blob: d168715df5f73012d0fef3398e3e5fb7c9ad0ccd [file] [log] [blame]
/*
* Copyright (c) 2017 Justin Watson
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <arm/armv7-m.dtsi>
#include <dt-bindings/i2c/i2c.h>
#include "sam3x-pinctrl.dtsi"
/ {
aliases {
watchdog0 = &wdt;
};
chosen {
zephyr,flash-controller = &eefc;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-m3";
reg = <0>;
};
};
soc {
sram0: memory@20070000 {
compatible = "mmio-sram";
reg = <0x20070000 0x18000>;
};
/* Only used for HWINFO device ID */
eefc: flash-controller@400e0a00 {
compatible = "atmel,sam-flash-controller";
label = "FLASH_CTRL";
reg = <0x400e0a00 0x200>;
peripheral-id = <6>;
#address-cells = <1>;
#size-cells = <1>;
flash0: flash@80000 {
compatible = "soc-nv-flash";
label = "FLASH_0";
reg = <0x00080000 0x80000>;
write-block-size = <16>;
};
};
wdt: watchdog@400e1a50 {
compatible = "atmel,sam-watchdog";
reg = <0x400e1a50 0xc>;
interrupts = <4 0>;
peripheral-id = <4>;
label = "WATCHDOG_0";
status = "disabled";
};
twi0: i2c@4008c000 {
compatible = "atmel,sam-i2c-twi";
clock-frequency = <I2C_BITRATE_STANDARD>;
reg = <0x4008c000 0x128>;
interrupts = <22 0>;
peripheral-id = <22>;
label = "I2C_0";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pa18a_twi0_twck0 &pa17a_twi0_twd0>;
};
twi1: i2c@40090000 {
compatible = "atmel,sam-i2c-twi";
clock-frequency = <I2C_BITRATE_STANDARD>;
reg = <0x40090000 0x128>;
interrupts = <23 0>;
peripheral-id = <23>;
label = "I2C_1";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pb13a_twi1_twck1 &pb12a_twi1_twd1>;
};
uart: uart@400e0800 {
compatible = "atmel,sam-uart";
reg = <0x400e0800 0x124>;
interrupts = <8 1>;
peripheral-id = <8>;
status = "disabled";
label = "UART_0";
pinctrl-0 = <&pa8a_uart_urxd &pa9a_uart_utxd>;
};
usart0: usart@40098000 {
compatible = "atmel,sam-usart";
reg = <0x40098000 0x130>;
interrupts = <17 0>;
peripheral-id = <17>;
status = "disabled";
label = "USART_0";
};
usart1: usart@4009c000 {
compatible = "atmel,sam-usart";
reg = <0x4009c000 0x130>;
interrupts = <18 0>;
peripheral-id = <18>;
status = "disabled";
label = "USART_1";
};
usart2: usart@400a0000 {
compatible = "atmel,sam-usart";
reg = <0x400a0000 0x130>;
interrupts = <19 0>;
peripheral-id = <19>;
status = "disabled";
label = "USART_2";
};
usart3: usart@400a4000 {
compatible = "atmel,sam-usart";
reg = <0x400a4000 0x130>;
interrupts = <20 0>;
peripheral-id = <20>;
status = "disabled";
label = "USART_3";
};
pinctrl@400e0e00 {
compatible = "atmel,sam-pinctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x400e0e00 0x400e0e00 0xc00>;
pioa: pio@400e0e00 {
compatible = "atmel,sam-gpio";
reg = <0x400e0e00 0x190>;
interrupts = <11 1>;
peripheral-id = <11>;
label = "PIO_A";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
piob: pio@400e1000 {
compatible = "atmel,sam-gpio";
reg = <0x400e1000 0x190>;
interrupts = <12 1>;
peripheral-id = <12>;
label = "PIO_B";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
pioc: pio@400e1200 {
compatible = "atmel,sam-gpio";
reg = <0x400e1200 0x190>;
interrupts = <13 1>;
peripheral-id = <13>;
label = "PIO_C";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
piod: pio@400e1400 {
compatible = "atmel,sam-gpio";
reg = <0x400e1400 0x190>;
interrupts = <14 1>;
peripheral-id = <14>;
label = "PIO_D";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
pioe: pio@400e1600 {
compatible = "atmel,sam-gpio";
reg = <0x400e1600 0x190>;
interrupts = <15 1>;
peripheral-id = <15>;
label = "PIO_E";
gpio-controller;
#gpio-cells = <2>;
#atmel,pin-cells = <2>;
};
};
};
};
&nvic {
arm,num-irq-priority-bits = <4>;
};