dts/bindings/flash_controller/nordic,nrf-qspi.yaml

# Copyright (c) 2019 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

description: |
    Properties defining the interface for the Nordic QSPI peripheral.

compatible: "nordic,nrf-qspi"

include: flash-controller.yaml

bus: qspi

properties:
  "#address-cells":
    required: true
    const: 1

  "#size-cells":
    required: true
    const: 0

  interrupts:
    required: true

  sck-pin:
    type: int
    required: true
    description: |
      The SCK pin to use.

      For pins P0.0 through P0.31, use the pin number. For example,
      to use P0.16 for SCK, set:

          sck-pin = <16>;

      For pins P1.0 through P1.31, add 32 to the pin number. For
      example, to use P1.2 for SCK, set:

          sck-pin = <34>;  /* 32 + 2 */
  io-pins:
    type: array
    required: true
    description: |
      Pin numbers associated with IO0 through IO3 signals.

      Examples:

          io-pins = <io0-pin io1-pin>; // two pins

          io-pins = <io0-pin io1-pin io2-pin io3-pin>; // four pins

      Either two or four pins must be configured using this property
      as shown above. The pin numbering scheme is the same as the
      sck-pin property's.
  csn-pins:
    type: array
    required: true
    description: |
      Chip select signal pin number. Exactly one pin should be
      given. The pin numbering scheme is the same as the
      sck-pin property's.