blob: 87b50f848fc2cb7d2085049220da637620878ac1 [file] [log] [blame]
/* ieee802154_cc1200.c - TI CC1200 driver */
#define DT_DRV_COMPAT ti_cc1200
/*
* Copyright (c) 2017 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define LOG_MODULE_NAME ieee802154_cc1200
#define LOG_LEVEL CONFIG_IEEE802154_DRIVER_LOG_LEVEL
#include <logging/log.h>
LOG_MODULE_REGISTER(LOG_MODULE_NAME);
#include <errno.h>
#include <kernel.h>
#include <arch/cpu.h>
#include <debug/stack.h>
#include <device.h>
#include <init.h>
#include <net/net_if.h>
#include <net/net_pkt.h>
#include <sys/byteorder.h>
#include <string.h>
#include <random/rand32.h>
#include <drivers/spi.h>
#include <drivers/gpio.h>
#include <net/ieee802154_radio.h>
#include "ieee802154_cc1200.h"
#include "ieee802154_cc1200_rf.h"
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
static struct spi_cs_control cs_ctrl;
#endif
/* ToDo: supporting 802.15.4g will require GPIO2
* used as CC1200_GPIO_SIG_RXFIFO_THR
*
* Note: GPIO3 is unused.
*/
#define CC1200_IOCFG3 CC1200_GPIO_SIG_MARC_2PIN_STATUS_0
#define CC1200_IOCFG2 CC1200_GPIO_SIG_MARC_2PIN_STATUS_1
#define CC1200_IOCFG0 CC1200_GPIO_SIG_PKT_SYNC_RXTX
/***********************
* Debugging functions *
**********************/
static void cc1200_print_status(uint8_t status)
{
if (status == CC1200_STATUS_IDLE) {
LOG_DBG("Idling");
} else if (status == CC1200_STATUS_RX) {
LOG_DBG("Receiving");
} else if (status == CC1200_STATUS_TX) {
LOG_DBG("Transmitting");
} else if (status == CC1200_STATUS_FSTXON) {
LOG_DBG("FS TX on");
} else if (status == CC1200_STATUS_CALIBRATE) {
LOG_DBG("Calibrating");
} else if (status == CC1200_STATUS_SETTLING) {
LOG_DBG("Settling");
} else if (status == CC1200_STATUS_RX_FIFO_ERROR) {
LOG_DBG("RX FIFO error!");
} else if (status == CC1200_STATUS_TX_FIFO_ERROR) {
LOG_DBG("TX FIFO error!");
}
}
/*********************
* Generic functions *
********************/
bool z_cc1200_access_reg(struct cc1200_context *ctx, bool read, uint8_t addr,
void *data, size_t length, bool extended, bool burst)
{
uint8_t cmd_buf[2];
const struct spi_buf buf[2] = {
{
.buf = cmd_buf,
.len = extended ? 2 : 1,
},
{
.buf = data,
.len = length,
}
};
struct spi_buf_set tx = { .buffers = buf };
/*
LOG_DBG("%s: addr 0x%02x - Data %p Length %u - %s, %s",
read ? "Read" : "Write", addr, data, length,
extended ? "extended" : "normal",
burst ? "burst" : "single");
*/
cmd_buf[0] = 0U;
if (burst) {
cmd_buf[0] |= CC1200_ACCESS_BURST;
}
if (extended) {
cmd_buf[0] |= CC1200_REG_EXTENDED_ADDRESS;
cmd_buf[1] = addr;
} else {
cmd_buf[0] |= addr;
}
if (read) {
const struct spi_buf_set rx = {
.buffers = buf,
.count = 2
};
cmd_buf[0] |= CC1200_ACCESS_RD;
tx.count = 1;
return (spi_transceive(ctx->spi, &ctx->spi_cfg, &tx, &rx) == 0);
}
/* CC1200_ACCESS_WR is 0 so no need to play with it */
tx.count = data ? 2 : 1;
return (spi_write(ctx->spi, &ctx->spi_cfg, &tx) == 0);
}
static inline uint8_t *get_mac(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
#if defined(CONFIG_IEEE802154_CC1200_RANDOM_MAC)
uint32_t *ptr = (uint32_t *)(cc1200->mac_addr + 4);
UNALIGNED_PUT(sys_rand32_get(), ptr);
