blob: efcfdd029daa7074df2c79af46fd481fc5dcef1b [file] [log] [blame]
/* ST Microelectronics LIS2MDL 3-axis magnetometer sensor
*
* Copyright (c) 2018-2019 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*
* Datasheet:
* https://www.st.com/resource/en/datasheet/lis2mdl.pdf
*/
#ifndef __MAG_LIS2MDL_H
#define __MAG_LIS2MDL_H
#include <drivers/spi.h>
#include <drivers/gpio.h>
#include <drivers/sensor.h>
#include <sys/util.h>
#include "lis2mdl_reg.h"
union axis3bit16_t {
int16_t i16bit[3];
uint8_t u8bit[6];
};
union axis1bit16_t {
int16_t i16bit;
uint8_t u8bit[2];
};
struct lis2mdl_config {
char *master_dev_name;
int (*bus_init)(const struct device *dev);
#ifdef CONFIG_LIS2MDL_TRIGGER
char *gpio_name;
uint32_t gpio_pin;
uint8_t gpio_flags;
#endif /* CONFIG_LIS2MDL_TRIGGER */
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
uint16_t i2c_slv_addr;
#elif DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
struct spi_config spi_conf;
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
const char *gpio_cs_port;
uint8_t cs_gpio;
uint8_t cs_gpio_flags;
#endif /* DT_INST_SPI_DEV_HAS_CS_GPIOS(0) */
#endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) */
};
/* Sensor data */
struct lis2mdl_data {
const struct device *dev;
const struct device *bus;
uint16_t i2c_addr;
int16_t mag[3];
int32_t temp_sample;
stmdev_ctx_t *ctx;
#ifdef CONFIG_PM_DEVICE
uint32_t power_state;
#endif
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
stmdev_ctx_t ctx_i2c;
#elif DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
stmdev_ctx_t ctx_spi;
#endif
#ifdef CONFIG_LIS2MDL_TRIGGER
const struct device *gpio;
struct gpio_callback gpio_cb;
sensor_trigger_handler_t handler_drdy;
#if defined(CONFIG_LIS2MDL_TRIGGER_OWN_THREAD)
K_KERNEL_STACK_MEMBER(thread_stack, CONFIG_LIS2MDL_THREAD_STACK_SIZE);
struct k_thread thread;
struct k_sem gpio_sem;
#elif defined(CONFIG_LIS2MDL_TRIGGER_GLOBAL_THREAD)
struct k_work work;
#endif /* CONFIG_LIS2MDL_TRIGGER_GLOBAL_THREAD */
#endif /* CONFIG_LIS2MDL_TRIGGER */
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
struct spi_cs_control cs_ctrl;
#endif /* DT_INST_SPI_DEV_HAS_CS_GPIOS(0) */
};
int lis2mdl_spi_init(const struct device *dev);
int lis2mdl_i2c_init(const struct device *dev);
#ifdef CONFIG_LIS2MDL_TRIGGER
int lis2mdl_init_interrupt(const struct device *dev);
int lis2mdl_trigger_set(const struct device *dev,
const struct sensor_trigger *trig,
sensor_trigger_handler_t handler);
#endif /* CONFIG_LIS2MDL_TRIGGER */
#endif /* __MAG_LIS2MDL_H */