| # SPI driver configuration options |
| |
| # Copyright (c) 2015-2016 Intel Corporation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # |
| # SPI Drivers |
| # |
| menuconfig SPI |
| bool "SPI hardware bus support" |
| help |
| Enable support for the SPI hardware bus. |
| |
| if SPI |
| |
| config SPI_ASYNC |
| bool "Enable Asynchronous call support" |
| select POLL |
| help |
| This option enables the asynchronous API calls. |
| |
| config SPI_SLAVE |
| bool "Enable Slave support [EXPERIMENTAL]" |
| help |
| Enables Driver SPI slave operations. Slave support depends |
| on the driver and the hardware it runs on. |
| |
| config SPI_INIT_PRIORITY |
| int "Init priority" |
| default 70 |
| help |
| Device driver initialization priority. |
| |
| module = SPI |
| module-str = spi |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| |
| config SPI_0 |
| bool "SPI port 0" |
| help |
| Enable SPI controller port 0. |
| |
| config SPI_0_OP_MODES |
| int "Port 0 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_0 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 0, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_1 |
| bool "SPI port 1" |
| help |
| Enable SPI controller port 1. |
| |
| config SPI_1_OP_MODES |
| int "Port 1 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_1 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 1, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_2 |
| bool "SPI port 2" |
| help |
| Enable SPI controller port 2. |
| |
| config SPI_2_OP_MODES |
| int "Port 2 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_2 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 2, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_3 |
| bool "SPI port 3" |
| help |
| Enable SPI controller port 3. |
| |
| config SPI_3_OP_MODES |
| int "Port 3 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_3 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 3, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_4 |
| bool "SPI port 4" |
| help |
| Enable SPI controller port 4. |
| |
| config SPI_4_OP_MODES |
| int "Port 4 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_4 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 4, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_5 |
| bool "SPI port 5" |
| help |
| Enable SPI controller port 5. |
| |
| config SPI_5_OP_MODES |
| int "Port 5 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_5 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 5, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_6 |
| bool "SPI port 6" |
| help |
| Enable SPI controller port 6. |
| |
| config SPI_6_OP_MODES |
| int "Port 6 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_6 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 6, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_7 |
| bool "SPI port 7" |
| help |
| Enable SPI controller port 7. |
| |
| config SPI_7_OP_MODES |
| int "Port 7 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_7 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 7, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| config SPI_8 |
| bool "SPI port 8" |
| help |
| Enable SPI controller port 8. |
| |
| config SPI_8_OP_MODES |
| int "Port 8 supported operation modes (master/slave/both)" |
| default 1 |
| range 1 3 |
| depends on SPI_8 |
| help |
| This sets the supported operation modes at runtime, by the SPI |
| port 8, where: |
| 1 is MASTER mode only (default) |
| 2 is SLAVE mode only |
| 3 is both modes are available. |
| |
| source "drivers/spi/Kconfig.stm32" |
| |
| source "drivers/spi/Kconfig.dw" |
| |
| source "drivers/spi/Kconfig.mcux_dspi" |
| |
| source "drivers/spi/Kconfig.mcux_flexcomm" |
| |
| source "drivers/spi/Kconfig.mcux_lpspi" |
| |
| source "drivers/spi/Kconfig.rv32m1_lpspi" |
| |
| source "drivers/spi/Kconfig.sam" |
| |
| source "drivers/spi/Kconfig.sam0" |
| |
| source "drivers/spi/Kconfig.sifive" |
| |
| source "drivers/spi/Kconfig.nrfx" |
| |
| source "drivers/spi/Kconfig.cc13xx_cc26xx" |
| |
| source "drivers/spi/Kconfig.litex" |
| |
| source "drivers/spi/Kconfig.oc_simple" |
| |
| source "drivers/spi/Kconfig.xec_qmspi" |
| |
| source "drivers/spi/Kconfig.gecko" |
| |
| endif # SPI |