledFast\n | |
* CCMR3 OC6FE LL_TIM_OC_IsEnabledFast | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
register uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; | |
return (READ_BIT(*pReg, bitfield) == bitfield); | |
} | |
/** | |
* @brief Enable compare register (TIMx_CCRx) preload for the output channel. | |
* @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n | |
* CCMR1 OC2PE LL_TIM_OC_EnablePreload\n | |
* CCMR2 OC3PE LL_TIM_OC_EnablePreload\n | |
* CCMR2 OC4PE LL_TIM_OC_EnablePreload\n | |
* CCMR3 OC5PE LL_TIM_OC_EnablePreload\n | |
* CCMR3 OC6PE LL_TIM_OC_EnablePreload | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); | |
} | |
/** | |
* @brief Disable compare register (TIMx_CCRx) preload for the output channel. | |
* @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n | |
* CCMR1 OC2PE LL_TIM_OC_DisablePreload\n | |
* CCMR2 OC3PE LL_TIM_OC_DisablePreload\n | |
* CCMR2 OC4PE LL_TIM_OC_DisablePreload\n | |
* CCMR3 OC5PE LL_TIM_OC_DisablePreload\n | |
* CCMR3 OC6PE LL_TIM_OC_DisablePreload | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); | |
} | |
/** | |
* @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. | |
* @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n | |
* CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n | |
* CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n | |
* CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n | |
* CCMR3 OC5PE LL_TIM_OC_IsEnabledPreload\n | |
* CCMR3 OC6PE LL_TIM_OC_IsEnabledPreload | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
register uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; | |
return (READ_BIT(*pReg, bitfield) == bitfield); | |
} | |
/** | |
* @brief Enable clearing the output channel on an external event. | |
* @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. | |
* @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether | |
* or not a timer instance can clear the OCxREF signal on an external event. | |
* @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n | |
* CCMR1 OC2CE LL_TIM_OC_EnableClear\n | |
* CCMR2 OC3CE LL_TIM_OC_EnableClear\n | |
* CCMR2 OC4CE LL_TIM_OC_EnableClear\n | |
* CCMR3 OC5CE LL_TIM_OC_EnableClear\n | |
* CCMR3 OC6CE LL_TIM_OC_EnableClear | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); | |
} | |
/** | |
* @brief Disable clearing the output channel on an external event. | |
* @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether | |
* or not a timer instance can clear the OCxREF signal on an external event. | |
* @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n | |
* CCMR1 OC2CE LL_TIM_OC_DisableClear\n | |
* CCMR2 OC3CE LL_TIM_OC_DisableClear\n | |
* CCMR2 OC4CE LL_TIM_OC_DisableClear\n | |
* CCMR3 OC5CE LL_TIM_OC_DisableClear\n | |
* CCMR3 OC6CE LL_TIM_OC_DisableClear | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); | |
} | |
/** | |
* @brief Indicates clearing the output channel on an external event is enabled for the output channel. | |
* @note This function enables clearing the output channel on an external event. | |
* @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. | |
* @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether | |
* or not a timer instance can clear the OCxREF signal on an external event. | |
* @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n | |
* CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n | |
* CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n | |
* CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n | |
* CCMR3 OC5CE LL_TIM_OC_IsEnabledClear\n | |
* CCMR3 OC6CE LL_TIM_OC_IsEnabledClear | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @arg @ref LL_TIM_CHANNEL_CH5 | |
* @arg @ref LL_TIM_CHANNEL_CH6 | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
register uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; | |
return (READ_BIT(*pReg, bitfield) == bitfield); | |
} | |
/** | |
* @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge if the Ocx and OCxN signals). | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* dead-time insertion feature is supported by a timer instance. | |
* @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter | |
* @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime | |
* @param TIMx Timer instance | |
* @param DeadTime between Min_Data=0 and Max_Data=255 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) | |
{ | |
MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); | |
} | |
/** | |
* @brief Set compare value for output channel 1 (TIMx_CCR1). | |
* @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 1 is supported by a timer instance. | |
* @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 | |
* @param TIMx Timer instance | |
* @param CompareValue between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) | |
{ | |
WRITE_REG(TIMx->CCR1, CompareValue); | |
} | |
/** | |
* @brief Set compare value for output channel 2 (TIMx_CCR2). | |
* @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 2 is supported by a timer instance. | |
* @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 | |
* @param TIMx Timer instance | |
* @param CompareValue between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) | |
{ | |
WRITE_REG(TIMx->CCR2, CompareValue); | |
} | |
/** | |
* @brief Set compare value for output channel 3 (TIMx_CCR3). | |
* @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not | |
* output channel is supported by a timer instance. | |
* @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 | |
* @param TIMx Timer instance | |
* @param CompareValue between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) | |
{ | |
WRITE_REG(TIMx->CCR3, CompareValue); | |
} | |
/** | |
* @brief Set compare value for output channel 4 (TIMx_CCR4). | |
* @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 4 is supported by a timer instance. | |
* @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 | |
* @param TIMx Timer instance | |
* @param CompareValue between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) | |
{ | |
WRITE_REG(TIMx->CCR4, CompareValue); | |
} | |
/** | |
* @brief Set compare value for output channel 5 (TIMx_CCR5). | |
* @note Macro @ref IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 5 is supported by a timer instance. | |
* @rmtoll CCR5 CCR5 LL_TIM_OC_SetCompareCH5 | |
* @param TIMx Timer instance | |
* @param CompareValue between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetCompareCH5(TIM_TypeDef *TIMx, uint32_t CompareValue) | |