cc1200->mac_addr[7] = (cc1200->mac_addr[7] & ~0x01) | 0x02;
#else
cc1200->mac_addr[4] = CONFIG_IEEE802154_CC1200_MAC4;
cc1200->mac_addr[5] = CONFIG_IEEE802154_CC1200_MAC5;
cc1200->mac_addr[6] = CONFIG_IEEE802154_CC1200_MAC6;
cc1200->mac_addr[7] = CONFIG_IEEE802154_CC1200_MAC7;
#endif
cc1200->mac_addr[0] = 0x00;
cc1200->mac_addr[1] = 0x12;
cc1200->mac_addr[2] = 0x4b;
cc1200->mac_addr[3] = 0x00;
return cc1200->mac_addr;
}
static uint8_t get_status(struct cc1200_context *ctx)
{
uint8_t val;
if (z_cc1200_access_reg(ctx, true, CC1200_INS_SNOP,
&val, 1, false, false)) {
/* See Section 3.1.2 */
return val & CC1200_STATUS_MASK;
}
/* We cannot get the status, so let's assume about readyness */
return CC1200_STATUS_CHIP_NOT_READY;
}
/******************
* GPIO functions *
*****************/
static inline void gpio0_int_handler(const struct device *port,
struct gpio_callback *cb, uint32_t pins)
{
struct cc1200_context *cc1200 =
CONTAINER_OF(cb, struct cc1200_context, rx_tx_cb);
if (atomic_get(&cc1200->tx) == 1) {
if (atomic_get(&cc1200->tx_start) == 0) {
atomic_set(&cc1200->tx_start, 1);
} else {
atomic_set(&cc1200->tx, 0);
}
k_sem_give(&cc1200->tx_sync);
} else {
if (atomic_get(&cc1200->rx) == 1) {
k_sem_give(&cc1200->rx_lock);
atomic_set(&cc1200->rx, 0);
} else {
atomic_set(&cc1200->rx, 1);
}
}
}
static void enable_gpio0_interrupt(struct cc1200_context *cc1200, bool enable)
{
gpio_pin_interrupt_configure(
cc1200->gpios[CC1200_GPIO_IDX_GPIO0].dev,
cc1200->gpios[CC1200_GPIO_IDX_GPIO0].pin,
enable ? GPIO_INT_EDGE_TO_ACTIVE : GPIO_INT_DISABLE);
}
static void setup_gpio_callback(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
gpio_init_callback(&cc1200->rx_tx_cb, gpio0_int_handler,
BIT(cc1200->gpios[CC1200_GPIO_IDX_GPIO0].pin));
gpio_add_callback(cc1200->gpios[CC1200_GPIO_IDX_GPIO0].dev,
&cc1200->rx_tx_cb);
}
/****************
* RF functions *
***************/
static uint8_t get_lo_divider(struct cc1200_context *ctx)
{
/* See Table 34 */
return FSD_BANDSELECT(read_reg_fs_cfg(ctx)) << 1;
}
static bool write_reg_freq(struct cc1200_context *ctx, uint32_t freq)
{
uint8_t freq_data[3];
freq_data[0] = (uint8_t)((freq & 0x00FF0000) >> 16);
freq_data[1] = (uint8_t)((freq & 0x0000FF00) >> 8);
freq_data[2] = (uint8_t)(freq & 0x000000FF);
return z_cc1200_access_reg(ctx, false, CC1200_REG_FREQ2,
freq_data, 3, true, true);
}
/* See Section 9.12 - RF programming
*
* The given formula in datasheet cannot be simply applied here, where CPU
* limits us to unsigned integers of 32 bits. Instead, "slicing" it to
* parts that fits in such limit is a solution which is applied below.
*
* The original formula being (freqoff is neglegted):
* Freq = ( RF * Lo_Div * 2^16 ) / Xtal
*
* RF and Xtal are, from here, expressed in KHz.
*
* It first calculates the targeted RF with given ChanCenterFreq0, channel
* spacing and the channel number.
*
* The calculation will slice the targeted RF by multiple of 10:
* 10^n where n is in [5, 3]. The rest, below 1000, is taken at once.
* Let's take the 434000 KHz RF for instance:
* it will be "sliced" in 3 parts: 400000, 30000, 4000.
* Or the 169406 KHz RF, 4 parts: 100000, 60000, 9000, 406.
*
* This permits also to play with Xtal to keep the result big enough to avoid
* losing precision. A factor - growing as much as Xtal decrease - is then
* applied to get to the proper result. Which one is rounded to the nearest
* integer, again to get a bit better precision.
*
* In the end, this algorithm below works for all the supported bands by CC1200.
* User does not need to pass anything extra besides the nominal settings: no
* pre-computed part or else.
*/
static uint32_t rf_evaluate_freq_setting(struct cc1200_context *ctx, uint32_t chan)
{
uint32_t xtal = CONFIG_IEEE802154_CC1200_XOSC;
uint32_t mult_10 = 100000U;
uint32_t factor = 1U;
uint32_t freq = 0U;
uint32_t rf, lo_div;
rf = ctx->rf_settings->chan_center_freq0 +
((chan * (uint32_t)ctx->rf_settings->channel_spacing) / 10U);
lo_div = get_lo_divider(ctx);
LOG_DBG("Calculating freq for %u KHz RF (%u)", rf, lo_div);
while (rf > 0) {
uint32_t hz, freq_tmp, rst;
if (rf < 1000) {
hz = rf;
} else {
hz = rf / mult_10;
hz *= mult_10;
}
if (hz < 1000) {
freq_tmp = (hz * lo_div * 65536U) / xtal;
} else {
freq_tmp = ((hz * lo_div) / xtal) * 65536U;
}
rst = freq_tmp % factor;
freq_tmp /= factor;
if (factor > 1 && (rst/(factor/10U)) > 5) {
freq_tmp++;
}
freq += freq_tmp;
factor *= 10U;
mult_10 /= 10U;
xtal /= 10U;
rf -= hz;
}
LOG_DBG("FREQ is 0x%06X", freq);
return freq;
}
static bool
rf_install_settings(const struct device *dev,
const struct cc1200_rf_registers_set *rf_settings)
{
struct cc1200_context *cc1200 = dev->data;
if (!z_cc1200_access_reg(cc1200, false, CC1200_REG_SYNC3,
(void *)rf_settings->registers,
CC1200_RF_NON_EXT_SPACE_REGS, false, true) ||
!z_cc1200_access_reg(cc1200, false, CC1200_REG_IF_MIX_CFG,
(uint8_t *)rf_settings->registers
+ CC1200_RF_NON_EXT_SPACE_REGS,
CC1200_RF_EXT_SPACE_REGS, true, true) ||
!write_reg_pkt_len(cc1200, 0xFF)) {
LOG_ERR("Could not install RF settings");
return false;
}
cc1200->rf_settings = rf_settings;
return true;
}
static int rf_calibrate(struct cc1200_context *ctx)
{
if (!instruct_scal(ctx)) {
LOG_ERR("Could not calibrate RF");
return -EIO;
}
k_busy_wait(USEC_PER_MSEC * 5U);
/* We need to re-enable RX as SCAL shuts off the freq synth */
if (!instruct_sidle(ctx) ||
!instruct_sfrx(ctx) ||
!instruct_srx(ctx)) {
LOG_ERR("Could not switch to RX");
return -EIO;
}
k_busy_wait(USEC_PER_MSEC * 10U);
cc1200_print_status(get_status(ctx));
return 0;
}
/****************
* TX functions *
***************/
static inline bool write_txfifo(struct cc1200_context *ctx,
void *data, size_t length)
{
return z_cc1200_access_reg(ctx, false,
CC1200_REG_TXFIFO,
data, length, false, true);
}
/****************
* RX functions *
***************/
static inline bool read_rxfifo(struct cc1200_context *ctx,
void *data, size_t length)
{
return z_cc1200_access_reg(ctx, true,
CC1200_REG_RXFIFO,
data, length, false, true);
}
static inline uint8_t get_packet_length(struct cc1200_context *ctx)
{
uint8_t len;
if (z_cc1200_access_reg(ctx, true, CC1200_REG_RXFIFO,
&len, 1, false, true)) {
return len;
}
return 0;
}
static inline bool verify_rxfifo_validity(struct cc1200_context *ctx,
uint8_t pkt_len)
{
/* packet should be at least 3 bytes as a ACK */
if (pkt_len < 3 ||
read_reg_num_rxbytes(ctx) > (pkt_len + CC1200_FCS_LEN)) {
return false;
}
return true;
}
static inline bool read_rxfifo_content(struct cc1200_context *ctx,
struct net_buf *buf, uint8_t len)
{
if (!read_rxfifo(ctx, buf->data, len) ||
(get_status(ctx) == CC1200_STATUS_RX_FIFO_ERROR)) {
return false;
}
net_buf_add(buf, len);
return true;
}
static inline bool verify_crc(struct cc1200_context *ctx, struct net_pkt *pkt)
{
uint8_t fcs[2];
if (!read_rxfifo(ctx, fcs, 2)) {
return false;
}
if (!(fcs[1] & CC1200_FCS_CRC_OK)) {
return false;
}
net_pkt_set_ieee802154_rssi(pkt, fcs[0]);
net_pkt_set_ieee802154_lqi(pkt, fcs[1] & CC1200_FCS_LQI_MASK);
return true;
}
static void cc1200_rx(void *arg)
{
struct cc1200_context *cc1200 = arg;
struct net_pkt *pkt;
uint8_t pkt_len;
while (1) {
pkt = NULL;
k_sem_take(&cc1200->rx_lock, K_FOREVER);
if (get_status(cc1200) == CC1200_STATUS_RX_FIFO_ERROR) {
LOG_ERR("Fifo error");
goto flush;
}
pkt_len = get_packet_length(cc1200);
if (!verify_rxfifo_validity(cc1200, pkt_len)) {
LOG_ERR("Invalid frame");
goto flush;
}
pkt = net_pkt_alloc_with_buffer(cc1200->iface, pkt_len,
AF_UNSPEC, 0, K_NO_WAIT);
if (!pkt) {
LOG_ERR("No free pkt available");
goto flush;
}
if (!read_rxfifo_content(cc1200, pkt->buffer, pkt_len)) {
LOG_ERR("No content read");
goto flush;
}
if (!verify_crc(cc1200, pkt)) {
LOG_ERR("Bad packet CRC");
goto out;
}
if (ieee802154_radio_handle_ack(cc1200->iface, pkt) == NET_OK) {
LOG_DBG("ACK packet handled");
goto out;
}
LOG_DBG("Caught a packet (%u)", pkt_len);
if (net_recv_data(cc1200->iface, pkt) < 0) {
LOG_DBG("Packet dropped by NET stack");
goto out;
}
log_stack_usage(&cc1200->rx_thread);
continue;
flush:
LOG_DBG("Flushing RX");
instruct_sidle(cc1200);
instruct_sfrx(cc1200);
instruct_srx(cc1200);
out:
if (pkt) {
net_pkt_unref(pkt);
}
}
}
/********************
* Radio device API *
*******************/
static enum ieee802154_hw_caps cc1200_get_capabilities(const struct device *dev)
{
return IEEE802154_HW_FCS | IEEE802154_HW_SUB_GHZ;
}
static int cc1200_cca(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
if (atomic_get(&cc1200->rx) == 0) {
uint8_t status = read_reg_rssi0(cc1200);
if (!(status & CARRIER_SENSE) &&
(status & CARRIER_SENSE_VALID)) {
return 0;
}
}
LOG_WRN("Busy");
return -EBUSY;
}
static int cc1200_set_channel(const struct device *dev, uint16_t channel)
{
struct cc1200_context *cc1200 = dev->data;
/* Unlike usual 15.4 chips, cc1200 is closer to a bare metal radio modem
* and thus does not provide any means to select a channel directly, but
* requires instead that one calculates and configures the actual
* targeted frequency for the requested channel.
*
* See rf_evaluate_freq_setting() above.
