/** | |
****************************************************************************** | |
* @file stm32l4xx_hal_comp.h | |
* @author MCD Application Team | |
* @version V1.7.1 | |
* @date 21-April-2017 | |
* @brief Header file of COMP HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32L4xx_HAL_COMP_H | |
#define __STM32L4xx_HAL_COMP_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32l4xx_hal_def.h" | |
/** @addtogroup STM32L4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup COMP | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup COMP_Exported_Types COMP Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief COMP Init structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t WindowMode; /*!< Set window mode of a pair of comparators instances | |
(2 consecutive instances odd and even COMP<x> and COMP<x+1>). | |
Note: HAL COMP driver allows to set window mode from any COMP instance of the pair of COMP instances composing window mode. | |
This parameter can be a value of @ref COMP_WindowMode */ | |
uint32_t Mode; /*!< Set comparator operating mode to adjust power and speed. | |
Note: For the characteritics of comparator power modes | |
(propagation delay and power consumption), refer to device datasheet. | |
This parameter can be a value of @ref COMP_PowerMode */ | |
uint32_t NonInvertingInput; /*!< Set comparator input plus (non-inverting input). | |
This parameter can be a value of @ref COMP_InputPlus */ | |
uint32_t InvertingInput; /*!< Set comparator input minus (inverting input). | |
This parameter can be a value of @ref COMP_InputMinus */ | |
uint32_t Hysteresis; /*!< Set comparator hysteresis mode of the input minus. | |
This parameter can be a value of @ref COMP_Hysteresis */ | |
uint32_t OutputPol; /*!< Set comparator output polarity. | |
This parameter can be a value of @ref COMP_OutputPolarity */ | |
uint32_t BlankingSrce; /*!< Set comparator blanking source. | |
This parameter can be a value of @ref COMP_BlankingSrce */ | |
uint32_t TriggerMode; /*!< Set the comparator output triggering External Interrupt Line (EXTI). | |
This parameter can be a value of @ref COMP_EXTI_TriggerMode */ | |
}COMP_InitTypeDef; | |
/** | |
* @brief HAL COMP state machine: HAL COMP states definition | |
*/ | |
#define COMP_STATE_BITFIELD_LOCK ((uint32_t)0x10) | |
typedef enum | |
{ | |
HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized */ | |
HAL_COMP_STATE_RESET_LOCKED = (HAL_COMP_STATE_RESET | COMP_STATE_BITFIELD_LOCK), /*!< COMP not yet initialized and configuration is locked */ | |
HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ | |
HAL_COMP_STATE_READY_LOCKED = (HAL_COMP_STATE_READY | COMP_STATE_BITFIELD_LOCK), /*!< COMP initialized but configuration is locked */ | |
HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ | |
HAL_COMP_STATE_BUSY_LOCKED = (HAL_COMP_STATE_BUSY | COMP_STATE_BITFIELD_LOCK) /*!< COMP is running and configuration is locked */ | |
}HAL_COMP_StateTypeDef; | |
/** | |
* @brief COMP Handle Structure definition | |
*/ | |
typedef struct | |
{ | |
COMP_TypeDef *Instance; /*!< Register base address */ | |
COMP_InitTypeDef Init; /*!< COMP required parameters */ | |
HAL_LockTypeDef Lock; /*!< Locking object */ | |
__IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ | |
} COMP_HandleTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup COMP_Exported_Constants COMP Exported Constants | |
* @{ | |
*/ | |
/** @defgroup COMP_WindowMode COMP Window Mode | |
* @{ | |
*/ | |
#define COMP_WINDOWMODE_DISABLE ((uint32_t)0x00000000) /*!< Window mode disable: Comparators instances pair COMP1 and COMP2 are independent */ | |
#define COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */ | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_PowerMode COMP power mode | |
* @{ | |
*/ | |
/* Note: For the characteritics of comparator power modes */ | |
/* (propagation delay and power consumption), */ | |
/* refer to device datasheet. */ | |
#define COMP_POWERMODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */ | |
#define COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< Medium Speed */ | |
#define COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_PWRMODE) /*!< Ultra-low power mode */ | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_InputPlus COMP input plus (non-inverting input) | |
* @{ | |
*/ | |
#define COMP_INPUT_PLUS_IO1 ((uint32_t)0x00000000) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1, pin PB4 for COMP2) */ | |
#define COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2) */ | |
#if defined(COMP_CSR_INPSEL_1) | |
#define COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2) */ | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_InputMinus COMP input minus (inverting input) | |