{ | |
WRITE_REG(TIMx->CCR5, CompareValue); | |
} | |
/** | |
* @brief Set compare value for output channel 6 (TIMx_CCR6). | |
* @note Macro @ref IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 6 is supported by a timer instance. | |
* @rmtoll CCR6 CCR6 LL_TIM_OC_SetCompareCH6 | |
* @param TIMx Timer instance | |
* @param CompareValue between Min_Data=0 and Max_Data=65535 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_OC_SetCompareCH6(TIM_TypeDef *TIMx, uint32_t CompareValue) | |
{ | |
WRITE_REG(TIMx->CCR6, CompareValue); | |
} | |
/** | |
* @brief Get compare value (TIMx_CCR1) set for output channel 1. | |
* @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 1 is supported by a timer instance. | |
* @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 | |
* @param TIMx Timer instance | |
* @retval CompareValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR1)); | |
} | |
/** | |
* @brief Get compare value (TIMx_CCR2) set for output channel 2. | |
* @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 2 is supported by a timer instance. | |
* @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 | |
* @param TIMx Timer instance | |
* @retval CompareValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR2)); | |
} | |
/** | |
* @brief Get compare value (TIMx_CCR3) set for output channel 3. | |
* @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 3 is supported by a timer instance. | |
* @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 | |
* @param TIMx Timer instance | |
* @retval CompareValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR3)); | |
} | |
/** | |
* @brief Get compare value (TIMx_CCR4) set for output channel 4. | |
* @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 4 is supported by a timer instance. | |
* @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 | |
* @param TIMx Timer instance | |
* @retval CompareValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR4)); | |
} | |
/** | |
* @brief Get compare value (TIMx_CCR5) set for output channel 5. | |
* @note Macro @ref IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 5 is supported by a timer instance. | |
* @rmtoll CCR5 CCR5 LL_TIM_OC_GetCompareCH5 | |
* @param TIMx Timer instance | |
* @retval CompareValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH5(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR5)); | |
} | |
/** | |
* @brief Get compare value (TIMx_CCR6) set for output channel 6. | |
* @note Macro @ref IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not | |
* output channel 6 is supported by a timer instance. | |
* @rmtoll CCR6 CCR6 LL_TIM_OC_GetCompareCH6 | |
* @param TIMx Timer instance | |
* @retval CompareValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH6(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR6)); | |
} | |
/** | |
* @brief Select on which reference signal the OC5REF is combined to. | |
* @note Macro @ref IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports the combined 3-phase PWM mode. | |
* @rmtoll CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels\n | |
* CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels\n | |
* CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels | |
* @param TIMx Timer instance | |
* @param GroupCH5 This parameter can be one of the following values: | |
* @arg @ref LL_TIM_GROUPCH5_NONE | |
* @arg @ref LL_TIM_GROUPCH5_OC1REFC | |
* @arg @ref LL_TIM_GROUPCH5_OC2REFC | |
* @arg @ref LL_TIM_GROUPCH5_OC3REFC | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetCH5CombinedChannels(TIM_TypeDef *TIMx, uint32_t GroupCH5) | |
{ | |
MODIFY_REG(TIMx->CCR5, TIM_CCR5_CCR5, GroupCH5); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration | |
* @{ | |
*/ | |
/** | |
* @brief Configure input channel. | |
* @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n | |
* CCMR1 IC1PSC LL_TIM_IC_Config\n | |
* CCMR1 IC1F LL_TIM_IC_Config\n | |
* CCMR1 CC2S LL_TIM_IC_Config\n | |
* CCMR1 IC2PSC LL_TIM_IC_Config\n | |
* CCMR1 IC2F LL_TIM_IC_Config\n | |
* CCMR2 CC3S LL_TIM_IC_Config\n | |
* CCMR2 IC3PSC LL_TIM_IC_Config\n | |
* CCMR2 IC3F LL_TIM_IC_Config\n | |
* CCMR2 CC4S LL_TIM_IC_Config\n | |
* CCMR2 IC4PSC LL_TIM_IC_Config\n | |
* CCMR2 IC4F LL_TIM_IC_Config\n | |
* CCER CC1P LL_TIM_IC_Config\n | |
* CCER CC1NP LL_TIM_IC_Config\n | |
* CCER CC2P LL_TIM_IC_Config\n | |
* CCER CC2NP LL_TIM_IC_Config\n | |
* CCER CC3P LL_TIM_IC_Config\n | |
* CCER CC3NP LL_TIM_IC_Config\n | |
* CCER CC4P LL_TIM_IC_Config\n | |
* CCER CC4NP LL_TIM_IC_Config | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @param Configuration This parameter must be a combination of all the following values: | |
* @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC | |
* @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 | |
* @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), | |
((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]); | |
MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), | |
(Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); | |
} | |
/** | |
* @brief Set the active input. | |
* @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n | |
* CCMR1 CC2S LL_TIM_IC_SetActiveInput\n | |
* CCMR2 CC3S LL_TIM_IC_SetActiveInput\n | |
* CCMR2 CC4S LL_TIM_IC_SetActiveInput | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @param ICActiveInput This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI | |
* @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI | |
* @arg @ref LL_TIM_ACTIVEINPUT_TRC | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); | |
} | |
/** | |
* @brief Get the current active input. | |
* @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n | |
* CCMR1 CC2S LL_TIM_IC_GetActiveInput\n | |
* CCMR2 CC3S LL_TIM_IC_GetActiveInput\n | |
* CCMR2 CC4S LL_TIM_IC_GetActiveInput | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI | |
* @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI | |
* @arg @ref LL_TIM_ACTIVEINPUT_TRC | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); | |
} | |
/** | |
* @brief Set the prescaler of input channel. | |
* @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n | |
* CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n | |
* CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n | |
* CCMR2 IC4PSC LL_TIM_IC_SetPrescaler | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @param ICPrescaler This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ICPSC_DIV1 | |
* @arg @ref LL_TIM_ICPSC_DIV2 | |