*/
if (atomic_get(&cc1200->rx) == 0) {
uint32_t freq = rf_evaluate_freq_setting(cc1200, channel);
if (!write_reg_freq(cc1200, freq) ||
rf_calibrate(cc1200)) {
LOG_ERR("Could not set channel %u", channel);
return -EIO;
}
}
return 0;
}
static int cc1200_set_txpower(const struct device *dev, int16_t dbm)
{
struct cc1200_context *cc1200 = dev->data;
uint8_t pa_power_ramp;
LOG_DBG("%d dbm", dbm);
/* See Section 7.1 */
dbm = ((dbm + 18) * 2) - 1;
if ((dbm <= 3) || (dbm >= 64)) {
LOG_ERR("Unhandled value");
return -EINVAL;
}
pa_power_ramp = read_reg_pa_cfg1(cc1200) & ~PA_POWER_RAMP_MASK;
pa_power_ramp |= ((uint8_t) dbm) & PA_POWER_RAMP_MASK;
if (!write_reg_pa_cfg1(cc1200, pa_power_ramp)) {
LOG_ERR("Could not proceed");
return -EIO;
}
return 0;
}
static int cc1200_tx(const struct device *dev,
enum ieee802154_tx_mode mode,
struct net_pkt *pkt,
struct net_buf *frag)
{
struct cc1200_context *cc1200 = dev->data;
uint8_t *frame = frag->data;
uint8_t len = frag->len;
bool status = false;
if (mode != IEEE802154_TX_MODE_DIRECT) {
NET_ERR("TX mode %d not supported", mode);
return -ENOTSUP;
}
LOG_DBG("%p (%u)", frag, len);
/* ToDo:
* Supporting 802.15.4g will require to loop in pkt's frags
* depending on len value, this will also take more time.
*/
if (!instruct_sidle(cc1200) ||
!instruct_sfrx(cc1200) ||
!instruct_sftx(cc1200) ||
!instruct_sfstxon(cc1200)) {
LOG_ERR("Cannot switch to TX mode");
goto out;
}
if (!write_txfifo(cc1200, &len, CC1200_PHY_HDR_LEN) ||
!write_txfifo(cc1200, frame, len) ||
read_reg_num_txbytes(cc1200) != (len + CC1200_PHY_HDR_LEN)) {
LOG_ERR("Cannot fill-in TX fifo");
goto out;
}
atomic_set(&cc1200->tx, 1);
atomic_set(&cc1200->tx_start, 0);
if (!instruct_stx(cc1200)) {
LOG_ERR("Cannot start transmission");
goto out;
}
/* Wait for SYNC to be sent */
k_sem_take(&cc1200->tx_sync, K_MSEC(100));
if (atomic_get(&cc1200->tx_start) == 1) {
/* Now wait for the packet to be fully sent */
k_sem_take(&cc1200->tx_sync, K_MSEC(100));
}
out:
cc1200_print_status(get_status(cc1200));
if (atomic_get(&cc1200->tx) == 1 &&
read_reg_num_txbytes(cc1200) != 0) {
LOG_ERR("TX Failed");
atomic_set(&cc1200->tx_start, 0);
instruct_sftx(cc1200);
status = false;
} else {
status = true;
}
atomic_set(&cc1200->tx, 0);
/* Get back to RX */
instruct_srx(cc1200);
return status ? 0 : -EIO;
}
static int cc1200_start(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
if (!instruct_sidle(cc1200) ||
!instruct_sftx(cc1200) ||
!instruct_sfrx(cc1200) ||
rf_calibrate(cc1200)) {
LOG_ERR("Could not proceed");
return -EIO;
}
enable_gpio0_interrupt(cc1200, true);
cc1200_print_status(get_status(cc1200));
return 0;
}
static int cc1200_stop(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
enable_gpio0_interrupt(cc1200, false);
if (!instruct_spwd(cc1200)) {
LOG_ERR("Could not proceed");
return -EIO;
}
return 0;
}
static uint16_t cc1200_get_channel_count(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
return cc1200->rf_settings->channel_limit;
}
/******************
* Initialization *
*****************/
static int power_on_and_setup(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
if (!instruct_sres(cc1200)) {
LOG_ERR("Cannot reset");
return -EIO;
}
if (!rf_install_settings(dev, &cc1200_rf_settings)) {
return -EIO;
}
if (!write_reg_iocfg3(cc1200, CC1200_IOCFG3) ||
!write_reg_iocfg2(cc1200, CC1200_IOCFG2) ||
!write_reg_iocfg0(cc1200, CC1200_IOCFG0)) {
LOG_ERR("Cannot configure GPIOs");
return -EIO;
}
setup_gpio_callback(dev);
return rf_calibrate(cc1200);
}
static struct cc1200_gpio_configuration *configure_gpios(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
const struct device *gpio = device_get_binding(DT_INST_GPIO_LABEL(0, int_gpios));
if (!gpio) {
return NULL;
}
cc1200->gpios[CC1200_GPIO_IDX_GPIO0].pin = DT_INST_GPIO_PIN(0, int_gpios);
gpio_pin_configure(gpio, cc1200->gpios[CC1200_GPIO_IDX_GPIO0].pin,
GPIO_INPUT | DT_INST_GPIO_FLAGS(0, int_gpios));
cc1200->gpios[CC1200_GPIO_IDX_GPIO0].dev = gpio;
return cc1200->gpios;
}
static int configure_spi(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
cc1200->spi = device_get_binding(DT_INST_BUS_LABEL(0));
if (!cc1200->spi) {
LOG_ERR("Unable to get SPI device");
return -ENODEV;
}
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
cs_ctrl.gpio_dev = device_get_binding(
DT_INST_SPI_DEV_CS_GPIOS_LABEL(0));
if (!cs_ctrl.gpio_dev) {
LOG_ERR("Unable to get GPIO SPI CS device");
return -ENODEV;
}
cs_ctrl.gpio_pin = DT_INST_SPI_DEV_CS_GPIOS_PIN(0);
cs_ctrl.gpio_dt_flags = DT_INST_SPI_DEV_CS_GPIOS_FLAGS(0);
cs_ctrl.delay = 0U;
cc1200->spi_cfg.cs = &cs_ctrl;
LOG_DBG("SPI GPIO CS configured on %s:%u",
DT_INST_SPI_DEV_CS_GPIOS_LABEL(0),
DT_INST_SPI_DEV_CS_GPIOS_PIN(0));
#endif
cc1200->spi_cfg.operation = SPI_WORD_SET(8);
cc1200->spi_cfg.frequency = DT_INST_PROP(0, spi_max_frequency);
cc1200->spi_cfg.slave = DT_INST_REG_ADDR(0);
return 0;
}
static int cc1200_init(const struct device *dev)
{
struct cc1200_context *cc1200 = dev->data;
atomic_set(&cc1200->tx, 0);
atomic_set(&cc1200->tx_start, 0);
atomic_set(&cc1200->rx, 0);
k_sem_init(&cc1200->rx_lock, 0, 1);
k_sem_init(&cc1200->tx_sync, 0, 1);
if (!configure_gpios(dev)) {
LOG_ERR("Configuring GPIOS failed");
return -EIO;
}
if (configure_spi(dev) != 0) {
LOG_ERR("Configuring SPI failed");
return -EIO;
}
LOG_DBG("GPIO and SPI configured");
if (power_on_and_setup(dev) != 0) {
LOG_ERR("Configuring CC1200 failed");
return -EIO;
}
k_thread_create(&cc1200->rx_thread, cc1200->rx_stack,
CONFIG_IEEE802154_CC1200_RX_STACK_SIZE,
(k_thread_entry_t)cc1200_rx,
cc1200, NULL, NULL, K_PRIO_COOP(2), 0, K_NO_WAIT);
k_thread_name_set(&cc1200->rx_thread, "cc1200_rx");
LOG_INF("CC1200 initialized");
return 0;
}
static void cc1200_iface_init(struct net_if *iface)
{
const struct device *dev = net_if_get_device(iface);
struct cc1200_context *cc1200 = dev->data;
uint8_t *mac = get_mac(dev);
LOG_DBG("");
net_if_set_link_addr(iface, mac, 8, NET_LINK_IEEE802154);
cc1200->iface = iface;
ieee802154_init(iface);
}
static struct cc1200_context cc1200_context_data;
static struct ieee802154_radio_api cc1200_radio_api = {
.iface_api.init = cc1200_iface_init,
.get_capabilities = cc1200_get_capabilities,
.cca = cc1200_cca,
.set_channel = cc1200_set_channel,
.set_txpower = cc1200_set_txpower,
.tx = cc1200_tx,
.start = cc1200_start,
.stop = cc1200_stop,
.get_subg_channel_count = cc1200_get_channel_count,
};
NET_DEVICE_INIT(cc1200, CONFIG_IEEE802154_CC1200_DRV_NAME,
cc1200_init, NULL,
&cc1200_context_data, NULL,
CONFIG_IEEE802154_CC1200_INIT_PRIO,
&cc1200_radio_api, IEEE802154_L2,
NET_L2_GET_CTX_TYPE(IEEE802154_L2), 125);