/** | |
****************************************************************************** | |
* @file stm32l4xx_hal_swpmi.h | |
* @author MCD Application Team | |
* @version V1.7.1 | |
* @date 21-April-2017 | |
* @brief Header file of SWPMI HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32L4xx_HAL_SWPMI_H | |
#define __STM32L4xx_HAL_SWPMI_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#if defined(STM32L431xx) || defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) || \ | |
defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ | |
defined(STM32L496xx) || defined(STM32L4A6xx) | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32l4xx_hal_def.h" | |
/** @addtogroup STM32L4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup SWPMI | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup SWPMI_Exported_Types SWPMI Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief SWPMI Init Structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t VoltageClass; /*!< Specifies the SWP Voltage Class. | |
This parameter can be a value of @ref SWPMI_Voltage_Class */ | |
uint32_t BitRate; /*!< Specifies the SWPMI Bitrate. | |
This parameter must be a number between 0 and 63. | |
The Bitrate is computed using the following formula: | |
SWPMI_freq = SWPMI_clk / (((BitRate) + 1) * 4) | |
*/ | |
uint32_t TxBufferingMode; /*!< Specifies the transmission buffering mode. | |
This parameter can be a value of @ref SWPMI_Tx_Buffering_Mode */ | |
uint32_t RxBufferingMode; /*!< Specifies the reception buffering mode. | |
This parameter can be a value of @ref SWPMI_Rx_Buffering_Mode */ | |
}SWPMI_InitTypeDef; | |
/** | |
* @brief HAL SWPMI State structures definition | |
*/ | |
typedef enum | |
{ | |
HAL_SWPMI_STATE_RESET = 0x00, /*!< Peripheral Reset state */ | |
HAL_SWPMI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ | |
HAL_SWPMI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ | |
HAL_SWPMI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ | |
HAL_SWPMI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ | |
HAL_SWPMI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ | |
HAL_SWPMI_STATE_TIMEOUT = 0x03, /*!< Timeout state */ | |
HAL_SWPMI_STATE_ERROR = 0x04 /*!< Error */ | |
}HAL_SWPMI_StateTypeDef; | |
/** | |
* @brief SWPMI handle Structure definition | |
*/ | |
typedef struct | |
{ | |
SWPMI_TypeDef *Instance; /* SWPMI registers base address */ | |
SWPMI_InitTypeDef Init; /* SWMPI communication parameters */ | |
uint32_t *pTxBuffPtr; /* Pointer to SWPMI Tx transfer Buffer */ | |
uint32_t TxXferSize; /* SWPMI Tx Transfer size */ | |
uint32_t TxXferCount; /* SWPMI Tx Transfer Counter */ | |
uint32_t *pRxBuffPtr; /* Pointer to SWPMI Rx transfer Buffer */ | |
uint32_t RxXferSize; /* SWPMI Rx Transfer size */ | |
uint32_t RxXferCount; /* SWPMI Rx Transfer Counter */ | |
DMA_HandleTypeDef *hdmatx; /* SWPMI Tx DMA Handle parameters */ | |
DMA_HandleTypeDef *hdmarx; /* SWPMI Rx DMA Handle parameters */ | |
HAL_LockTypeDef Lock; /* SWPMI object */ | |
__IO HAL_SWPMI_StateTypeDef State; /* SWPMI communication state */ | |
__IO uint32_t ErrorCode; /* SWPMI Error code */ | |
}SWPMI_HandleTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup SWPMI_Exported_Constants SWPMI Exported Constants | |
* @{ | |
*/ | |
/** | |
* @defgroup SWPMI_Error_Code SWPMI Error Code Bitmap | |
* @{ | |
*/ | |
#define HAL_SWPMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ | |
#define HAL_SWPMI_ERROR_CRC ((uint32_t)0x00000004) /*!< frame error */ | |
#define HAL_SWPMI_ERROR_OVR ((uint32_t)0x00000008) /*!< Overrun error */ | |
#define HAL_SWPMI_ERROR_UDR ((uint32_t)0x0000000C) /*!< Underrun error */ | |