* @arg @ref LL_TIM_ICPSC_DIV4 | |
* @arg @ref LL_TIM_ICPSC_DIV8 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); | |
} | |
/** | |
* @brief Get the current prescaler value acting on an input channel. | |
* @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n | |
* CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n | |
* CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n | |
* CCMR2 IC4PSC LL_TIM_IC_GetPrescaler | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_ICPSC_DIV1 | |
* @arg @ref LL_TIM_ICPSC_DIV2 | |
* @arg @ref LL_TIM_ICPSC_DIV4 | |
* @arg @ref LL_TIM_ICPSC_DIV8 | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); | |
} | |
/** | |
* @brief Set the input filter duration. | |
* @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n | |
* CCMR1 IC2F LL_TIM_IC_SetFilter\n | |
* CCMR2 IC3F LL_TIM_IC_SetFilter\n | |
* CCMR2 IC4F LL_TIM_IC_SetFilter | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @param ICFilter This parameter can be one of the following values: | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); | |
} | |
/** | |
* @brief Get the input filter duration. | |
* @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n | |
* CCMR1 IC2F LL_TIM_IC_GetFilter\n | |
* CCMR2 IC3F LL_TIM_IC_GetFilter\n | |
* CCMR2 IC4F LL_TIM_IC_GetFilter | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 | |
* @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); | |
return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); | |
} | |
/** | |
* @brief Set the input channel polarity. | |
* @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n | |
* CCER CC1NP LL_TIM_IC_SetPolarity\n | |
* CCER CC2P LL_TIM_IC_SetPolarity\n | |
* CCER CC2NP LL_TIM_IC_SetPolarity\n | |
* CCER CC3P LL_TIM_IC_SetPolarity\n | |
* CCER CC3NP LL_TIM_IC_SetPolarity\n | |
* CCER CC4P LL_TIM_IC_SetPolarity\n | |
* CCER CC4NP LL_TIM_IC_SetPolarity | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @param ICPolarity This parameter can be one of the following values: | |
* @arg @ref LL_TIM_IC_POLARITY_RISING | |
* @arg @ref LL_TIM_IC_POLARITY_FALLING | |
* @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), | |
ICPolarity << SHIFT_TAB_CCxP[iChannel]); | |
} | |
/** | |
* @brief Get the current input channel polarity. | |
* @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n | |
* CCER CC1NP LL_TIM_IC_GetPolarity\n | |
* CCER CC2P LL_TIM_IC_GetPolarity\n | |
* CCER CC2NP LL_TIM_IC_GetPolarity\n | |
* CCER CC3P LL_TIM_IC_GetPolarity\n | |
* CCER CC3NP LL_TIM_IC_GetPolarity\n | |
* CCER CC4P LL_TIM_IC_GetPolarity\n | |
* CCER CC4NP LL_TIM_IC_GetPolarity | |
* @param TIMx Timer instance | |
* @param Channel This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CHANNEL_CH1 | |
* @arg @ref LL_TIM_CHANNEL_CH2 | |
* @arg @ref LL_TIM_CHANNEL_CH3 | |
* @arg @ref LL_TIM_CHANNEL_CH4 | |
* @retval Returned value can be one of the following values: | |
* @arg @ref LL_TIM_IC_POLARITY_RISING | |
* @arg @ref LL_TIM_IC_POLARITY_FALLING | |
* @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) | |
{ | |
register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); | |
return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> | |
SHIFT_TAB_CCxP[iChannel]); | |
} | |
/** | |
* @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). | |
* @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides an XOR input. | |
* @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->CR2, TIM_CR2_TI1S); | |
} | |
/** | |
* @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. | |
* @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides an XOR input. | |
* @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); | |
} | |
/** | |
* @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. | |
* @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides an XOR input. | |
* @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)); | |
} | |
/** | |
* @brief Get captured value for input channel 1. | |
* @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not | |
* input channel 1 is supported by a timer instance. | |
* @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 | |
* @param TIMx Timer instance | |
* @retval CapturedValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR1)); | |
} | |
/** | |
* @brief Get captured value for input channel 2. | |
* @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not | |
* input channel 2 is supported by a timer instance. | |
* @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 | |
* @param TIMx Timer instance | |
* @retval CapturedValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR2)); | |
} | |
/** | |
* @brief Get captured value for input channel 3. | |
* @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not | |
* input channel 3 is supported by a timer instance. | |
* @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 | |
* @param TIMx Timer instance | |
* @retval CapturedValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR3)); | |
} | |
/** | |
* @brief Get captured value for input channel 4. | |
* @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. | |
* @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports a 32 bits counter. | |
* @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not | |
* input channel 4 is supported by a timer instance. | |
* @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 | |
* @param TIMx Timer instance | |
* @retval CapturedValue (between Min_Data=0 and Max_Data=65535) | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) | |
{ | |
return (uint32_t)(READ_REG(TIMx->CCR4)); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection | |
* @{ | |
*/ | |
/** | |
* @brief Enable external clock mode 2. | |
* @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. | |
* @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports external clock mode2. | |
* @rmtoll SMCR ECE LL_TIM_EnableExternalClock | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); | |
} | |
/** | |
* @brief Disable external clock mode 2. | |
* @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports external clock mode2. | |
* @rmtoll SMCR ECE LL_TIM_DisableExternalClock | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); | |
} | |
/** | |
* @brief Indicate whether external clock mode 2 is enabled. | |
* @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports external clock mode2. | |
* @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)); | |
} | |
/** | |