* @{ | |
*/ | |
#define COMP_INPUT_MINUS_1_4VREFINT ( COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/4 VrefInt */ | |
#define COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/2 VrefInt */ | |
#define COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */ | |
#define COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */ | |
#define COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */ | |
#if defined(DAC_CHANNEL2_SUPPORT) | |
#define COMP_INPUT_MINUS_DAC1_CH2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */ | |
#endif | |
#define COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */ | |
#define COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PB7 for COMP2) */ | |
#if defined(COMP_CSR_INMESEL_1) | |
#define COMP_INPUT_MINUS_IO3 ( COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */ | |
#define COMP_INPUT_MINUS_IO4 (COMP_CSR_INMESEL_1 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO4 (pin PA4 for COMP1, pin PA4 for COMP2) */ | |
#define COMP_INPUT_MINUS_IO5 (COMP_CSR_INMESEL_1 | COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO5 (pin PA5 for COMP1, pin PA5 for COMP2) */ | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_Hysteresis COMP hysteresis | |
* @{ | |
*/ | |
#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */ | |
#define COMP_HYSTERESIS_LOW (COMP_CSR_HYST_0) /*!< Hysteresis level low */ | |
#define COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1) /*!< Hysteresis level medium */ | |
#define COMP_HYSTERESIS_HIGH (COMP_CSR_HYST) /*!< Hysteresis level high */ | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_OutputPolarity COMP output Polarity | |
* @{ | |
*/ | |
#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output level is not inverted (comparator output is high when the input plus is at a higher voltage than the input minus) */ | |
#define COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output level is inverted (comparator output is low when the input plus is at a higher voltage than the input minus) */ | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_BlankingSrce COMP blanking source | |
* @{ | |
*/ | |
/* Note: Some blanking sources are not available depending on timer */ | |
/* availability or devices specificities */ | |
/* (STM32L43xx, STM32L44xx, STM32L45xx, STM32L46xx) */ | |
#define COMP_BLANKINGSRC_NONE ((uint32_t)0x00000000) /*!< No blanking source */ | |
/* Blanking sources for COMP instance: COMP1 */ | |
#define COMP_BLANKINGSRC_TIM1_OC5_COMP1 (COMP_CSR_BLANKING_0) /*!< Blanking source for COMP1: TIM1 OC5 selected as blanking source for comparator */ | |
#define COMP_BLANKINGSRC_TIM2_OC3_COMP1 (COMP_CSR_BLANKING_1) /*!< Blanking source for COMP1: TIM2 OC3 selected as blanking source for comparator */ | |
#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) || \ | |
defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ | |
defined(STM32L496xx) || defined(STM32L4A6xx) | |
#define COMP_BLANKINGSRC_TIM3_OC3_COMP1 (COMP_CSR_BLANKING_2) /*!< Blanking source for COMP1: TIM3 OC3 selected as blanking source for comparator */ | |
#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ | |
/* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ | |
/* STM32L496xx || STM32L4A6xx */ | |
/* Blanking sources for COMP instance: COMP2 */ | |
#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) || \ | |
defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ | |
defined(STM32L496xx) || defined(STM32L4A6xx) | |
#define COMP_BLANKINGSRC_TIM3_OC4_COMP2 (COMP_CSR_BLANKING_0) /*!< Blanking source for COMP2: TIM3 OC4 selected as blanking source for comparator */ | |
#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ | |
/* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ | |
/* STM32L496xx || STM32L4A6xx */ | |
#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ | |
defined(STM32L496xx) || defined(STM32L4A6xx) | |
#define COMP_BLANKINGSRC_TIM8_OC5_COMP2 (COMP_CSR_BLANKING_1) /*!< Blanking source for COMP2: TIM8 OC5 selected as blanking source for comparator */ | |
#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ | |
/* STM32L496xx || STM32L4A6xx */ | |
#define COMP_BLANKINGSRC_TIM15_OC1_COMP2 (COMP_CSR_BLANKING_2) /*!< Blanking source for COMP2: TIM15 OC1 selected as blanking source for comparator */ | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_OutputLevel COMP Output Level | |
* @{ | |
*/ | |
/* Note: Comparator output level values are fixed to "0" and "1", */ | |
/* corresponding COMP register bit is managed by HAL function to match */ | |
/* with these values (independently of bit position in register). */ | |
