| /* |
| * Copyright (c) 2019-2020 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf5340_cpunet_qkaa_eng_a.dtsi> |
| |
| / { |
| model = "Nordic NRF5340 PDK NRF5340 Network"; |
| compatible = "nordic,nrf5340-pdk-nrf5340-cpunet"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| zephyr,bt-mon-uart = &uart0; |
| zephyr,bt-c2h-uart = &uart0; |
| zephyr,sram = &sram1; |
| zephyr,flash = &flash1; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0: led_0 { |
| gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; |
| label = "Green LED 0"; |
| }; |
| led1: led_1 { |
| gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
| label = "Green LED 1"; |
| }; |
| led2: led_2 { |
| gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; |
| label = "Green LED 2"; |
| }; |
| led3: led_3 { |
| gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; |
| label = "Green LED 3"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 1"; |
| }; |
| button1: button_1 { |
| gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 2"; |
| }; |
| button2: button_2 { |
| gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 3"; |
| }; |
| button3: button_3 { |
| gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 4"; |
| }; |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| led0 = &led0; |
| led1 = &led1; |
| led2 = &led2; |
| led3 = &led3; |
| sw0 = &button0; |
| sw1 = &button1; |
| sw2 = &button2; |
| sw3 = &button3; |
| }; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| current-speed = <115200>; |
| tx-pin = <25>; |
| rx-pin = <26>; |
| rts-pin = <10>; |
| cts-pin = <12>; |
| }; |
| |
| &timer0 { |
| status = "okay"; |
| }; |
| |
| &timer1 { |
| status = "okay"; |
| }; |
| |
| &timer2 { |
| status = "okay"; |
| }; |
| |
| &flash1 { |
| /* |
| * For more information, see: |
| * https://docs.zephyrproject.org/latest/guides/dts/legacy-macros.html#legacy-flash-partitions |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0xc000>; |
| }; |
| slot0_partition: partition@c000 { |
| label = "image-0"; |
| reg = <0x0000C000 0x12000>; |
| }; |
| slot1_partition: partition@1e000 { |
| label = "image-1"; |
| reg = <0x0001E000 0x12000>; |
| }; |
| scratch_partition: partition@30000 { |
| label = "image-scratch"; |
| reg = <0x00030000 0xa000>; |
| }; |
| storage_partition: partition@3a000 { |
| label = "storage"; |
| reg = <0x0003a000 0x6000>; |
| }; |
| }; |
| }; |
| |
| /* Include shared RAM configuration file */ |
| #include "nrf5340_shared_sram_planning_conf.dts" |