/** | |
****************************************************************************** | |
* @file stm32l4xx_hal_smartcard.h | |
* @author MCD Application Team | |
* @version V1.7.1 | |
* @date 21-April-2017 | |
* @brief Header file of SMARTCARD HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32L4xx_HAL_SMARTCARD_H | |
#define __STM32L4xx_HAL_SMARTCARD_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32l4xx_hal_def.h" | |
/** @addtogroup STM32L4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup SMARTCARD | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief SMARTCARD Init Structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. | |
The baud rate register is computed using the following formula: | |
Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */ | |
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. | |
This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */ | |
uint32_t StopBits; /*!< Specifies the number of stop bits. | |
This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ | |
uint16_t Parity; /*!< Specifies the parity mode. | |
This parameter can be a value of @ref SMARTCARD_Parity | |
@note The parity is enabled by default (PCE is forced to 1). | |
Since the WordLength is forced to 8 bits + parity, M is | |
forced to 1 and the parity bit is the 9th bit. */ | |
uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. | |
This parameter can be a value of @ref SMARTCARD_Mode */ | |
uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. | |
This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ | |
uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. | |
This parameter can be a value of @ref SMARTCARD_Clock_Phase */ | |
uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted | |
data bit (MSB) has to be output on the SCLK pin in synchronous mode. | |
This parameter can be a value of @ref SMARTCARD_Last_Bit */ | |
uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. | |
Selecting the single sample method increases the receiver tolerance to clock | |
deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */ | |
uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. */ | |
uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ | |
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled | |
in case of parity error. | |
This parameter can be a value of @ref SMARTCARD_NACK_Enable */ | |
uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. | |
This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ | |
uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: | |
it is used to implement the Character Wait Time (CWT) and | |
Block Wait Time (BWT). It is coded over 24 bits. */ | |
uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. | |
This parameter can be any value from 0x0 to 0xFF */ | |
uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in | |
receive and transmit mode). When set to 0, retransmission is | |
disabled. Otherwise, its maximum value is 7 (before signalling | |
an error) */ | |
}SMARTCARD_InitTypeDef; | |
/** | |
* @brief SMARTCARD advanced features initalization structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several | |
advanced features may be initialized at the same time. This parameter | |
can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */ | |
uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. | |
This parameter can be a value of @ref SMARTCARD_Tx_Inv */ | |
uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. | |
This parameter can be a value of @ref SMARTCARD_Rx_Inv */ | |
uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic | |
vs negative/inverted logic). | |
This parameter can be a value of @ref SMARTCARD_Data_Inv */ | |
uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. | |
This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ | |
uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. | |
This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ | |
uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. | |
This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ | |
uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. | |
This parameter can be a value of @ref SMARTCARD_MSB_First */ | |
uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when | |
relevant flag is available) or once guard time period has elapsed. | |
This parameter can be a value of @ref SMARTCARDEx_Transmission_Completion_Indication. */ | |
}SMARTCARD_AdvFeatureInitTypeDef; | |
/** | |
* @brief HAL SMARTCARD State structures definition | |
* @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState. | |
* - gState contains SMARTCARD state information related to global Handle management | |
* and also information related to Tx operations. | |
* gState value coding follow below described bitmap : | |
* b7-b6 Error information | |
* 00 : No Error | |
* 01 : (Not Used) | |
* 10 : Timeout | |
* 11 : Error | |
* b5 IP initilisation status | |
* 0 : Reset (IP not initialized) | |
* 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called) | |
* b4-b3 (not used) | |
* xx : Should be set to 00 | |
* b2 Intrinsic process state | |
* 0 : Ready | |
* 1 : Busy (IP busy with some configuration or internal operations) | |
* b1 (not used) | |
* x : Should be set to 0 | |
* b0 Tx state | |
* 0 : Ready (no Tx operation ongoing) | |
* 1 : Busy (Tx operation ongoing) | |
* - RxState contains information related to Rx operations. | |
* RxState value coding follow below described bitmap : | |
* b7-b6 (not used) | |
* xx : Should be set to 00 | |
* b5 IP initilisation status | |
* 0 : Reset (IP not initialized) | |
* 1 : Init done (IP not initialized) | |
* b4-b2 (not used) | |
* xxx : Should be set to 000 | |
* b1 Rx state | |
* 0 : Ready (no Rx operation ongoing) | |
* 1 : Busy (Rx operation ongoing) | |
* b0 (not used) | |
* x : Should be set to 0. | |
*/ | |
typedef enum | |
{ | |
HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not initialized | |
Value is allowed for gState and RxState */ | |
HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use | |
Value is allowed for gState and RxState */ | |
HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing | |
Value is allowed for gState only */ | |
HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing | |
Value is allowed for gState only */ | |
HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing | |
Value is allowed for RxState only */ | |
HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing | |
Not to be used for neither gState nor RxState. | |
Value is result of combination (Or) between gState and RxState values */ | |
HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state | |
Value is allowed for gState only */ | |
HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error | |
Value is allowed for gState only */ | |
}HAL_SMARTCARD_StateTypeDef; | |
/** | |
* @brief HAL SMARTCARD Error Code structure definition | |
*/ | |
typedef enum | |
{ | |
HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */ | |
HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */ | |
HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */ | |
HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */ | |
HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */ | |
HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */ | |
HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */ | |
}HAL_SMARTCARD_ErrorTypeDef; | |
/** | |
* @brief SMARTCARD handle Structure definition | |
*/ | |
typedef struct | |
{ | |
USART_TypeDef *Instance; /*!< USART registers base address */ | |
SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ | |
SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ | |
uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ | |
uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ | |
__IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ | |
uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ | |
uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ | |
__IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ | |
DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ | |
DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ | |
HAL_LockTypeDef Lock; /*!< Locking object */ | |
__IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management | |
and also related to Tx operations. | |
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ | |
__IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. | |
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ | |
uint32_t ErrorCode; /*!< SmartCard Error code */ | |
}SMARTCARD_HandleTypeDef; | |
/** | |
* @brief SMARTCARD clock sources | |
*/ | |
typedef enum | |
{ | |
SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ | |
SMARTCARD_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */ | |
SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ | |
SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ | |
SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */ | |
SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */ | |
}SMARTCARD_ClockSourceTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants | |
* @{ | |
*/ | |
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length | |
* @{ | |
*/ | |
#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< SMARTCARD frame length */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits | |
* @{ | |
*/ | |
#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /*!< SMARTCARD frame with 0.5 stop bit */ | |
#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< SMARTCARD frame with 1.5 stop bits */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Parity SMARTCARD Parity | |
* @{ | |
*/ | |
#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< SMARTCARD frame even parity */ | |
#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< SMARTCARD frame odd parity */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode | |
* @{ | |
*/ | |
#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) /*!< SMARTCARD RX mode */ | |
#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) /*!< SMARTCARD TX mode */ | |
#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< SMARTCARD RX and TX mode */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity | |
* @{ | |
*/ | |
#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000) /*!< SMARTCARD frame low polarity */ | |
#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) /*!< SMARTCARD frame high polarity */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase | |
* @{ | |
*/ | |
#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SMARTCARD frame phase on first clock transition */ | |
#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) /*!< SMARTCARD frame phase on second clock transition */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit | |
* @{ | |
*/ | |
#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000) /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ | |
#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method | |
* @{ | |
*/ | |
#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) /*!< SMARTCARD frame one-bit sample disabled */ | |
#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< SMARTCARD frame one-bit sample enabled */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable | |
* @{ | |
*/ | |
#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) /*!< SMARTCARD NACK transmission disabled */ | |
#define SMARTCARD_NACK_DISABLE ((uint32_t)0x00000000) /*!< SMARTCARD NACK transmission enabled */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable | |
* @{ | |
*/ | |
#define SMARTCARD_TIMEOUT_DISABLE ((uint32_t)0x00000000) /*!< SMARTCARD receiver timeout disabled */ | |
#define SMARTCARD_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /*!< SMARTCARD receiver timeout enabled */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) /*!< TX pin active level inversion disable */ | |
#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /*!< TX pin active level inversion enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) /*!< RX pin active level inversion disable */ | |
#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /*!< RX pin active level inversion enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) /*!< Binary data inversion disable */ | |