/* When output polarity is not inverted, comparator output is low when | |
the input plus is at a lower voltage than the input minus */ | |
#define COMP_OUTPUT_LEVEL_LOW ((uint32_t)0x00000000) | |
/* When output polarity is not inverted, comparator output is high when | |
the input plus is at a higher voltage than the input minus */ | |
#define COMP_OUTPUT_LEVEL_HIGH ((uint32_t)0x00000001) | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_EXTI_TriggerMode COMP output to EXTI | |
* @{ | |
*/ | |
#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< Comparator output triggering no External Interrupt Line */ | |
#define COMP_TRIGGERMODE_IT_RISING (COMP_EXTI_IT | COMP_EXTI_RISING) /*!< Comparator output triggering External Interrupt Line event with interruption, on rising edge */ | |
#define COMP_TRIGGERMODE_IT_FALLING (COMP_EXTI_IT | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event with interruption, on falling edge */ | |
#define COMP_TRIGGERMODE_IT_RISING_FALLING (COMP_EXTI_IT | COMP_EXTI_RISING | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event with interruption, on both rising and falling edges */ | |
#define COMP_TRIGGERMODE_EVENT_RISING (COMP_EXTI_EVENT | COMP_EXTI_RISING) /*!< Comparator output triggering External Interrupt Line event only (without interruption), on rising edge */ | |
#define COMP_TRIGGERMODE_EVENT_FALLING (COMP_EXTI_EVENT | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event only (without interruption), on falling edge */ | |
#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (COMP_EXTI_EVENT | COMP_EXTI_RISING | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event only (without interruption), on both rising and falling edges */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup COMP_Exported_Macros COMP Exported Macros | |
* @{ | |
*/ | |
/** @defgroup COMP_Handle_Management COMP Handle Management | |
* @{ | |
*/ | |
/** @brief Reset COMP handle state. | |
* @param __HANDLE__ COMP handle | |
* @retval None | |
*/ | |
#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) | |
/** | |
* @brief Enable the specified comparator. | |
* @param __HANDLE__ COMP handle | |
* @retval None | |
*/ | |
#define __HAL_COMP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN) | |
/** | |
* @brief Disable the specified comparator. | |
* @param __HANDLE__ COMP handle | |
* @retval None | |
*/ | |
#define __HAL_COMP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN) | |
/** | |
* @brief Lock the specified comparator configuration. | |
* @note Using this macro induce HAL COMP handle state machine being no | |
* more in line with COMP instance state. | |
* To keep HAL COMP handle state machine updated, it is recommended | |
* to use function "HAL_COMP_Lock')". | |
* @param __HANDLE__ COMP handle | |
* @retval None | |
*/ | |
#define __HAL_COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) | |
/** | |
* @brief Check whether the specified comparator is locked. | |
* @param __HANDLE__ COMP handle | |
* @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked | |
*/ | |
#define __HAL_COMP_IS_LOCKED(__HANDLE__) (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) == COMP_CSR_LOCK) | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_Exti_Management COMP external interrupt line management | |
* @{ | |
*/ | |
/** | |
* @brief Enable the COMP1 EXTI line rising edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Disable the COMP1 EXTI line rising edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Enable the COMP1 EXTI line falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Disable the COMP1 EXTI line falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Enable the COMP1 EXTI line rising & falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ | |
__HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \ | |
__HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \ | |
} while(0) | |
/** | |
* @brief Disable the COMP1 EXTI line rising & falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ | |
__HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \ | |
__HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \ | |
} while(0) | |
/** | |
* @brief Enable the COMP1 EXTI line in interrupt mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Disable the COMP1 EXTI line in interrupt mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Generate a software interrupt on the COMP1 EXTI line. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Enable the COMP1 EXTI line in event mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Disable the COMP1 EXTI line in event mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Check whether the COMP1 EXTI line flag is set. | |
