| // SPDX-License-Identifier: Apache-2.0 |
| |
| /* |
| * Copyright (c) 2021 Blue Clover |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf52832_qfaa.dtsi> |
| |
| / { |
| model = "Blue Clover PLT Demo Board V2"; |
| compatible = "nordic,blueclover-plt-demo-v2-nrf52832"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| zephyr,bt-mon-uart = &uart0; |
| zephyr,bt-c2h-uart = &uart0; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| gpios = <&gpio0 26 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button switch 0"; |
| }; |
| button1: button_1 { |
| gpios = <&gpio0 21 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button switch 1"; |
| }; |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| sw0 = &button0; |
| sw1 = &button1; |
| pwm-buzzer = &pwm0; |
| }; |
| }; |
| |
| &gpiote { |
| status ="okay"; |
| }; |
| |
| &gpio0 { |
| status ="okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| compatible = "nordic,nrf-uart"; |
| current-speed = <115200>; |
| tx-pin = <6>; |
| rx-pin = <8>; |
| }; |
| |
| &i2c0 { |
| compatible = "nordic,nrf-twi"; |
| status = "okay"; |
| sda-pin = <12>; |
| scl-pin = <14>; |
| |
| sht3xd@44 { |
| compatible = "sensirion,sht3xd"; |
| reg = <0x44>; |
| label = "SHT3XD"; |
| }; |
| |
| bmi270@68 { |
| compatible = "bosch,bmi270"; |
| reg = <0x68>; |
| label = "BMI270"; |
| }; |
| }; |
| |
| &pwm0 { |
| /* buzzer */ |
| status = "okay"; |
| ch0-pin = <22>; |
| ch0-inverted; |
| }; |
| |
| &spi1 { |
| compatible = "nordic,nrf-spi"; |
| status = "okay"; |
| sck-pin = <2>; |
| mosi-pin = <3>; |
| miso-pin = <27>; /* unused */ |
| |
| apa102@0 { |
| compatible = "apa,apa102"; |
| reg = <0>; |
| spi-max-frequency = <5250000>; |
| label = "APA102"; |
| }; |
| }; |
| |
| &flash0 { |
| /* |
| * For more information, see: |
| * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0xc000>; |
| }; |
| slot0_partition: partition@c000 { |
| label = "image-0"; |
| reg = <0x0000C000 0x32000>; |
| }; |
| slot1_partition: partition@3e000 { |
| label = "image-1"; |
| reg = <0x0003E000 0x32000>; |
| }; |
| scratch_partition: partition@70000 { |
| label = "image-scratch"; |
| reg = <0x00070000 0xa000>; |
| }; |
| storage_partition: partition@7a000 { |
| label = "storage"; |
| reg = <0x0007a000 0x00006000>; |
| }; |
| }; |
| }; |