#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /*!< Binary data inversion enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) /*!< TX/RX pins swap disable */ | |
#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /*!< TX/RX pins swap enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) /*!< RX overrun enable */ | |
#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /*!< RX overrun disable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) /*!< DMA enable on Reception Error */ | |
#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /*!< DMA disable on Reception Error */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first | |
* @{ | |
*/ | |
#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) /*!< Most significant bit sent/received first disable */ | |
#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /*!< Most significant bit sent/received first enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters | |
* @{ | |
*/ | |
#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive data flush request */ | |
#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush request */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register | |
* @{ | |
*/ | |
#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17) /*!< SMARTCARD auto retry counter LSB position in CR3 register */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register | |
* @{ | |
*/ | |
#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8) /*!< SMARTCARD guard time value LSB position in GTPR register */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register | |
* @{ | |
*/ | |
#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24) /*!< SMARTCARD block length LSB position in RTOR register */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask | |
* @{ | |
*/ | |
#define SMARTCARD_IT_MASK ((uint16_t)0x001F) /*!< SMARTCARD interruptions flags mask */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macros -----------------------------------------------------------*/ | |
/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros | |
* @{ | |
*/ | |
/** @brief Reset SMARTCARD handle states. | |
* @param __HANDLE__: SMARTCARD handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ | |
(__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ | |
(__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ | |
} while(0) | |
/** @brief Flush the Smartcard Data registers. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ | |
do{ \ | |
SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ | |
SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ | |
} while(0) | |
/** @brief Clear the specified SMARTCARD pending flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be any combination of the following values: | |
* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag | |
* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag | |
* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag | |
* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag | |
* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag | |
* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) | |
@endif | |
* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag | |
* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) | |
/** @brief Clear the SMARTCARD PE pending flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) | |
/** @brief Clear the SMARTCARD FE pending flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) | |
/** @brief Clear the SMARTCARD NE pending flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) | |
/** @brief Clear the SMARTCARD ORE pending flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) | |
/** @brief Clear the SMARTCARD IDLE pending flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) | |
/** @brief Check whether the specified Smartcard flag is set or not. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available) | |
@endif | |
* @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag | |
* @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag | |
* @arg @ref SMARTCARD_FLAG_BUSY Busy flag | |
* @arg @ref SMARTCARD_FLAG_EOBF End of block flag | |
* @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag | |
* @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag | |
* @arg @ref SMARTCARD_FLAG_TC Transmission complete flag | |
* @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag | |
* @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag | |
* @arg @ref SMARTCARD_FLAG_ORE Overrun error flag | |
* @arg @ref SMARTCARD_FLAG_NE Noise error flag | |
* @arg @ref SMARTCARD_FLAG_FE Framing error flag | |
* @arg @ref SMARTCARD_FLAG_PE Parity error flag | |
* @retval The new state of __FLAG__ (TRUE or FALSE). | |
*/ | |
#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) | |
/** @brief Enable the specified SmartCard interrupt. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable. | |
* This parameter can be one of the following values: | |
* @arg @ref SMARTCARD_IT_EOB End of block interrupt | |
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt | |
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt | |
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) | |
@endif | |
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt | |
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt | |
* @arg @ref SMARTCARD_IT_PE Parity error interrupt | |
* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ | |
((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ | |
((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) | |
/** @brief Disable the specified SmartCard interrupt. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable. | |
* This parameter can be one of the following values: | |
* @arg @ref SMARTCARD_IT_EOB End of block interrupt | |
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt | |
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt | |
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) | |
@endif | |
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt | |
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt | |
* @arg @ref SMARTCARD_IT_PE Parity error interrupt | |
* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ | |
((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ | |
((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) | |
/** @brief Check whether the specified SmartCard interrupt has occurred or not. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __IT__: specifies the SMARTCARD interrupt to check. | |
* This parameter can be one of the following values: | |
* @arg @ref SMARTCARD_IT_EOB End of block interrupt | |
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt | |
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt | |
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) | |
@endif | |
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt | |
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt | |
* @arg @ref SMARTCARD_IT_ORE Overrun error interrupt | |
* @arg @ref SMARTCARD_IT_NE Noise error interrupt | |
* @arg @ref SMARTCARD_IT_FE Framing error interrupt | |
* @arg @ref SMARTCARD_IT_PE Parity error interrupt | |
* @retval The new state of __IT__ (TRUE or FALSE). | |
*/ | |
#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) | |
/** @brief Check whether the specified SmartCard interrupt source is enabled or not. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __IT__: specifies the SMARTCARD interrupt source to check. | |
* This parameter can be one of the following values: | |
* @arg @ref SMARTCARD_IT_EOB End of block interrupt | |
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt | |
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt | |
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) | |
@endif | |
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt | |
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt | |
* @arg @ref SMARTCARD_IT_ERR Framing, overrun or noise error interrupt | |
* @arg @ref SMARTCARD_IT_PE Parity error interrupt | |
* @retval The new state of __IT__ (TRUE or FALSE). | |
*/ | |
#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \ | |
(((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \ | |
(__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK))) | |
/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set | |
* to clear the corresponding interrupt. | |
* This parameter can be one of the following values: | |
* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag | |
* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag | |
* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag | |
* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag | |
* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag | |
* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag | |
@if STM32L443xx | |
* @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) | |
@endif | |
* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag | |
* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) | |
/** @brief Set a specific SMARTCARD request flag. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @param __REQ__: specifies the request flag to set | |
* This parameter can be one of the following values: | |
* @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request | |
* @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request | |
* | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) | |
/** @brief Enable the SMARTCARD one bit sample method. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) | |
/** @brief Disable the SMARTCARD one bit sample method. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) | |
/** @brief Enable the USART associated to the SMARTCARD Handle. | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) | |
/** @brief Disable the USART associated to the SMARTCARD Handle | |
* @param __HANDLE__: specifies the SMARTCARD Handle. | |
* @retval None | |
*/ | |
#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) | |
/** | |
* @} | |
*/ | |
/* Private macros -------------------------------------------------------------*/ | |
/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros | |
* @{ | |
*/ | |
/** @brief Check the Baud rate range. | |
* @note The maximum Baud Rate is derived from the maximum clock on L4 (80 MHz) | |
* divided by the oversampling used on the SMARTCARD (i.e. 16). | |
* @param __BAUDRATE__: Baud rate set by the configuration function. | |
* @retval Test result (TRUE or FALSE) | |
*/ | |
#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 5000001) | |
/** @brief Check the block length range. | |
* @note The maximum SMARTCARD block length is 0xFF. | |
* @param __LENGTH__: block length. | |
* @retval Test result (TRUE or FALSE) | |
*/ | |
#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF) | |
/** @brief Check the receiver timeout value. | |
* @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. | |
* @param __TIMEOUTVALUE__: receiver timeout value. | |
* @retval Test result (TRUE or FALSE) | |
*/ | |
#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF) | |
/** @brief Check the SMARTCARD autoretry counter value. | |
* @note The maximum number of retransmissions is 0x7. | |
* @param __COUNT__: number of retransmissions. | |
* @retval Test result (TRUE or FALSE) | |
*/ | |
#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7) | |
/** | |
* @brief Ensure that SMARTCARD frame length is valid. | |
* @param __LENGTH__: SMARTCARD frame length. | |
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) | |
*/ | |
#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) | |
/** | |
* @brief Ensure that SMARTCARD frame number of stop bits is valid. | |
* @param __STOPBITS__: SMARTCARD frame number of stop bits. | |
* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) | |
*/ | |
#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ | |
((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) | |
/** | |
* @brief Ensure that SMARTCARD frame parity is valid. | |
* @param __PARITY__: SMARTCARD frame parity. | |
* @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) | |
*/ | |
#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ | |
((__PARITY__) == SMARTCARD_PARITY_ODD)) | |
/** | |
* @brief Ensure that SMARTCARD communication mode is valid. | |
* @param __MODE__: SMARTCARD communication mode. | |
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) | |
*/ | |
#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint16_t)0xFFF3) == 0x00) && ((__MODE__) != (uint16_t)0x00)) | |
/** | |
* @brief Ensure that SMARTCARD frame polarity is valid. | |
* @param __CPOL__: SMARTCARD frame polarity. | |
* @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) | |
*/ | |
#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) | |
/** | |
* @brief Ensure that SMARTCARD frame phase is valid. | |
* @param __CPHA__: SMARTCARD frame phase. | |
* @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) | |
*/ | |
#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) | |
/** | |
* @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. | |
* @param __LASTBIT__: SMARTCARD frame last bit clock pulse setting. | |
* @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) | |
*/ | |
#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ | |
((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD frame sampling is valid. | |
* @param __ONEBIT__: SMARTCARD frame sampling. | |
* @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ | |
((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD NACK transmission setting is valid. | |
* @param __NACK__: SMARTCARD NACK transmission setting. | |
* @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) | |
*/ | |
#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ | |
((__NACK__) == SMARTCARD_NACK_DISABLE)) | |
/** | |
* @brief Ensure that SMARTCARD receiver timeout setting is valid. | |
* @param __TIMEOUT__: SMARTCARD receiver timeout setting. | |
* @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) | |
*/ | |
#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ | |
((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD advanced features initialization is valid. | |
* @param __INIT__: SMARTCARD advanced features initialization. | |
* @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ | |
SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ | |
SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ | |
SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ | |
SMARTCARD_ADVFEATURE_SWAP_INIT | \ | |
SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ | |
SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ | |
SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) | |
/** | |
* @brief Ensure that SMARTCARD frame TX inversion setting is valid. | |
* @param __TXINV__: SMARTCARD frame TX inversion setting. | |
* @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ | |
((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD frame RX inversion setting is valid. | |
* @param __RXINV__: SMARTCARD frame RX inversion setting. | |
* @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ | |
((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD frame data inversion setting is valid. | |
* @param __DATAINV__: SMARTCARD frame data inversion setting. | |
* @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ | |
((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. | |
* @param __SWAP__: SMARTCARD frame RX/TX pins swap setting. | |
* @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ | |
((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD frame overrun setting is valid. | |
* @param __OVERRUN__: SMARTCARD frame overrun setting. | |
* @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) | |
*/ | |
#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ | |
((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) | |
/** | |
* @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. | |
* @param __DMA__: SMARTCARD DMA enabling or disabling on error setting. | |
* @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ | |
((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) | |
/** | |
* @brief Ensure that SMARTCARD frame MSB first setting is valid. | |
* @param __MSBFIRST__: SMARTCARD frame MSB first setting. | |
* @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) | |
*/ | |
#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ | |
((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) | |
/** | |
* @brief Ensure that SMARTCARD request parameter is valid. | |
* @param __PARAM__: SMARTCARD request parameter. | |
* @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) | |
*/ | |
#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ | |
((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) | |
/** | |
* @} | |
*/ | |
/* Include SMARTCARD HAL Extended module */ | |
#include "stm32l4xx_hal_smartcard_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup SMARTCARD_Exported_Functions | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions ****************************/ | |
/** @addtogroup SMARTCARD_Exported_Functions_Group1 | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); | |
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); | |
/** | |
* @} | |
*/ | |
/* IO operation functions *****************************************************/ | |
/** @addtogroup SMARTCARD_Exported_Functions_Group2 | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); | |
/* Transfer Abort functions */ | |
HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); | |
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); | |
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); | |
HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); | |
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); | |
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard); | |
void HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard); | |
/** | |
* @} | |
*/ | |
/* Peripheral Control functions ***********************************************/ | |
/* Peripheral State and Error functions ***************************************/ | |
/** @addtogroup SMARTCARD_Exported_Functions_Group4 | |
* @{ | |
*/ | |
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard); | |
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32L4xx_HAL_SMARTCARD_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |