blob: a619baf84c72fbc566e24ee04be50e72d89b2757 [file] [log] [blame]
/*
* Copyright (c) 2018 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
/** @file mqtt.h
*
* @defgroup mqtt_socket MQTT Client library
* @ingroup networking
* @{
* @brief MQTT Client Implementation
*
* @details
* MQTT Client's Application interface is defined in this header.
*
* @note The implementation assumes TCP module is enabled.
*
* @note By default the implementation uses MQTT version 3.1.1.
*/
#ifndef ZEPHYR_INCLUDE_NET_MQTT_H_
#define ZEPHYR_INCLUDE_NET_MQTT_H_
#include <stddef.h>
#include <zephyr.h>
#include <zephyr/types.h>
#include <net/tls_credentials.h>
#include <net/net_ip.h>
#include <sys/mutex.h>
#include <net/websocket.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief MQTT Asynchronous Events notified to the application from the module
* through the callback registered by the application.
*/
enum mqtt_evt_type {
/** Acknowledgment of connection request. Event result accompanying
* the event indicates whether the connection failed or succeeded.
*/
MQTT_EVT_CONNACK,
/** Disconnection Event. MQTT Client Reference is no longer valid once
* this event is received for the client.
*/
MQTT_EVT_DISCONNECT,
/** Publish event received when message is published on a topic client
* is subscribed to.
*
* @note PUBLISH event structure only contains payload size, the payload
* data parameter should be ignored. Payload content has to be
* read manually with @ref mqtt_read_publish_payload function.
*/
MQTT_EVT_PUBLISH,
/** Acknowledgment for published message with QoS 1. */
MQTT_EVT_PUBACK,
/** Reception confirmation for published message with QoS 2. */
MQTT_EVT_PUBREC,
/** Release of published message with QoS 2. */
MQTT_EVT_PUBREL,
/** Confirmation to a publish release message with QoS 2. */
MQTT_EVT_PUBCOMP,
/** Acknowledgment to a subscribe request. */
MQTT_EVT_SUBACK,
/** Acknowledgment to a unsubscribe request. */
MQTT_EVT_UNSUBACK
};
/** @brief MQTT version protocol level. */
enum mqtt_version {
MQTT_VERSION_3_1_0 = 3, /**< Protocol level for 3.1.0. */
MQTT_VERSION_3_1_1 = 4 /**< Protocol level for 3.1.1. */
};
/** @brief MQTT Quality of Service types. */
enum mqtt_qos {
/** Lowest Quality of Service, no acknowledgment needed for published
* message.
*/
MQTT_QOS_0_AT_MOST_ONCE = 0x00,
/** Medium Quality of Service, if acknowledgment expected for published
* message, duplicate messages permitted.
*/
MQTT_QOS_1_AT_LEAST_ONCE = 0x01,
/** Highest Quality of Service, acknowledgment expected and message
* shall be published only once. Message not published to interested
* parties unless client issues a PUBREL.
*/
MQTT_QOS_2_EXACTLY_ONCE = 0x02
};
/** @brief MQTT CONNACK return codes. */
enum mqtt_conn_return_code {
/** Connection accepted. */
MQTT_CONNECTION_ACCEPTED = 0x00,
/** The Server does not support the level of the MQTT protocol
* requested by the Client.
*/
MQTT_UNACCEPTABLE_PROTOCOL_VERSION = 0x01,
/** The Client identifier is correct UTF-8 but not allowed by the
* Server.
*/
MQTT_IDENTIFIER_REJECTED = 0x02,
/** The Network Connection has been made but the MQTT service is
* unavailable.
*/
MQTT_SERVER_UNAVAILABLE = 0x03,
/** The data in the user name or password is malformed. */
MQTT_BAD_USER_NAME_OR_PASSWORD = 0x04,
/** The Client is not authorized to connect. */
MQTT_NOT_AUTHORIZED = 0x05
};
/** @brief MQTT SUBACK return codes. */
enum mqtt_suback_return_code {
/** Subscription with QoS 0 succeeded. */
MQTT_SUBACK_SUCCESS_QoS_0 = 0x00,
/** Subscription with QoS 1 succeeded. */
MQTT_SUBACK_SUCCESS_QoS_1 = 0x01,
/** Subscription with QoS 2 succeeded. */
MQTT_SUBACK_SUCCESS_QoS_2 = 0x02,
/** Subscription for a topic failed. */
MQTT_SUBACK_FAILURE = 0x80
};
/** @brief Abstracts UTF-8 encoded strings. */
struct mqtt_utf8 {
u8_t *utf8; /**< Pointer to UTF-8 string. */
u32_t size; /**< Size of UTF string, in bytes. */
};
/** @brief Abstracts binary strings. */
struct mqtt_binstr {
u8_t *data; /**< Pointer to binary stream. */
u32_t len; /**< Length of binary stream. */
};
/** @brief Abstracts MQTT UTF-8 encoded topic that can be subscribed
* to or published.
*/
struct mqtt_topic {
/** Topic on to be published or subscribed to. */
struct mqtt_utf8 topic;
/** Quality of service requested for the subscription.
* @ref mqtt_qos for details.
*/
u8_t qos;
};
/** @brief Parameters for a publish message. */
struct mqtt_publish_message {
struct mqtt_topic topic; /**< Topic on which data was published. */
struct mqtt_binstr payload; /**< Payload on the topic published. */
};
/** @brief Parameters for a connection acknowledgment (CONNACK). */
struct mqtt_connack_param {
/** The Session Present flag enables a Client to establish whether
* the Client and Server have a consistent view about whether there
* is already stored Session state.
*/
u8_t session_present_flag;
/** The appropriate non-zero Connect return code indicates if the Server
* is unable to process a connection request for some reason.
*/
enum mqtt_conn_return_code return_code;
};
/** @brief Parameters for MQTT publish acknowledgment (PUBACK). */
struct mqtt_puback_param {
u16_t message_id;
};
/** @brief Parameters for MQTT publish receive (PUBREC). */
struct mqtt_pubrec_param {
u16_t message_id;
};
/** @brief Parameters for MQTT publish release (PUBREL). */
struct mqtt_pubrel_param {
u16_t message_id;
};
/** @brief Parameters for MQTT publish complete (PUBCOMP). */
struct mqtt_pubcomp_param {
u16_t message_id;
};
/** @brief Parameters for MQTT subscription acknowledgment (SUBACK). */
struct mqtt_suback_param {
u16_t message_id;
struct mqtt_binstr return_codes;
};
/** @brief Parameters for MQTT unsubscribe acknowledgment (UNSUBACK). */
struct mqtt_unsuback_param {
u16_t message_id;
};
/** @brief Parameters for a publish message. */
struct mqtt_publish_param {
/** Messages including topic, QoS and its payload (if any)
* to be published.
*/
struct mqtt_publish_message message;
/** Message id used for the publish message. Redundant for QoS 0. */
u16_t message_id;
/** Duplicate flag. If 1, it indicates the message is being
* retransmitted. Has no meaning with QoS 0.
*/
u8_t dup_flag : 1;
/** Retain flag. If 1, the message shall be stored persistently
* by the broker.
*/
u8_t retain_flag : 1;
};
/** @brief List of topics in a subscription request. */
struct mqtt_subscription_list {
/** Array containing topics along with QoS for each. */
struct mqtt_topic *list;
/** Number of topics in the subscription list */
u16_t list_count;
/** Message id used to identify subscription request. */
u16_t message_id;
};
/**
* @brief Defines event parameters notified along with asynchronous events
* to the application.
*/
union mqtt_evt_param {
/** Parameters accompanying MQTT_EVT_CONNACK event. */
struct mqtt_connack_param connack;
/** Parameters accompanying MQTT_EVT_PUBLISH event.
*
* @note PUBLISH event structure only contains payload size, the payload
* data parameter should be ignored. Payload content has to be
* read manually with @ref mqtt_read_publish_payload function.
*/
struct mqtt_publish_param publish;
/** Parameters accompanying MQTT_EVT_PUBACK event. */
struct mqtt_puback_param puback;
/** Parameters accompanying MQTT_EVT_PUBREC event. */
struct mqtt_pubrec_param pubrec;
/** Parameters accompanying MQTT_EVT_PUBREL event. */
struct mqtt_pubrel_param pubrel;
/** Parameters accompanying MQTT_EVT_PUBCOMP event. */
struct mqtt_pubcomp_param pubcomp;
/** Parameters accompanying MQTT_EVT_SUBACK event. */
struct mqtt_suback_param suback;
/** Parameters accompanying MQTT_EVT_UNSUBACK event. */
struct mqtt_unsuback_param unsuback;
};
/** @brief Defines MQTT asynchronous event notified to the application. */
struct mqtt_evt {
/** Identifies the event. */
enum mqtt_evt_type type;
/** Contains parameters (if any) accompanying the event. */
union mqtt_evt_param param;
/** Event result. 0 or a negative error code (errno.h) indicating
* reason of failure.
*/
int result;
};
struct mqtt_client;
/**
* @brief Asynchronous event notification callback registered by the
* application.
*
* @param[in] client Identifies the client for which the event is notified.
* @param[in] evt Event description along with result and associated
* parameters (if any).
*/
typedef void (*mqtt_evt_cb_t)(struct mqtt_client *client,
const struct mqtt_evt *evt);
/** @brief TLS configuration for secure MQTT transports. */
struct mqtt_sec_config {
/** Indicates the preference for peer verification. */
int peer_verify;
/** Indicates the number of entries in the cipher list. */
u32_t cipher_count;
/** Indicates the list of ciphers to be used for the session.
* May be NULL to use the default ciphers.
*/
int *cipher_list;
/** Indicates the number of entries in the sec tag list. */
u32_t sec_tag_count;
/** Indicates the list of security tags to be used for the session. */
sec_tag_t *sec_tag_list;
/** Peer hostname for ceritificate verification.
* May be NULL to skip hostname verification.
*/
char *hostname;
};
/** @brief MQTT transport type. */
enum mqtt_transport_type {
/** Use non secure TCP transport for MQTT connection. */
MQTT_TRANSPORT_NON_SECURE,
#if defined(CONFIG_MQTT_LIB_TLS)
/** Use secure TCP transport (TLS) for MQTT connection. */
MQTT_TRANSPORT_SECURE,
#endif /* CONFIG_MQTT_LIB_TLS */
#if defined(CONFIG_MQTT_LIB_WEBSOCKET)
/** Use non secure Websocket transport for MQTT connection. */
MQTT_TRANSPORT_NON_SECURE_WEBSOCKET,
#if defined(CONFIG_MQTT_LIB_TLS)
/** Use secure Websocket transport (TLS) for MQTT connection. */
MQTT_TRANSPORT_SECURE_WEBSOCKET,
#endif
#endif /* CONFIG_MQTT_LIB_WEBSOCKET */
/** Shall not be used as a transport type.
* Indicator of maximum transport types possible.
*/
MQTT_TRANSPORT_NUM
};
/** @brief MQTT transport specific data. */
struct mqtt_transport {
/** Transport type selection for client instance.
* @ref mqtt_transport_type for possible values. MQTT_TRANSPORT_MAX
* is not a valid type.
*/
enum mqtt_transport_type type;
union {
/* TCP socket transport for MQTT */
struct {
/** Socket descriptor. */
int sock;
} tcp;
#if defined(CONFIG_MQTT_LIB_TLS)
/* TLS socket transport for MQTT */
struct {
/** Socket descriptor. */
int sock;
/** TLS configuration. See @ref mqtt_sec_config for
* details.
*/
struct mqtt_sec_config config;
} tls;
#endif /* CONFIG_MQTT_LIB_TLS */
};
#if defined(CONFIG_MQTT_LIB_WEBSOCKET)
/** Websocket transport for MQTT */
struct {
/** Websocket configuration. */
struct websocket_request config;
/** Socket descriptor */
int sock;
/** Websocket timeout */
s32_t timeout;
} websocket;
#endif
#if defined(CONFIG_SOCKS)
struct {
struct sockaddr addr;
socklen_t addrlen;
} proxy;
#endif
};
/** @brief MQTT internal state. */
struct mqtt_internal {
/** Internal. Mutex to protect access to the client instance. */
struct sys_mutex mutex;
/** Internal. Wall clock value (in milliseconds) of the last activity
* that occurred. Needed for periodic PING.
*/
u32_t last_activity;
/** Internal. Client's state in the connection. */
u32_t state;
/** Internal. Packet length read so far. */
u32_t rx_buf_datalen;
/** Internal. Remaining payload length to read. */
u32_t remaining_payload;
};
/**
* @brief MQTT Client definition to maintain information relevant to the
* client.
*/
struct mqtt_client {
/** MQTT client internal state. */
struct mqtt_internal internal;
/** MQTT transport configuration and data. */
struct mqtt_transport transport;
/** Unique client identification to be used for the connection. */
struct mqtt_utf8 client_id;
/** Broker details, for example, address, port. Address type should
* be compatible with transport used.
*/
const void *broker;
/** User name (if any) to be used for the connection. NULL indicates
* no user name.
*/
struct mqtt_utf8 *user_name;
/** Password (if any) to be used for the connection. Note that if
* password is provided, user name shall also be provided. NULL
* indicates no password.
*/
struct mqtt_utf8 *password;
/** Will topic and QoS. Can be NULL. */
struct mqtt_topic *will_topic;
/** Will message. Can be NULL. Non NULL value valid only if will topic
* is not NULL.
*/
struct mqtt_utf8 *will_message;
/** Application callback registered with the module to get MQTT events.
*/
mqtt_evt_cb_t evt_cb;
/** Receive buffer used for MQTT packet reception in RX path. */
u8_t *rx_buf;
/** Size of receive buffer. */
u32_t rx_buf_size;
/** Transmit buffer used for creating MQTT packet in TX path. */
u8_t *tx_buf;
/** Size of transmit buffer. */
u32_t tx_buf_size;
/** Keepalive interval for this client in seconds.
* Default is CONFIG_MQTT_KEEPALIVE.
*/
u16_t keepalive;
/** MQTT protocol version. */
u8_t protocol_version;
/** Will retain flag, 1 if will message shall be retained persistently.
*/
u8_t will_retain : 1;
/** Clean session flag indicating a fresh (1) or a retained session (0).
* Default is 1.
*/
u8_t clean_session : 1;
};
/**
* @brief Initializes the client instance.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
*
* @note Shall be called to initialize client structure, before setting any
* client parameters and before connecting to broker.
*/
void mqtt_client_init(struct mqtt_client *client);
#if defined(CONFIG_SOCKS)
/*
* @brief Set proxy server details
*
* @param[in] client Client instance for which the procedure is requested,
* Shall not be NULL.
* @param[in] proxy_addr Proxy server address.
* @param[in] addrlen Proxy server address length.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*
* @note Must be called before calling mqtt_connect().
*/
int mqtt_client_set_proxy(struct mqtt_client *client,
struct sockaddr *proxy_addr,
socklen_t addrlen);
#endif
/**
* @brief API to request new MQTT client connection.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
*
* @note This memory is assumed to be resident until mqtt_disconnect is called.
* @note Any subsequent changes to parameters like broker address, user name,
* device id, etc. have no effect once MQTT connection is established.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*
* @note Default protocol revision used for connection request is 3.1.1. Please
* set client.protocol_version = MQTT_VERSION_3_1_0 to use protocol 3.1.0.
* @note
* @rst
* Please modify :option:`CONFIG_MQTT_KEEPALIVE` time to override
* default of 1 minute.
* @endrst
*/
int mqtt_connect(struct mqtt_client *client);
/**
* @brief API to publish messages on topics.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
* @param[in] param Parameters to be used for the publish message.
* Shall not be NULL.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_publish(struct mqtt_client *client,
const struct mqtt_publish_param *param);
/**
* @brief API used by client to send acknowledgment on receiving QoS1 publish
* message. Should be called on reception of @ref MQTT_EVT_PUBLISH with
* QoS level @ref MQTT_QOS_1_AT_LEAST_ONCE.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
* @param[in] param Identifies message being acknowledged.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_publish_qos1_ack(struct mqtt_client *client,
const struct mqtt_puback_param *param);
/**
* @brief API used by client to send acknowledgment on receiving QoS2 publish
* message. Should be called on reception of @ref MQTT_EVT_PUBLISH with
* QoS level @ref MQTT_QOS_2_EXACTLY_ONCE.
*
* @param[in] client Identifies client instance for which the procedure is
* requested. Shall not be NULL.
* @param[in] param Identifies message being acknowledged.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_publish_qos2_receive(struct mqtt_client *client,
const struct mqtt_pubrec_param *param);
/**
* @brief API used by client to request release of QoS2 publish message.
* Should be called on reception of @ref MQTT_EVT_PUBREC.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
* @param[in] param Identifies message being released.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_publish_qos2_release(struct mqtt_client *client,
const struct mqtt_pubrel_param *param);
/**
* @brief API used by client to send acknowledgment on receiving QoS2 publish
* release message. Should be called on reception of
* @ref MQTT_EVT_PUBREL.
*
* @param[in] client Identifies client instance for which the procedure is
* requested. Shall not be NULL.
* @param[in] param Identifies message being completed.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_publish_qos2_complete(struct mqtt_client *client,
const struct mqtt_pubcomp_param *param);
/**
* @brief API to request subscription of one or more topics on the connection.
*
* @param[in] client Identifies client instance for which the procedure
* is requested. Shall not be NULL.
* @param[in] param Subscription parameters. Shall not be NULL.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_subscribe(struct mqtt_client *client,
const struct mqtt_subscription_list *param);
/**
* @brief API to request unsubscription of one or more topics on the connection.
*
* @param[in] client Identifies client instance for which the procedure is
* requested. Shall not be NULL.
* @param[in] param Parameters describing topics being unsubscribed from.
* Shall not be NULL.
*
* @note QoS included in topic description is unused in this API.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_unsubscribe(struct mqtt_client *client,
const struct mqtt_subscription_list *param);
/**
* @brief API to send MQTT ping. The use of this API is optional, as the library
* handles the connection keep-alive on it's own, see @ref mqtt_live.
*
* @param[in] client Identifies client instance for which procedure is
* requested.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_ping(struct mqtt_client *client);
/**
* @brief API to disconnect MQTT connection.
*
* @param[in] client Identifies client instance for which procedure is
* requested.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_disconnect(struct mqtt_client *client);
/**
* @brief API to abort MQTT connection. This will close the corresponding
* transport without closing the connection gracefully at the MQTT level
* (with disconnect message).
*
* @param[in] client Identifies client instance for which procedure is
* requested.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_abort(struct mqtt_client *client);
/**
* @brief This API should be called periodically for the client to be able
* to keep the connection alive by sending Ping Requests if need be.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
*
* @note Application shall ensure that the periodicity of calling this function
* makes it possible to respect the Keep Alive time agreed with the
* broker on connection. @ref mqtt_connect for details on Keep Alive
* time.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_live(struct mqtt_client *client);
/**
* @brief Receive an incoming MQTT packet. The registered callback will be
* called with the packet content.
*
* @note In case of PUBLISH message, the payload has to be read separately with
* @ref mqtt_read_publish_payload function. The size of the payload to
* read is provided in the publish event structure.
*
* @note This is a non-blocking call.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
*
* @return 0 or a negative error code (errno.h) indicating reason of failure.
*/
int mqtt_input(struct mqtt_client *client);
/**
* @brief Read the payload of the received PUBLISH message. This function should
* be called within the MQTT event handler, when MQTT PUBLISH message is
* notified.
*
* @note This is a non-blocking call.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
* @param[out] buffer Buffer where payload should be stored.
* @param[in] length Length of the buffer, in bytes.
*
* @return Number of bytes read or a negative error code (errno.h) indicating
* reason of failure.
*/
int mqtt_read_publish_payload(struct mqtt_client *client, void *buffer,
size_t length);
/**
* @brief Blocking version of @ref mqtt_read_publish_payload function.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
* @param[out] buffer Buffer where payload should be stored.
* @param[in] length Length of the buffer, in bytes.
*
* @return Number of bytes read or a negative error code (errno.h) indicating
* reason of failure.
*/
int mqtt_read_publish_payload_blocking(struct mqtt_client *client, void *buffer,
size_t length);
/**
* @brief Blocking version of @ref mqtt_read_publish_payload function which
* runs until the required number of bytes are read.
*
* @param[in] client Client instance for which the procedure is requested.
* Shall not be NULL.
* @param[out] buffer Buffer where payload should be stored.
* @param[in] length Number of bytes to read.
*
* @return 0 if success, otherwise a negative error code (errno.h) indicating
* reason of failure.
*/
int mqtt_readall_publish_payload(struct mqtt_client *client, u8_t *buffer,
size_t length);
#ifdef __cplusplus
}
#endif
#endif /* ZEPHYR_INCLUDE_NET_MQTT_H_ */
/**@} */