* @retval RESET or SET | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Clear the COMP1 EXTI flag. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, COMP_EXTI_LINE_COMP1) | |
/** | |
* @brief Enable the COMP2 EXTI line rising edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Disable the COMP2 EXTI line rising edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Enable the COMP2 EXTI line falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Disable the COMP2 EXTI line falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Enable the COMP2 EXTI line rising & falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ | |
__HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \ | |
__HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \ | |
} while(0) | |
/** | |
* @brief Disable the COMP2 EXTI line rising & falling edge trigger. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ | |
__HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \ | |
__HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \ | |
} while(0) | |
/** | |
* @brief Enable the COMP2 EXTI line in interrupt mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Disable the COMP2 EXTI line in interrupt mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Generate a software interrupt on the COMP2 EXTI line. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Enable the COMP2 EXTI line in event mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Disable the COMP2 EXTI line in event mode. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Check whether the COMP2 EXTI line flag is set. | |
* @retval RESET or SET | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @brief Clear the COMP2 EXTI flag. | |
* @retval None | |
*/ | |
#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, COMP_EXTI_LINE_COMP2) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup COMP_Private_Constants COMP Private Constants | |
* @{ | |
*/ | |
/** @defgroup COMP_ExtiLine COMP EXTI Lines | |
* @{ | |
*/ | |
#define COMP_EXTI_LINE_COMP1 (EXTI_IMR1_IM21) /*!< EXTI line 21 connected to COMP1 output */ | |
#define COMP_EXTI_LINE_COMP2 (EXTI_IMR1_IM22) /*!< EXTI line 22 connected to COMP2 output */ | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_ExtiLine COMP EXTI Lines | |
* @{ | |
*/ | |
#define COMP_EXTI_IT ((uint32_t) 0x01) /*!< EXTI line event with interruption */ | |
#define COMP_EXTI_EVENT ((uint32_t) 0x02) /*!< EXTI line event only (without interruption) */ | |
#define COMP_EXTI_RISING ((uint32_t) 0x10) /*!< EXTI line event on rising edge */ | |
#define COMP_EXTI_FALLING ((uint32_t) 0x20) /*!< EXTI line event on falling edge */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup COMP_Private_Macros COMP Private Macros | |
* @{ | |
*/ | |
/** @defgroup COMP_GET_EXTI_LINE COMP private macros to get EXTI line associated with comparators | |
* @{ | |
*/ | |
/** | |
* @brief Get the specified EXTI line for a comparator instance. | |
* @param __INSTANCE__ specifies the COMP instance. | |
* @retval value of @ref COMP_ExtiLine | |
*/ | |
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? \ | |
COMP_EXTI_LINE_COMP1 : COMP_EXTI_LINE_COMP2) | |
/** | |
* @} | |
*/ | |
/** @defgroup COMP_IS_COMP_Definitions COMP private macros to check input parameters | |
* @{ | |
*/ | |
#define IS_COMP_WINDOWMODE(__WINDOWMODE__) (((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE) || \ | |
((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON) ) | |
#define IS_COMP_POWERMODE(__POWERMODE__) (((__POWERMODE__) == COMP_POWERMODE_HIGHSPEED) || \ | |
((__POWERMODE__) == COMP_POWERMODE_MEDIUMSPEED) || \ | |
((__POWERMODE__) == COMP_POWERMODE_ULTRALOWPOWER) ) | |
#if defined(COMP_CSR_INPSEL_1) | |
#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \ | |
((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2) || \ | |
((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO3)) | |
#else | |
#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \ | |
((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2)) | |
#endif | |
/* Note: On this STM32 family, comparator input minus parameters are */ | |
/* the same on all COMP instances. */ | |
/* However, comparator instance kept as macro parameter for */ | |
/* compatibility with other STM32 families. */ | |
#if defined(COMP_CSR_INMESEL_1) && defined(DAC_CHANNEL2_SUPPORT) | |
#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO4) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO5)) | |
#elif defined(COMP_CSR_INMESEL_1) | |
#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO4) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO5)) | |