#define HAL_SWPMI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ | |
/** | |
* @} | |
*/ | |
/** @defgroup SWPMI_Voltage_Class SWPMI Voltage Class | |
* @{ | |
*/ | |
#define SWPMI_VOLTAGE_CLASS_C ((uint32_t)0x00000000) | |
#define SWPMI_VOLTAGE_CLASS_B SWPMI_OR_CLASS | |
/** | |
* @} | |
*/ | |
/** @defgroup SWPMI_Tx_Buffering_Mode SWPMI Tx Buffering Mode | |
* @{ | |
*/ | |
#define SWPMI_TX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000) | |
#define SWPMI_TX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000) | |
#define SWPMI_TX_MULTI_SOFTWAREBUFFER SWPMI_CR_TXMODE | |
/** | |
* @} | |
*/ | |
/** @defgroup SWPMI_Rx_Buffering_Mode SWPMI Rx Buffering Mode | |
* @{ | |
*/ | |
#define SWPMI_RX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000) | |
#define SWPMI_RX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000) | |
#define SWPMI_RX_MULTI_SOFTWAREBUFFER SWPMI_CR_RXMODE | |
/** | |
* @} | |
*/ | |
/** @defgroup SWPMI_Flags SWPMI Status Flags | |
* Elements values convention: 0xXXXXXXXX | |
* - 0xXXXXXXXX : Flag mask in the ISR register | |
* @{ | |
*/ | |
#define SWPMI_FLAG_RXBFF SWPMI_ISR_RXBFF | |
#define SWPMI_FLAG_TXBEF SWPMI_ISR_TXBEF | |
#define SWPMI_FLAG_RXBERF SWPMI_ISR_RXBERF | |
#define SWPMI_FLAG_RXOVRF SWPMI_ISR_RXOVRF | |
#define SWPMI_FLAG_TXUNRF SWPMI_ISR_TXUNRF | |
#define SWPMI_FLAG_RXNE SWPMI_ISR_RXNE | |
#define SWPMI_FLAG_TXE SWPMI_ISR_TXE | |
#define SWPMI_FLAG_TCF SWPMI_ISR_TCF | |
#define SWPMI_FLAG_SRF SWPMI_ISR_SRF | |
#define SWPMI_FLAG_SUSP SWPMI_ISR_SUSP | |
#define SWPMI_FLAG_DEACTF SWPMI_ISR_DEACTF | |
/** | |
* @} | |
*/ | |
/** @defgroup SWPMI_Interrupt_definition SWPMI Interrupts Definition | |
* Elements values convention: 0xXXXX | |
* - 0xXXXX : Flag mask in the IER register | |
* @{ | |
*/ | |
#define SWPMI_IT_SRIE SWPMI_IER_SRIE | |
#define SWPMI_IT_TCIE SWPMI_IER_TCIE | |
#define SWPMI_IT_TIE SWPMI_IER_TIE | |
#define SWPMI_IT_RIE SWPMI_IER_RIE | |
#define SWPMI_IT_TXUNRIE SWPMI_IER_TXUNRIE | |
#define SWPMI_IT_RXOVRIE SWPMI_IER_RXOVRIE | |
#define SWPMI_IT_RXBERIE SWPMI_IER_RXBERIE | |
#define SWPMI_IT_TXBEIE SWPMI_IER_TXBEIE | |
#define SWPMI_IT_RXBFIE SWPMI_IER_RXBFIE | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macros -----------------------------------------------------------*/ | |
/** @defgroup SWPMI_Exported_Macros SWPMI Exported Macros | |
* @{ | |
*/ | |
/** @brief Reset SWPMI handle state. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @retval None | |
*/ | |
#define __HAL_SWPMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SWPMI_STATE_RESET) | |
/** | |
* @brief Enable the SWPMI peripheral. | |
* @param __HANDLE__: SWPMI handle | |
* @retval None | |
*/ | |
#define __HAL_SWPMI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT) | |
/** | |
* @brief Disable the SWPMI peripheral. | |
* @param __HANDLE__: SWPMI handle | |
* @retval None | |
*/ | |
#define __HAL_SWPMI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT) | |
/** @brief Check whether the specified SWPMI flag is set or not. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
* @arg SWPMI_FLAG_RXBFF : Receive buffer full flag. | |
* @arg SWPMI_FLAG_TXBEF : Transmit buffer empty flag. | |
* @arg SWPMI_FLAG_RXBERF : Receive CRC error flag. | |
* @arg SWPMI_FLAG_RXOVRF : Receive overrun error flag. | |
* @arg SWPMI_FLAG_TXUNRF : Transmit underrun error flag. | |
* @arg SWPMI_FLAG_RXNE : Receive data register not empty. | |
* @arg SWPMI_FLAG_TXE : Transmit data register empty. | |
* @arg SWPMI_FLAG_TCF : Transfer complete flag. | |
* @arg SWPMI_FLAG_SRF : Slave resume flag. | |
* @arg SWPMI_FLAG_SUSP : SUSPEND flag. | |
* @arg SWPMI_FLAG_DEACTF : DEACTIVATED flag. | |