* @brief Set the clock source of the counter clock. | |
* @note when selected clock source is external clock mode 1, the timer input | |
* the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() | |
* function. This timer input must be configured by calling | |
* the @ref LL_TIM_IC_Config() function. | |
* @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports external clock mode1. | |
* @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports external clock mode2. | |
* @rmtoll SMCR SMS LL_TIM_SetClockSource\n | |
* SMCR ECE LL_TIM_SetClockSource | |
* @param TIMx Timer instance | |
* @param ClockSource This parameter can be one of the following values: | |
* @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL | |
* @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 | |
* @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) | |
{ | |
MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); | |
} | |
/** | |
* @brief Set the encoder interface mode. | |
* @note Macro @ref IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance supports the encoder mode. | |
* @rmtoll SMCR SMS LL_TIM_SetEncoderMode | |
* @param TIMx Timer instance | |
* @param EncoderMode This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ENCODERMODE_X2_TI1 | |
* @arg @ref LL_TIM_ENCODERMODE_X2_TI2 | |
* @arg @ref LL_TIM_ENCODERMODE_X4_TI12 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) | |
{ | |
MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration | |
* @{ | |
*/ | |
/** | |
* @brief Set the trigger output (TRGO) used for timer synchronization . | |
* @note Macro @ref IS_TIM_MASTER_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance can operate as a master timer. | |
* @rmtoll CR2 MMS LL_TIM_SetTriggerOutput | |
* @param TIMx Timer instance | |
* @param TimerSynchronization This parameter can be one of the following values: | |
* @arg @ref LL_TIM_TRGO_RESET | |
* @arg @ref LL_TIM_TRGO_ENABLE | |
* @arg @ref LL_TIM_TRGO_UPDATE | |
* @arg @ref LL_TIM_TRGO_CC1IF | |
* @arg @ref LL_TIM_TRGO_OC1REF | |
* @arg @ref LL_TIM_TRGO_OC2REF | |
* @arg @ref LL_TIM_TRGO_OC3REF | |
* @arg @ref LL_TIM_TRGO_OC4REF | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) | |
{ | |
MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); | |
} | |
/** | |
* @brief Set the trigger output 2 (TRGO2) used for ADC synchronization . | |
* @note Macro @ref IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check | |
* whether or not a timer instance can be used for ADC synchronization. | |
* @rmtoll CR2 MMS2 LL_TIM_SetTriggerOutput2 | |
* @param TIMx Timer Instance | |
* @param ADCSynchronization This parameter can be one of the following values: | |
* @arg @ref LL_TIM_TRGO2_RESET | |
* @arg @ref LL_TIM_TRGO2_ENABLE | |
* @arg @ref LL_TIM_TRGO2_UPDATE | |
* @arg @ref LL_TIM_TRGO2_CC1F | |
* @arg @ref LL_TIM_TRGO2_OC1 | |
* @arg @ref LL_TIM_TRGO2_OC2 | |
* @arg @ref LL_TIM_TRGO2_OC3 | |
* @arg @ref LL_TIM_TRGO2_OC4 | |
* @arg @ref LL_TIM_TRGO2_OC5 | |
* @arg @ref LL_TIM_TRGO2_OC6 | |
* @arg @ref LL_TIM_TRGO2_OC4_RISINGFALLING | |
* @arg @ref LL_TIM_TRGO2_OC6_RISINGFALLING | |
* @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_RISING | |
* @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_FALLING | |
* @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_RISING | |
* @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_FALLING | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetTriggerOutput2(TIM_TypeDef *TIMx, uint32_t ADCSynchronization) | |
{ | |
MODIFY_REG(TIMx->CR2, TIM_CR2_MMS2, ADCSynchronization); | |
} | |
/** | |
* @brief Set the synchronization mode of a slave timer. | |
* @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance can operate as a slave timer. | |
* @rmtoll SMCR SMS LL_TIM_SetSlaveMode | |
* @param TIMx Timer instance | |
* @param SlaveMode This parameter can be one of the following values: | |
* @arg @ref LL_TIM_SLAVEMODE_DISABLED | |
* @arg @ref LL_TIM_SLAVEMODE_RESET | |
* @arg @ref LL_TIM_SLAVEMODE_GATED | |
* @arg @ref LL_TIM_SLAVEMODE_TRIGGER | |
* @arg @ref LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) | |
{ | |
MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); | |
} | |
/** | |
* @brief Set the selects the trigger input to be used to synchronize the counter. | |
* @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance can operate as a slave timer. | |
* @rmtoll SMCR TS LL_TIM_SetTriggerInput | |
* @param TIMx Timer instance | |
* @param TriggerInput This parameter can be one of the following values: | |
* @arg @ref LL_TIM_TS_ITR0 | |
* @arg @ref LL_TIM_TS_ITR1 | |
* @arg @ref LL_TIM_TS_ITR2 | |
* @arg @ref LL_TIM_TS_ITR3 | |
* @arg @ref LL_TIM_TS_TI1F_ED | |
* @arg @ref LL_TIM_TS_TI1FP1 | |
* @arg @ref LL_TIM_TS_TI2FP2 | |
* @arg @ref LL_TIM_TS_ETRF | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) | |
{ | |
MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); | |
} | |
/** | |
* @brief Enable the Master/Slave mode. | |
* @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance can operate as a slave timer. | |
* @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); | |
} | |
/** | |
* @brief Disable the Master/Slave mode. | |
* @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance can operate as a slave timer. | |
* @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); | |
} | |
/** | |
* @brief Indicates whether the Master/Slave mode is enabled. | |
* @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance can operate as a slave timer. | |
* @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)); | |
} | |
/** | |
* @brief Configure the external trigger (ETR) input. | |
* @note Macro @ref IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides an external trigger input. | |
* @rmtoll SMCR ETP LL_TIM_ConfigETR\n | |
* SMCR ETPS LL_TIM_ConfigETR\n | |
* SMCR ETF LL_TIM_ConfigETR | |
* @param TIMx Timer instance | |
* @param ETRPolarity This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED | |
* @arg @ref LL_TIM_ETR_POLARITY_INVERTED | |
* @param ETRPrescaler This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ETR_PRESCALER_DIV1 | |
* @arg @ref LL_TIM_ETR_PRESCALER_DIV2 | |
* @arg @ref LL_TIM_ETR_PRESCALER_DIV4 | |
* @arg @ref LL_TIM_ETR_PRESCALER_DIV8 | |
* @param ETRFilter This parameter can be one of the following values: | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV1 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 | |
* @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, | |