#elif defined(DAC_CHANNEL2_SUPPORT) | |
#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)) | |
#else | |
#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) || \ | |
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)) | |
#endif | |
#define IS_COMP_HYSTERESIS(__HYSTERESIS__) (((__HYSTERESIS__) == COMP_HYSTERESIS_NONE) || \ | |
((__HYSTERESIS__) == COMP_HYSTERESIS_LOW) || \ | |
((__HYSTERESIS__) == COMP_HYSTERESIS_MEDIUM) || \ | |
((__HYSTERESIS__) == COMP_HYSTERESIS_HIGH)) | |
#define IS_COMP_OUTPUTPOL(__POL__) (((__POL__) == COMP_OUTPUTPOL_NONINVERTED) || \ | |
((__POL__) == COMP_OUTPUTPOL_INVERTED)) | |
#if defined(STM32L431xx) || defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) | |
#define IS_COMP_BLANKINGSRCE(__SOURCE__) (((__SOURCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)) | |
#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __BLANKINGSRCE__) \ | |
((((__INSTANCE__) == COMP1) && \ | |
(((__BLANKINGSRCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1))) \ | |
|| \ | |
(((__INSTANCE__) == COMP2) && \ | |
(((__BLANKINGSRCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)))) | |
#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ | |
#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) | |
#define IS_COMP_BLANKINGSRCE(__SOURCE__) (((__SOURCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)) | |
#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __BLANKINGSRCE__) \ | |
((((__INSTANCE__) == COMP1) && \ | |
(((__BLANKINGSRCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1))) \ | |
|| \ | |
(((__INSTANCE__) == COMP2) && \ | |
(((__BLANKINGSRCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)))) | |
#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ | |
#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ | |
defined(STM32L496xx) || defined(STM32L4A6xx) | |
#define IS_COMP_BLANKINGSRCE(__SOURCE__) (((__SOURCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM8_OC5_COMP2) || \ | |
((__SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)) | |
#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __BLANKINGSRCE__) \ | |
((((__INSTANCE__) == COMP1) && \ | |
(((__BLANKINGSRCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1))) \ | |
|| \ | |
(((__INSTANCE__) == COMP2) && \ | |
(((__BLANKINGSRCE__) == COMP_BLANKINGSRC_NONE) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM8_OC5_COMP2) || \ | |
((__BLANKINGSRCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)))) | |
#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ | |
/* STM32L496xx || STM32L4A6xx */ | |
#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \ | |
((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \ | |
((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \ | |
((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \ | |
((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \ | |
((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \ | |
((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING)) | |
#define IS_COMP_OUTPUT_LEVEL(__OUTPUT_LEVEL__) (((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_LOW) || \ | |
((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_HIGH)) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup COMP_Exported_Functions | |
* @{ | |
*/ | |
/** @addtogroup COMP_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions **********************************/ | |
HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); | |
HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); | |
void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); | |
void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); | |
/** | |
* @} | |
*/ | |
/* IO operation functions *****************************************************/ | |
/** @addtogroup COMP_Exported_Functions_Group2 | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); | |
HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); | |
void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); | |
/** | |
* @} | |
*/ | |
/* Peripheral Control functions ************************************************/ | |
/** @addtogroup COMP_Exported_Functions_Group3 | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); | |
uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); | |
/* Callback in interrupt mode */ | |
void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); | |
/** | |
* @} | |
*/ | |
/* Peripheral State functions **************************************************/ | |
/** @addtogroup COMP_Exported_Functions_Group4 | |
* @{ | |
*/ | |
HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32L4xx_HAL_COMP_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |