blob: b7e8e76bc4819df8bdafbdf9766e86274320a508 [file] [log] [blame]
/*
* Copyright (c) 2017 Linaro Limited
* Copyright (c) 2017 BayLibre, SAS
* Copyright (c) 2019 Centaur Analytics, Inc
*
* SPDX-License-Identifier: Apache-2.0
*/
#define LOG_DOMAIN flash_stm32l4
#define LOG_LEVEL CONFIG_FLASH_LOG_LEVEL
#include <logging/log.h>
LOG_MODULE_REGISTER(LOG_DOMAIN);
#include <kernel.h>
#include <device.h>
#include <string.h>
#include <drivers/flash.h>
#include <init.h>
#include <soc.h>
#include "flash_stm32.h"
#if !defined (STM32L4R5xx) && !defined (STM32L4R7xx) && !defined (STM32L4R9xx) && !defined (STM32L4S5xx) && !defined (STM32L4S7xx) && !defined (STM32L4S9xx)
#define STM32L4X_PAGE_SHIFT 11
#else
#define STM32L4X_PAGE_SHIFT 12
#endif
/* offset and len must be aligned on 8 for write
* , positive and not beyond end of flash */
bool flash_stm32_valid_range(const struct device *dev, off_t offset,
uint32_t len,
bool write)
{
return (!write || (offset % 8 == 0 && len % 8 == 0U)) &&
flash_stm32_range_exists(dev, offset, len);
}
/*
* STM32L4xx devices can have up to 512 2K pages on two 256x2K pages banks
*
* STM32L4R/Sxx devices can have up to 512 4K pages on two 256x4K pages banks
*/
static unsigned int get_page(off_t offset)
{
return offset >> STM32L4X_PAGE_SHIFT;
}
static int write_dword(const struct device *dev, off_t offset, uint64_t val)
{
volatile uint32_t *flash = (uint32_t *)(offset + CONFIG_FLASH_BASE_ADDRESS);
FLASH_TypeDef *regs = FLASH_STM32_REGS(dev);
#if defined(FLASH_OPTR_DUALBANK) || defined(FLASH_OPTR_DBANK)
bool dcache_enabled = false;
#endif /* FLASH_OPTR_DUALBANK || FLASH_OPTR_DBANK */
uint32_t tmp;
int rc;
/* if the control register is locked, do not fail silently */
if (regs->CR & FLASH_CR_LOCK) {
return -EIO;
}
/* Check that no Flash main memory operation is ongoing */
rc = flash_stm32_wait_flash_idle(dev);
if (rc < 0) {
return rc;
}
/* Check if this double word is erased */
if (flash[0] != 0xFFFFFFFFUL ||
flash[1] != 0xFFFFFFFFUL) {
return -EIO;
}
#if defined(FLASH_OPTR_DUALBANK) || defined(FLASH_OPTR_DBANK)
/*
* Disable the data cache to avoid the silicon errata 2.2.3:
* "Data cache might be corrupted during Flash memory read-while-write operation"
*/
if (regs->ACR & FLASH_ACR_DCEN) {
dcache_enabled = true;
regs->ACR &= (~FLASH_ACR_DCEN);
}
#endif /* FLASH_OPTR_DUALBANK || FLASH_OPTR_DBANK */
/* Set the PG bit */
regs->CR |= FLASH_CR_PG;
/* Flush the register write */
tmp = regs->CR;
/* Perform the data write operation at the desired memory address */
flash[0] = (uint32_t)val;
flash[1] = (uint32_t)(val >> 32);
/* Wait until the BSY bit is cleared */
rc = flash_stm32_wait_flash_idle(dev);
/* Clear the PG bit */
regs->CR &= (~FLASH_CR_PG);
#if defined(FLASH_OPTR_DUALBANK) || defined(FLASH_OPTR_DBANK)
/* Reset/enable the data cache if previously enabled */
if (dcache_enabled) {
regs->ACR |= FLASH_ACR_DCRST;
regs->ACR &= (~FLASH_ACR_DCRST);
regs->ACR |= FLASH_ACR_DCEN;
}
#endif /* FLASH_OPTR_DUALBANK || FLASH_OPTR_DBANK */
return rc;
}
#define SOC_NV_FLASH_SIZE DT_REG_SIZE(DT_INST(0, soc_nv_flash))
static int erase_page(const struct device *dev, unsigned int page)
{
FLASH_TypeDef *regs = FLASH_STM32_REGS(dev);
uint32_t tmp;
uint16_t pages_per_bank;
int rc;
#if !defined(FLASH_OPTR_DUALBANK) && !defined(FLASH_OPTR_DBANK)
/* Single bank device. Each page is of 2KB size */
pages_per_bank = SOC_NV_FLASH_SIZE >> 11;
#elif defined(FLASH_OPTR_DUALBANK)
/* L4 series (2K page size) with configurable Dual Bank (default y) */
/* Dual Bank is only option for 1M devices */
if ((regs->OPTR & FLASH_OPTR_DUALBANK) ||
(SOC_NV_FLASH_SIZE == (1024*1024))) {
/* Dual Bank configuration (nbr pages = flash size / 2 / 2K) */
pages_per_bank = SOC_NV_FLASH_SIZE >> 12;
} else {
/* Single bank configuration. This has not been validated. */
/* Not supported for now. */
return -ENOTSUP;
}
#elif defined(FLASH_OPTR_DBANK)
/* L4+ series (4K page size) with configurable Dual Bank (default y)*/
if (regs->OPTR & FLASH_OPTR_DBANK) {
/* Dual Bank configuration (nbre pags = flash size / 2 / 4K) */
pages_per_bank = SOC_NV_FLASH_SIZE >> 13;
} else {
/* Single bank configuration */
/* Requires 128 bytes data read. This config is not supported */
return -ENOTSUP;
}
#endif
/* if the control register is locked, do not fail silently */
if (regs->CR & FLASH_CR_LOCK) {
return -EIO;
}
/* Check that no Flash memory operation is ongoing */
rc = flash_stm32_wait_flash_idle(dev);
if (rc < 0) {
return rc;
}
/* Set the PER bit and select the page you wish to erase */
regs->CR |= FLASH_CR_PER;
#ifdef FLASH_CR_BKER
regs->CR &= ~FLASH_CR_BKER_Msk;
/* Select bank, only for DUALBANK devices */
if (page >= pages_per_bank)
regs->CR |= FLASH_CR_BKER;
#endif
regs->CR &= ~FLASH_CR_PNB_Msk;
regs->CR |= ((page % pages_per_bank) << 3);
/* Set the STRT bit */
regs->CR |= FLASH_CR_STRT;
/* flush the register write */
tmp = regs->CR;
/* Wait for the BSY bit */
rc = flash_stm32_wait_flash_idle(dev);
regs->CR &= ~FLASH_CR_PER;
return rc;
}
int flash_stm32_block_erase_loop(const struct device *dev,
unsigned int offset,
unsigned int len)
{
int i, rc = 0;
i = get_page(offset);
for (; i <= get_page(offset + len - 1) ; ++i) {
rc = erase_page(dev, i);
if (rc < 0) {
break;
}
}
return rc;
}
int flash_stm32_write_range(const struct device *dev, unsigned int offset,
const void *data, unsigned int len)
{
int i, rc = 0;
for (i = 0; i < len; i += 8, offset += 8U) {
rc = write_dword(dev, offset,
UNALIGNED_GET((const uint64_t *) data + (i >> 3)));
if (rc < 0) {
return rc;
}
}
return rc;
}
void flash_stm32_page_layout(const struct device *dev,
const struct flash_pages_layout **layout,
size_t *layout_size)
{
static struct flash_pages_layout stm32l4_flash_layout = {
.pages_count = 0,
.pages_size = 0,
};
ARG_UNUSED(dev);
if (stm32l4_flash_layout.pages_count == 0) {
stm32l4_flash_layout.pages_count = FLASH_SIZE / FLASH_PAGE_SIZE;
stm32l4_flash_layout.pages_size = FLASH_PAGE_SIZE;
}
*layout = &stm32l4_flash_layout;
*layout_size = 1;
}