uint32_t ETRFilter) | |
{ | |
MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Break_Function Break function configuration | |
* @{ | |
*/ | |
/** | |
* @brief Enable the break function. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR BKE LL_TIM_EnableBRK | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); | |
} | |
/** | |
* @brief Disable the break function. | |
* @rmtoll BDTR BKE LL_TIM_DisableBRK | |
* @param TIMx Timer instance | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); | |
} | |
/** | |
* @brief Configure the break input. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR BKP LL_TIM_ConfigBRK\n | |
* BDTR BKF LL_TIM_ConfigBRK | |
* @param TIMx Timer instance | |
* @param BreakPolarity This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK_POLARITY_LOW | |
* @arg @ref LL_TIM_BREAK_POLARITY_HIGH | |
* @param BreakFilter This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV1 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N2 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N4 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N8 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N6 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N8 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N6 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N8 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N6 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N8 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N5 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N6 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N8 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N5 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N6 | |
* @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N8 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity, uint32_t BreakFilter) | |
{ | |
MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP | TIM_BDTR_BKF, BreakPolarity | BreakFilter); | |
} | |
/** | |
* @brief Enable the break 2 function. | |
* @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a second break input. | |
* @rmtoll BDTR BK2E LL_TIM_EnableBRK2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableBRK2(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->BDTR, TIM_BDTR_BK2E); | |
} | |
/** | |
* @brief Disable the break 2 function. | |
* @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a second break input. | |
* @rmtoll BDTR BK2E LL_TIM_DisableBRK2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableBRK2(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2E); | |
} | |
/** | |
* @brief Configure the break 2 input. | |
* @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a second break input. | |
* @rmtoll BDTR BK2P LL_TIM_ConfigBRK2\n | |
* BDTR BK2F LL_TIM_ConfigBRK2 | |
* @param TIMx Timer instance | |
* @param Break2Polarity This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK2_POLARITY_LOW | |
* @arg @ref LL_TIM_BREAK2_POLARITY_HIGH | |
* @param Break2Filter This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV1 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N2 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N4 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N8 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N6 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N8 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N6 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N8 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N6 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N8 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N5 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N6 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N8 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N5 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N6 | |
* @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N8 | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ConfigBRK2(TIM_TypeDef *TIMx, uint32_t Break2Polarity, uint32_t Break2Filter) | |
{ | |
MODIFY_REG(TIMx->BDTR, TIM_BDTR_BK2P | TIM_BDTR_BK2F, Break2Polarity | Break2Filter); | |
} | |
/** | |
* @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR OSSI LL_TIM_SetOffStates\n | |
* BDTR OSSR LL_TIM_SetOffStates | |
* @param TIMx Timer instance | |
* @param OffStateIdle This parameter can be one of the following values: | |
* @arg @ref LL_TIM_OSSI_DISABLE | |
* @arg @ref LL_TIM_OSSI_ENABLE | |
* @param OffStateRun This parameter can be one of the following values: | |
* @arg @ref LL_TIM_OSSR_DISABLE | |
* @arg @ref LL_TIM_OSSR_ENABLE | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) | |
{ | |
MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); | |
} | |
/** | |
* @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); | |
} | |
/** | |
* @brief Disable automatic output (MOE can be set only by software). | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); | |
} | |
/** | |
* @brief Indicate whether automatic output is enabled. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)); | |
} | |
/** | |
* @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). | |
* @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by | |
* software and is reset in case of break or break2 event | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR MOE LL_TIM_EnableAllOutputs | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); | |
} | |
/** | |
* @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). | |
* @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by | |
* software and is reset in case of break or break2 event. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR MOE LL_TIM_DisableAllOutputs | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); | |
} | |
/** | |
* @brief Indicates whether outputs are enabled. | |
* @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not | |
* a timer instance provides a break input. | |
* @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)); | |
} | |
#if defined(TIM_BREAK_INPUT_SUPPORT) | |
/** | |
* @brief Enable the signals connected to the designated timer break input. | |
* @note Macro @ref IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether | |
* or not a timer instance allows for break input selection. | |
* @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n | |
* AF1 BKDFBKE LL_TIM_EnableBreakInputSource\n | |
* AF2 BK2INE LL_TIM_EnableBreakInputSource\n | |
* AF2 BK2DFBKE LL_TIM_EnableBreakInputSource | |
