| .. _google_twinkie_v2_board: |
| |
| Google Twinkie V2 |
| ################# |
| |
| Overview |
| ******** |
| |
| Google Twinkie V2 is a reference board for the google power delivery analyzer |
| (PDA) Twinkie V2. |
| |
| Hardware |
| ******** |
| |
| - STM32G0B1REI6 |
| |
| Supported Features |
| ================== |
| |
| The following features are supported: |
| |
| +-----------+------------+-------------------------------------+ |
| | Interface | Controller | Driver/Component | |
| +===========+============+=====================================+ |
| | PINMUX | on-chip | pinmux | |
| +-----------+------------+-------------------------------------+ |
| | GPIO | on-chip | gpio | |
| +-----------+------------+-------------------------------------+ |
| | CLOCK | on-chip | reset and clock control | |
| +-----------+------------+-------------------------------------+ |
| | FLASH | on-chip | flash memory | |
| +-----------+------------+-------------------------------------+ |
| |
| The default configuration can be found in the defconfig file: |
| ``boards/arm/google_twinkie_v2/google_twinkie_v2_defconfig`` |
| |
| Pin Mapping |
| =========== |
| |
| Default Zephyr Peripheral Mapping: |
| ---------------------------------- |
| - CC1_BUF : PA1 |
| - CC2_BUF : PA3 |
| - VBUS_READ_BUF : PB11 |
| - CSA_VBUS : PC4 |
| - CSA_CC2 : PC5 |
| |
| Programming and Debugging |
| ************************* |
| |
| Build application as usual for the ``google_twinkie_v2`` board, and flash |
| using dfu-util or J-Link. |
| |
| Debugging |
| ========= |
| |
| Use SWD with a J-Link or ST-Link. |