* @retval The new state of __FLAG__ (TRUE or FALSE). | |
*/ | |
#define __HAL_SWPMI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->ISR, (__FLAG__)) == (__FLAG__)) | |
/** @brief Clear the specified SWPMI ISR flag. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @param __FLAG__: specifies the flag to clear. | |
* This parameter can be one of the following values: | |
* @arg SWPMI_FLAG_RXBFF : Receive buffer full flag. | |
* @arg SWPMI_FLAG_TXBEF : Transmit buffer empty flag. | |
* @arg SWPMI_FLAG_RXBERF : Receive CRC error flag. | |
* @arg SWPMI_FLAG_RXOVRF : Receive overrun error flag. | |
* @arg SWPMI_FLAG_TXUNRF : Transmit underrun error flag. | |
* @arg SWPMI_FLAG_TCF : Transfer complete flag. | |
* @arg SWPMI_FLAG_SRF : Slave resume flag. | |
* @retval None | |
*/ | |
#define __HAL_SWPMI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->ICR, (__FLAG__)) | |
/** @brief Enable the specified SWPMI interrupt. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @param __INTERRUPT__: specifies the SWPMI interrupt source to enable. | |
* This parameter can be one of the following values: | |
* @arg SWPMI_IT_SRIE : Slave resume interrupt. | |
* @arg SWPMI_IT_TCIE : Transmit complete interrupt. | |
* @arg SWPMI_IT_TIE : Transmit interrupt. | |
* @arg SWPMI_IT_RIE : Receive interrupt. | |
* @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. | |
* @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. | |
* @arg SWPMI_IT_RXBEIE : Receive CRC error interrupt. | |
* @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. | |
* @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. | |
* @retval None | |
*/ | |
#define __HAL_SWPMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__)) | |
/** @brief Disable the specified SWPMI interrupt. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @param __INTERRUPT__: specifies the SWPMI interrupt source to disable. | |
* This parameter can be one of the following values: | |
* @arg SWPMI_IT_SRIE : Slave resume interrupt. | |
* @arg SWPMI_IT_TCIE : Transmit complete interrupt. | |
* @arg SWPMI_IT_TIE : Transmit interrupt. | |
* @arg SWPMI_IT_RIE : Receive interrupt. | |
* @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. | |
* @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. | |
* @arg SWPMI_IT_RXBEIE : Receive CRC error interrupt. | |
* @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. | |
* @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. | |
* @retval None | |
*/ | |
#define __HAL_SWPMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__)) | |
/** @brief Check whether the specified SWPMI interrupt has occurred or not. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @param __IT__: specifies the SWPMI interrupt to check. | |
* This parameter can be one of the following values: | |
* @arg SWPMI_IT_SRIE : Slave resume interrupt. | |
* @arg SWPMI_IT_TCIE : Transmit complete interrupt. | |
* @arg SWPMI_IT_TIE : Transmit interrupt. | |
* @arg SWPMI_IT_RIE : Receive interrupt. | |
* @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. | |
* @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. | |
* @arg SWPMI_IT_RXBERIE : Receive CRC error interrupt. | |
* @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. | |
* @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. | |
* @retval The new state of __IT__ (TRUE or FALSE). | |
*/ | |
#define __HAL_SWPMI_GET_IT(__HANDLE__, __IT__) (READ_BIT((__HANDLE__)->Instance->ISR,(__IT__)) == (__IT__)) | |
/** @brief Check whether the specified SWPMI interrupt source is enabled or not. | |
* @param __HANDLE__: specifies the SWPMI Handle. | |
* @param __IT__: specifies the SWPMI interrupt source to check. | |