* @param TIMx Timer instance | |
* @param BreakInput This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK_INPUT_BKIN | |
* @arg @ref LL_TIM_BREAK_INPUT_BKIN2 | |
* @param Source This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BKIN_SOURCE_BKIN | |
* @arg @ref LL_TIM_BKIN_SOURCE_DF1BK | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) | |
{ | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); | |
SET_BIT(*pReg , Source); | |
} | |
/** | |
* @brief Disable the signals connected to the designated timer break input. | |
* @note Macro @ref IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether | |
* or not a timer instance allows for break input selection. | |
* @rmtoll AF1 BKINE LL_TIM_DisableBreakInputSource\n | |
* AF1 BKDFBKE LL_TIM_DisableBreakInputSource\n | |
* AF2 BK2INE LL_TIM_DisableBreakInputSource\n | |
* AF2 BK2DFBKE LL_TIM_DisableBreakInputSource | |
* @param TIMx Timer instance | |
* @param BreakInput This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK_INPUT_BKIN | |
* @arg @ref LL_TIM_BREAK_INPUT_BKIN2 | |
* @param Source This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BKIN_SOURCE_BKIN | |
* @arg @ref LL_TIM_BKIN_SOURCE_DF1BK | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) | |
{ | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); | |
CLEAR_BIT(*pReg, Source); | |
} | |
/** | |
* @brief Set the polarity of the break signal for the timer break input. | |
* @note Macro @ref IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether | |
* or not a timer instance allows for break input selection. | |
* @rmtoll AF1 BKINE LL_TIM_SetBreakInputSourcePolarity\n | |
* AF1 BKDFBKE LL_TIM_SetBreakInputSourcePolarity\n | |
* AF2 BK2INE LL_TIM_SetBreakInputSourcePolarity\n | |
* AF2 BK2DFBKE LL_TIM_SetBreakInputSourcePolarity | |
* @param TIMx Timer instance | |
* @param BreakInput This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BREAK_INPUT_BKIN | |
* @arg @ref LL_TIM_BREAK_INPUT_BKIN2 | |
* @param Source This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BKIN_SOURCE_BKIN | |
* @arg @ref LL_TIM_BKIN_SOURCE_DF1BK | |
* @param Polarity This parameter can be one of the following values: | |
* @arg @ref LL_TIM_BKIN_POLARITY_LOW | |
* @arg @ref LL_TIM_BKIN_POLARITY_HIGH | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, | |
uint32_t Polarity) | |
{ | |
register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); | |
MODIFY_REG(*pReg, (TIMx_AF1_BKINP << (TIM_POSITION_BRK_SOURCE)) , (Polarity << (TIM_POSITION_BRK_SOURCE))); | |
} | |
#endif /* TIM_BREAK_INPUT_SUPPORT */ | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration | |
* @{ | |
*/ | |
/** | |
* @brief Configures the timer DMA burst feature. | |
* @note Macro @ref IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or | |
* not a timer instance supports the DMA burst mode. | |
* @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n | |
* DCR DBA LL_TIM_ConfigDMABurst | |
* @param TIMx Timer instance | |
* @param DMABurstBaseAddress This parameter can be one of the following values: | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_DIER | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_SR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_EGR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCER | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CNT | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_PSC | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_ARR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_RCR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR3 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCR5 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_CCR6 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_OR | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_AF1 | |
* @arg @ref LL_TIM_DMABURST_BASEADDR_AF2 | |
* @param DMABurstLength This parameter can be one of the following values: | |
* @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER | |
* @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS | |
* @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) | |
{ | |
MODIFY_REG(TIMx->DCR, TIM_DCR_DBL | TIM_DCR_DBA, DMABurstBaseAddress | DMABurstLength); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping | |
* @{ | |
*/ | |
/** | |
* @brief Remap TIM inputs (input channel, internal/external triggers). | |
* @note Macro @ref IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not | |
* a some timer inputs can be remapped. | |
* @rmtoll TIM2_OR ITR1_RMP LL_TIM_SetRemap\n | |
* TIM5_OR TI4_RMP LL_TIM_SetRemap\n | |
* TIM11_OR TI1_RMP LL_TIM_SetRemap | |
* @param TIMx Timer instance | |
* @param Remap Remap param depends on the TIMx. Description available only | |
* in CHM version of the User Manual (not in .pdf). | |
* Otherwise see Reference Manual description of OR registers. | |
* | |
* Below description summarizes "Timer Instance" and "Remap" param combinations: | |
* | |
* TIM2: one of the following values | |
* | |
* ITR1_RMP can be one of the following values | |
* @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO | |
* @arg @ref LL_TIM_TIM2_ITR1_RMP_ETH_PTP | |
* @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF | |
* @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF | |
* | |
* TIM5: one of the following values | |
* | |
* @arg @ref LL_TIM_TIM5_TI4_RMP_GPIO | |
* @arg @ref LL_TIM_TIM5_TI4_RMP_LSI | |
* @arg @ref LL_TIM_TIM5_TI4_RMP_LSE | |
* @arg @ref LL_TIM_TIM5_TI4_RMP_RTC | |
* | |
* TIM11: one of the following values | |
* | |
* @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO | |
* @arg @ref LL_TIM_TIM11_TI1_RMP_SPDIFRX | |
* @arg @ref LL_TIM_TIM11_TI1_RMP_HSE | |
* @arg @ref LL_TIM_TIM11_TI1_RMP_MCO1 | |
* | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) | |
{ | |
MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management | |
* @{ | |
*/ | |
/** | |
* @brief Clear the update interrupt flag (UIF). | |
* @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); | |
} | |
/** | |
* @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). | |
* @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 1 interrupt flag (CC1F). | |
* @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). | |
* @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 2 interrupt flag (CC2F). | |
* @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). | |
* @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 3 interrupt flag (CC3F). | |
* @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). | |
* @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 4 interrupt flag (CC4F). | |
* @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). | |
* @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 5 interrupt flag (CC5F). | |
* @rmtoll SR CC5IF LL_TIM_ClearFlag_CC5 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC5(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC5IF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 5 interrupt flag (CC5F) is set (Capture/Compare 5 interrupt is pending). | |
* @rmtoll SR CC5IF LL_TIM_IsActiveFlag_CC5 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC5(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC5IF) == (TIM_SR_CC5IF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 6 interrupt flag (CC6F). | |
* @rmtoll SR CC6IF LL_TIM_ClearFlag_CC6 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC6(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC6IF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 6 interrupt flag (CC6F) is set (Capture/Compare 6 interrupt is pending). | |
* @rmtoll SR CC6IF LL_TIM_IsActiveFlag_CC6 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC6(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC6IF) == (TIM_SR_CC6IF)); | |
} | |
/** | |
* @brief Clear the commutation interrupt flag (COMIF). | |
* @rmtoll SR COMIF LL_TIM_ClearFlag_COM | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); | |
} | |
/** | |
* @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). | |
* @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)); | |
} | |
/** | |
* @brief Clear the trigger interrupt flag (TIF). | |
* @rmtoll SR TIF LL_TIM_ClearFlag_TRIG | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); | |
} | |
/** | |
* @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). | |
* @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)); | |
} | |
/** | |
* @brief Clear the break interrupt flag (BIF). | |
* @rmtoll SR BIF LL_TIM_ClearFlag_BRK | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); | |
} | |
/** | |
* @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). | |
* @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)); | |
} | |
/** | |
* @brief Clear the break 2 interrupt flag (B2IF). | |
* @rmtoll SR B2IF LL_TIM_ClearFlag_BRK2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_BRK2(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_B2IF)); | |
} | |
/** | |
* @brief Indicate whether break 2 interrupt flag (B2IF) is set (break 2 interrupt is pending). | |
* @rmtoll SR B2IF LL_TIM_IsActiveFlag_BRK2 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK2(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_B2IF) == (TIM_SR_B2IF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). | |
* @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending). | |
* @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). | |
* @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending). | |
* @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). | |
* @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending). | |
* @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)); | |
} | |
/** | |
* @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). | |
* @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); | |
} | |
/** | |
* @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending). | |
* @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)); | |
} | |
/** | |
* @brief Clear the system break interrupt flag (SBIF). | |
* @rmtoll SR SBIF LL_TIM_ClearFlag_SYSBRK | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_ClearFlag_SYSBRK(TIM_TypeDef *TIMx) | |
{ | |
WRITE_REG(TIMx->SR, ~(TIM_SR_SBIF)); | |
} | |
/** | |
* @brief Indicate whether system break interrupt flag (SBIF) is set (system break interrupt is pending). | |
* @rmtoll SR SBIF LL_TIM_IsActiveFlag_SYSBRK | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_SYSBRK(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->SR, TIM_SR_SBIF) == (TIM_SR_SBIF)); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_IT_Management IT-Management | |
* @{ | |
*/ | |
/** | |
* @brief Enable update interrupt (UIE). | |
* @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_UIE); | |
} | |
/** | |
* @brief Disable update interrupt (UIE). | |
* @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); | |
} | |
/** | |
* @brief Indicates whether the update interrupt (UIE) is enabled. | |
* @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)); | |
} | |
/** | |
* @brief Enable capture/compare 1 interrupt (CC1IE). | |
* @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); | |
} | |
/** | |
* @brief Disable capture/compare 1 interrupt (CC1IE). | |
* @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. | |
* @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)); | |
} | |
/** | |
* @brief Enable capture/compare 2 interrupt (CC2IE). | |
* @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); | |
} | |
/** | |
* @brief Disable capture/compare 2 interrupt (CC2IE). | |
* @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. | |
* @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)); | |
} | |
/** | |
* @brief Enable capture/compare 3 interrupt (CC3IE). | |
* @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); | |
} | |
/** | |
* @brief Disable capture/compare 3 interrupt (CC3IE). | |
* @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. | |
* @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)); | |
} | |
/** | |
* @brief Enable capture/compare 4 interrupt (CC4IE). | |
* @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); | |
} | |
/** | |
* @brief Disable capture/compare 4 interrupt (CC4IE). | |
* @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. | |
* @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)); | |
} | |
/** | |
* @brief Enable commutation interrupt (COMIE). | |
* @rmtoll DIER COMIE LL_TIM_EnableIT_COM | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_COMIE); | |
} | |
/** | |
* @brief Disable commutation interrupt (COMIE). | |
* @rmtoll DIER COMIE LL_TIM_DisableIT_COM | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); | |
} | |
/** | |
* @brief Indicates whether the commutation interrupt (COMIE) is enabled. | |
* @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)); | |
} | |
/** | |
* @brief Enable trigger interrupt (TIE). | |
* @rmtoll DIER TIE LL_TIM_EnableIT_TRIG | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_TIE); | |
} | |
/** | |
* @brief Disable trigger interrupt (TIE). | |
* @rmtoll DIER TIE LL_TIM_DisableIT_TRIG | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); | |
} | |
/** | |
* @brief Indicates whether the trigger interrupt (TIE) is enabled. | |
* @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)); | |
} | |
/** | |
* @brief Enable break interrupt (BIE). | |
* @rmtoll DIER BIE LL_TIM_EnableIT_BRK | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_BIE); | |
} | |
/** | |
* @brief Disable break interrupt (BIE). | |
* @rmtoll DIER BIE LL_TIM_DisableIT_BRK | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); | |
} | |
/** | |
* @brief Indicates whether the break interrupt (BIE) is enabled. | |
* @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_DMA_Management DMA-Management | |
* @{ | |
*/ | |
/** | |
* @brief Enable update DMA request (UDE). | |
* @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_UDE); | |
} | |
/** | |
* @brief Disable update DMA request (UDE). | |
* @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); | |
} | |
/** | |
* @brief Indicates whether the update DMA request (UDE) is enabled. | |
* @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)); | |
} | |
/** | |
* @brief Enable capture/compare 1 DMA request (CC1DE). | |
* @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); | |
} | |
/** | |
* @brief Disable capture/compare 1 DMA request (CC1DE). | |
* @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. | |
* @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)); | |
} | |
/** | |
* @brief Enable capture/compare 2 DMA request (CC2DE). | |
* @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); | |
} | |
/** | |
* @brief Disable capture/compare 2 DMA request (CC2DE). | |
* @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. | |
* @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)); | |
} | |
/** | |
* @brief Enable capture/compare 3 DMA request (CC3DE). | |
* @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); | |
} | |
/** | |
* @brief Disable capture/compare 3 DMA request (CC3DE). | |
* @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. | |
* @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)); | |
} | |
/** | |
* @brief Enable capture/compare 4 DMA request (CC4DE). | |
* @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); | |
} | |
/** | |
* @brief Disable capture/compare 4 DMA request (CC4DE). | |
* @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); | |
} | |
/** | |
* @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. | |
* @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)); | |
} | |
/** | |
* @brief Enable commutation DMA request (COMDE). | |
* @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_COMDE); | |
} | |
/** | |
* @brief Disable commutation DMA request (COMDE). | |
* @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); | |
} | |
/** | |
* @brief Indicates whether the commutation DMA request (COMDE) is enabled. | |
* @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)); | |
} | |
/** | |
* @brief Enable trigger interrupt (TDE). | |
* @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->DIER, TIM_DIER_TDE); | |
} | |
/** | |
* @brief Disable trigger interrupt (TDE). | |
* @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) | |
{ | |
CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); | |
} | |
/** | |
* @brief Indicates whether the trigger interrupt (TDE) is enabled. | |
* @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG | |
* @param TIMx Timer instance | |
* @retval State of bit (1 or 0). | |
*/ | |
__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx) | |
{ | |
return (READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)); | |
} | |
/** | |
* @} | |
*/ | |
/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management | |
* @{ | |
*/ | |
/** | |
* @brief Generate an update event. | |
* @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_UG); | |
} | |
/** | |
* @brief Generate Capture/Compare 1 event. | |
* @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_CC1G); | |
} | |
/** | |
* @brief Generate Capture/Compare 2 event. | |
* @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_CC2G); | |
} | |
/** | |
* @brief Generate Capture/Compare 3 event. | |
* @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_CC3G); | |
} | |
/** | |
* @brief Generate Capture/Compare 4 event. | |
* @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_CC4G); | |
} | |
/** | |
* @brief Generate commutation event. | |
* @rmtoll EGR COMG LL_TIM_GenerateEvent_COM | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_COMG); | |
} | |
/** | |
* @brief Generate trigger event. | |
* @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_TG); | |
} | |
/** | |
* @brief Generate break event. | |
* @rmtoll EGR BG LL_TIM_GenerateEvent_BRK | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_BG); | |
} | |
/** | |
* @brief Generate break 2 event. | |
* @rmtoll EGR B2G LL_TIM_GenerateEvent_BRK2 | |
* @param TIMx Timer instance | |
* @retval None | |
*/ | |
__STATIC_INLINE void LL_TIM_GenerateEvent_BRK2(TIM_TypeDef *TIMx) | |
{ | |
SET_BIT(TIMx->EGR, TIM_EGR_B2G); | |
} | |
/** | |
* @} | |
*/ | |
#if defined(USE_FULL_LL_DRIVER) | |
/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions | |
* @{ | |
*/ | |
ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx); | |
void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); | |
ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct); | |
void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); | |
ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); | |
void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); | |
ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); | |
void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); | |
ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); | |
void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); | |
ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); | |
void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); | |
ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); | |
/** | |
* @} | |
*/ | |
#endif /* USE_FULL_LL_DRIVER */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* TIM1 || TIM8 || TIM2 || TIM3 || TIM4 || TIM5 ||TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 || TIM6 || TIM7 */ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F7xx_LL_TIM_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |