| # mcumgr configuration options |
| |
| # Copyright Runtime.io 2018. All rights reserved. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menu "Management" |
| |
| config MCUMGR_SMP_BT |
| bool "Bluetooth mcumgr SMP transport" |
| select MCUMGR |
| select BT |
| select BT_PERIPHERAL |
| select BT_GATT_DYNAMIC_DB |
| help |
| Enables handling of SMP commands received over Bluetooth. |
| |
| config MCUMGR_SMP_BT_AUTHEN |
| bool "Authenticated requirement for Bluetooth mcumgr SMP transport" |
| depends on MCUMGR_SMP_BT |
| select BT_SMP |
| default y |
| help |
| Enables encrypted and authenticated connection requirement to |
| Bluetooth SMP transport. |
| |
| config MCUMGR_SMP_SHELL |
| bool "Shell mcumgr SMP transport" |
| select MCUMGR |
| select SHELL |
| select SHELL_BACKEND_SERIAL |
| select BASE64 |
| help |
| Enables handling of SMP commands received over shell. This allows |
| the shell to be use for both mcumgr commands and shell commands. |
| |
| config MCUMGR_SMP_SHELL_MTU |
| int "Shell SMP MTU" |
| default 256 |
| depends on MCUMGR_SMP_SHELL |
| help |
| Maximum size of SMP frames sent and received over shell. This value |
| must satisfy the following relation: |
| MCUMGR_SMP_SHELL_MTU <= MCUMGR_BUF_SIZE + 2 |
| |
| config MCUMGR_SMP_UART |
| bool "UART mcumgr SMP transport" |
| select MCUMGR |
| select UART_MCUMGR |
| select BASE64 |
| help |
| Enables handling of SMP commands received over UART. This is a |
| lightweight alternative to MCUMGR_SMP_SHELL. It allows mcumgr |
| commands to be received over UART without requiring an additional |
| thread. |
| |
| config MCUMGR_SMP_UART_MTU |
| int "UART SMP MTU" |
| default 256 |
| depends on MCUMGR_SMP_UART |
| help |
| Maximum size of SMP frames sent and received over UART, in bytes. |
| This value must satisfy the following relation: |
| MCUMGR_SMP_UART_MTU <= MCUMGR_BUF_SIZE + 2 |
| |
| source "subsys/mgmt/Kconfig.mcumgr" |
| |
| config MCUMGR_SMP_UDP |
| bool "UDP mcumgr SMP transport" |
| select MCUMGR |
| select NETWORKING |
| select NET_UDP |
| select NET_SOCKETS |
| select NET_SOCKETS_POSIX_NAMES |
| help |
| Enables handling of SMP commands received over UDP. |
| Will start a thread for listening on the configured UDP port. |
| |
| config MCUMGR_SMP_UDP_IPV4 |
| bool "UDP SMP using IPv4" |
| depends on MCUMGR_SMP_UDP |
| depends on NET_IPV4 |
| default y |
| help |
| Enable SMP UDP using IPv4 addressing. |
| Can be enabled alongside IPv6 addressing. |
| |
| config MCUMGR_SMP_UDP_IPV6 |
| bool "UDP SMP using IPv6" |
| depends on MCUMGR_SMP_UDP |
| depends on NET_IPV6 |
| help |
| Enable SMP UDP using IPv6 addressing. |
| Can be enabled alongside IPv4 addressing. |
| |
| config MCUMGR_SMP_UDP_PORT |
| int "UDP SMP port" |
| depends on MCUMGR_SMP_UDP |
| default 1337 |
| help |
| UDP port that SMP server will listen for SMP commands on. |
| |
| config MCUMGR_SMP_UDP_STACK_SIZE |
| int "UDP SMP stack size" |
| depends on MCUMGR_SMP_UDP |
| default 512 |
| help |
| Stack size of the SMP UDP listening thread |
| |
| config MCUMGR_SMP_UDP_THREAD_PRIO |
| int "UDP SMP thread priority" |
| depends on MCUMGR_SMP_UDP |
| default 0 |
| help |
| Scheduling priority of the SMP UDP listening thread. |
| |
| config MCUMGR_SMP_UDP_MTU |
| int "UDP SMP MTU" |
| depends on MCUMGR_SMP_UDP |
| default 1500 |
| help |
| Maximum size of SMP frames sent and received over UDP, in bytes. |
| This value must satisfy the following relation: |
| MCUMGR_SMP_UDP_MTU <= MCUMGR_BUF_SIZE + SMP msg overhead - address size |
| where address size is determined by IPv4/IPv6 selection. |
| |
| if MCUMGR |
| config MCUMGR_BUF_COUNT |
| int "Number of mcumgr buffers" |
| default 2 if MCUMGR_SMP_UDP |
| default 4 |
| help |
| The number of net_bufs to allocate for mcumgr. These buffers are |
| used for both requests and responses. |
| |
| config MCUMGR_BUF_SIZE |
| int "Size of each mcumgr buffer" |
| default 2048 if MCUMGR_SMP_UDP |
| default 384 |
| help |
| The size, in bytes, of each mcumgr buffer. This value must satisfy |
| the following relation: |
| MCUMGR_BUF_SIZE >= transport-specific-MTU + transport-overhead |
| |
| config MCUMGR_BUF_USER_DATA_SIZE |
| int "Size of mcumgr buffer user data" |
| default 24 if MCUMGR_SMP_UDP && MCUMGR_SMP_UDP_IPV6 |
| default 8 if MCUMGR_SMP_UDP && MCUMGR_SMP_UDP_IPV4 |
| default 4 |
| help |
| The size, in bytes, of user data to allocate for each mcumgr buffer. |
| |
| Different mcumgr transports impose different requirements for this |
| setting. A value of 4 is sufficient for UART, shell, and bluetooth. |
| For UDP, the userdata must be large enough to hold a IPv4/IPv6 address. |
| |
| Note that CONFIG_NET_BUF_USER_DATA_SIZE must be at least as big as |
| MCUMGR_BUF_USER_DATA_SIZE. |
| |
| endif # MCUMGR |
| endmenu |