* This parameter can be one of the following values: | |
* @arg SWPMI_IT_SRIE : Slave resume interrupt. | |
* @arg SWPMI_IT_TCIE : Transmit complete interrupt. | |
* @arg SWPMI_IT_TIE : Transmit interrupt. | |
* @arg SWPMI_IT_RIE : Receive interrupt. | |
* @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. | |
* @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. | |
* @arg SWPMI_IT_RXBERIE : Receive CRC error interrupt. | |
* @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. | |
* @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. | |
* @retval The new state of __IT__ (TRUE or FALSE). | |
*/ | |
#define __HAL_SWPMI_GET_IT_SOURCE(__HANDLE__, __IT__) ((READ_BIT((__HANDLE__)->Instance->IER, (__IT__)) == (__IT__)) ? SET : RESET) | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup SWPMI_Exported_Functions SWPMI Exported Functions | |
* @{ | |
*/ | |
/* Initialization/de-initialization functions ********************************/ | |
HAL_StatusTypeDef HAL_SWPMI_Init(SWPMI_HandleTypeDef *hswpmi); | |
HAL_StatusTypeDef HAL_SWPMI_DeInit(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_MspInit(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_MspDeInit(SWPMI_HandleTypeDef *hswpmi); | |
/* IO operation functions *****************************************************/ | |
HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_SWPMI_Receive(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SWPMI_Receive_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SWPMI_Receive_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); | |
HAL_StatusTypeDef HAL_SWPMI_DMAStop(SWPMI_HandleTypeDef *hswpmi); | |
HAL_StatusTypeDef HAL_SWPMI_EnableLoopback(SWPMI_HandleTypeDef *hswpmi); | |
HAL_StatusTypeDef HAL_SWPMI_DisableLoopback(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_IRQHandler(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_TxCpltCallback(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_TxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_RxCpltCallback(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_RxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi); | |
void HAL_SWPMI_ErrorCallback(SWPMI_HandleTypeDef *hswpmi); | |
/* Peripheral Control and State functions ************************************/ | |
HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(SWPMI_HandleTypeDef *hswpmi); | |
uint32_t HAL_SWPMI_GetError(SWPMI_HandleTypeDef *hswpmi); | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/** @defgroup SWPMI_Private_Types SWPMI Private Types | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/** @defgroup SWPMI_Private_Variables SWPMI Private Variables | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup SWPMI_Private_Constants SWPMI Private Constants | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup SWPMI_Private_Macros SWPMI Private Macros | |
* @{ | |
*/ | |
#define IS_SWPMI_VOLTAGE_CLASS(__CLASS__) (((__CLASS__) == SWPMI_VOLTAGE_CLASS_C) || \ | |
((__CLASS__) == SWPMI_VOLTAGE_CLASS_B)) | |
#define IS_SWPMI_BITRATE_VALUE(__VALUE__) (((__VALUE__) <= 63)) | |
#define IS_SWPMI_TX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_TX_NO_SOFTWAREBUFFER) || \ | |
((__MODE__) == SWPMI_TX_MULTI_SOFTWAREBUFFER)) | |
#define IS_SWPMI_RX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_RX_NO_SOFTWAREBUFFER) || \ | |
((__MODE__) == SWPMI_RX_MULTI_SOFTWAREBUFFER)) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx || */ | |
/* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ | |
/* STM32L496xx || STM32L4A6xx */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32L4xx_HAL_SWPMI_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |